This heating element is a partially open-style bake element. Carrying 240V and 2000W, it is 19-1/4" wide by 15" long. The two 90-degree push-on male spade terminals are 13-3/4" apart.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly | Will Not Start
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Coryna P - January 6, 2024
Verified Purchase
Easy to replace and repair.
The part came so quickly, faster than expected. It was super simple to repair and install.
★★★★★
★★★★★
Michael B - May 7, 2022
Verified Purchase
Easy install, only place I could find right part
Easy install, item as described. Only thing is I wish the part came with more information.
★★★★★
★★★★★
Peter P - January 8, 2022
Verified Purchase
Fast shipping great transaction
The shipping was very fast. The transaction A1. But the part was not exact the same as the oem. But i find a way to make work. And know my oven work like a New one!
★★★★★
★★★★★
Robert B - December 2, 2021
Verified Purchase
Easy repair
Arrived quickly, no problems whatsoever
★★★★★
★★★★★
Prasad T - October 13, 2021
Verified Purchase
Easy and in good shape
It was in good condition and I'm back in business.
★★★★★
★★★★★
Connie U - August 5, 2021
Verified Purchase
Exactly what we ordered
The packaging and part were in perfect condition! It was easy to install and so far works great.
★★★★★
★★★★★
Debbra T - June 1, 2021
Verified Purchase
fast easy repair
the part came sooner than expected, it installed effortlessly and is working just fine.
★★★★★
★★★★★
Jake R - May 29, 2021
Verified Purchase
Great part
Part came in good time- it fit so we are very happy with your service
★★★★★
★★★★★
Kathy C - May 5, 2021
Verified Purchase
Easy repair
Part worked great, had stove working in 15 minutes! Took a little long to receive through the postal service. Maybe add fedex/UPS shipping at a higher cost to give the option.
★★★★★
★★★★★
Eric C - April 1, 2021
Verified Purchase
Connectors not exactly as original but works
The element connectors were not exactly as the original part and gave me a bit of trouble for reinstalling the part correctly, but it ended up working just fine. Thanks!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 108 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Baking Heating Element Burned Up
Used a screw driver with a socket head to remove the two hex head screws holding the old element. Pulled the old element forward until the two wire attachements were visable. The wires were attached with a simple tab connector. Removed the wires from the element. Attached wires to new element slide the element and wires back into wall of oven and replaced screws. Done!
Other Parts Used:
Christopher from North Salt Lake, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
192 of 201 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
blown bake element
Removed the two screws that hold the element in place at the rear of the oven.Unplug each prob,you may need pliers as they can be a little tight.Reconnected the new element.Keep the old screws.New element does not come with screws.Always unplug range when doing repairs.
Other Parts Used:
joseph from washington, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
59 of 62 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element went out in 20+ year old oven
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Replaced the element and put back in place. Took about 10 minutes. Repair part came in 2 days. Very awesome website!
Other Parts Used:
Dennis from Flatwoods, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
28 of 34 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven wouldnt heat
I assumed the bake element was the problem,so I ordered one from Part Select.I was amazed that I got it in 2 days! After removing the 2 screws that held the element in place,I disconnected the 2 wires from the element.I wasnt being very careful and let one of the wires slip back into the hole in the back of the oven.Couldnt get the wire back out,so I had to take the back of the stove off to get to it.Next time,I'll be careful to keep the wires from going back into the holes.Then I connected the element,screwed it in place an turned the oven on.Success !!!
Other Parts Used:
Matthew from Beverly Hills, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
17 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old element visibly burned out
Unplugged oven, unscrewed element, removed back pannel, unclamped old element and removed it, installed new element, clamped it to wires, screwed element to inside of oven, then replaced back pannel Whole thing took about five minutes.
Other Parts Used:
Jule from New Salem, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
13 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element in the lower unit of the doubleoven broke.
First I disconnnected the breaker for the oven and then removed the broken element by unscrewing the screws that held it in with a nut driver. I then pulled the element out exposing the connected wires. I removed the wires from the element by pulling them off with my fingers. Using a set of hemistat pliers I secured the wires so they wouldn't slip into the holes at the back of the oven. I connected the new element by slipping the connectors onto the element and finished by putting the ends of the element back into the holes and securing it into place with the screws using the nut driver.
Other Parts Used:
Lisa from Helena, MT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken element
First turned off the breaker to the oven, I opened the oven door, took out the baking racks, removed the two screws that hold the element in place. Pulled the element out about 3 inches, disconnected the wires, Installed the new element in the reverse order.
Other Parts Used:
Mike from Hot Springs, AR
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat
I could see a visible burnout on the element. Got it really fast. Removed two screws, pulled it out, disconnected two wires. installed a new one in, and was done!
Other Parts Used:
GREGORY from W Hollywood, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
9 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element burnt out
(e.g. First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires... Really really easy . I am a single woman with no repair experance and had no problems.
Other Parts Used:
linda from plant City, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
surface burners would not work
installed terminal block kits and burners worked great
Ask our experts a question about this part and we'll get back to you as soon as possible!
31 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shirley
February 12, 2019
Hello, i have a Frigidaire stove and need the oven heat element replaced. I do not know the model # and cannot find it any place on/around or under the stove. Is there a Generic heating element that will fit?Thank you
Hi Shirley,
Thank you for your question. If you are looking for the heating element for your stove, you may be able to find it on our website. Under Appliance Parts For on our website, you will find icons of various appliances. Click on the stove icon and the next page that comes up will allow you to choose the brand of the stove, the part you are looking for, the size, the material the part is made of and the color of the part. This will allow you to narrow the search for the part you are looking for. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
November 30, 2017
The part #ps453960 says it is a 240v, my oven is a 220v is the element compatible?
For model number ps453960
Hi Carol,
Thank you for your question. Before we can assist you further we would need the model number from your appliance. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Lisa
April 24, 2018
I can't find the replacement heating element for my model. Is there a compatible part i can use
For model number Rg35hw2
Hi Lisa,
Thank you for your question. The part number listed under your model number for the bake element is PS453960. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Marlene
December 6, 2017
Do you have a heating element for my model ? It’s a Frigidaire
For model number RG35AW
Hi Marlene,
Thank you for your question. Yes, this would be the correct bake element for your appliance. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Andrew
October 16, 2019
Do you carry the replacement bake element and large coiled stove top element? What are the part numbers. Its for a Kenmore
For model number 970-515822
Hello Andrew, thank you for inquiring. I was able to locate a parts list for your model range, and the replacement Bake Element for it is part number PS438018. The replacement 8" Surface Element for it is part number PS2339242. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
December 24, 2019
I am looking for the top oven element for model number 970C648520. They say they do not have that model.
Hi Linda,
Thank you for your question. We do not have your model number listed on our website, but we were able to find the information for you online. The part number listed under your model number for the broil element is PS439673. We hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Denise
December 28, 2019
Will this fit the model # of my stove, to replace the heating element.
For model number Cwef310gsc
Hello Denise and thank you for writing.
No, but bake element part number: PS438018 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Debbie
August 13, 2019
Is this bake element for the self cleaning Frigidaire oven? Thank you.
For model number CFEF366EMK
Hello Debbie, thank you for contacting us. This Bake Element is not shown as compatible to your model. The replacement for your model is part number PS438018. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Yolanda
April 29, 2019
Frigidaire oven. I need a new element on bottom of oven
For model number FEF366ECD
Hello Yolanda, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS438018. Hope this helps!
Help! Do not know what element to order. Is this compatible with my Kenmore range?
For model number 970-606020
Hello Jemma, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
