This motor runs the evaporator fan in your refrigerator. It is mounted on the center hub and has three lead wires terminals. This motor rotates in a clockwise fashion. Its shaft has a diameter of 1/8" and is 1-1/4" long.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Evaporator Fan Motor Kit
Troubleshooting
This part fixes the following symptoms:
Noisy | Fridge too warm | Freezer section too warm
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
George P - November 7, 2021
Verified Purchase
Easy inasall
Easy install fast delivery
★★★★★
★★★★★
Ken M - March 22, 2020
Verified Purchase
no problems
fast service , the picture makes it so easy!
★★★★★
★★★★★
Aziz M - August 5, 2023
Verified Purchase
Easy to repair
Good service even the equipment was out of stock
★★★★★
★★★★★
Guthrie S - December 17, 2018
Verified Purchase
Not as easy as the video
The part arrived really fast I opened the box and the fan motor drive shaft was slightly bent we had to take the entire freezer section apart to get the old motor out and replace it the butt connectors were a really nice touch as our plug was different give your self at least 2 hrs to do this repair the fridge freezer works well
★★★★★
★★★★★
John A - February 20, 2019
Verified Purchase
Replacement of fan motor
The repairs went reasonably well and as expected. Unfortunately I still find the motor to be rather load when running. There seems to be a vibrating sound that to me sounds louder than it should.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 11 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Noisy fan
1. Removed the 7 nuts using the nut driver from the freezer back panel inside the freezer. 2. Remove the back panel. The evaporator motor and fan are located above the coils. 3. Unplug the wiring harness. 4. Remove the two gold mounting screws holding the motor and fan in place. 5. Remove the motor and fan including the brackets. 6. Install the new motor and fan onto the mounting bracket. 6a. Attach the green ground to the mounting bracket. 7. Screw the two gold screws back into the freezer. 8. Attach the new wiring harness. Note, the old harness had a mounting hole/space for it to connect to the wiring harness of the freezer. The new motor's harness was not long enough for this, so it is connected freely to the freezer harness. 9. Use the hair dryer to melt any ice that may have formed on the coils and hole where the fan goes. 10. Turn the freezer on to see if the fan turns on. 11. Reinstall the back panel. All done!
The fan motor all but caught the inside of the freezer on fire . Had to remove then clean, and I mean clean the walls of the freezer . Then had to pry out the old fan without breaking anything . Replacement of new fan was quick and easy because all the parts that I needed were in the bag
took cover off inside freezer control . removed old fan and unpluged wire harness plugged new one up and fastened back in place and put control cover back on.
Other Parts Used:
Kenneth from Springfield,, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
11 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer starter acumulating lots of ice and the lower part of fridge was not cooling at all.
just took the back cover of the freezer of and then the fan. To do this, I just removed like four bolts at the corners and then four bolts that attached the fan to the cover. At the end, I just unplugged the cables. I got my new fan the very next day, which was like extremly fast, plug in the cables and attached the fan to the cover and then attached the cover to the original place. It's a pretty simple repair. My fridge is now working like it should be.
Other Parts Used:
alonso from Compton, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the evaporator fan stopped working
I removed the plastic cowl in the rear of the freezer to gain access to the fan, took out two screws that secured the brackets holding the fan. Then I separated the coupling wires which had a sort of locking mechanism that was simple to undue. I took out the brackets along with the fan, separated the brackets and removed the screw for the ground wire. Then I simply reversed the process.
Other Parts Used:
Stephen from Bloomfield, NJ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
8 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fan motor worn out
Removed the old and installed the new. Electrical plug/socket made connection easy. Biggest problem is working space in freezer side of a side by side with the fan in the back. If I can do it anyone can.
Other Parts Used:
Richard from Norman, OK
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thought the evaporator fan was the issue
Did the obvious. Removed the stick-out cover, then the back of the freezer wall, after taking the bad evaporator fan out. Replaced the old motor with the new one, stuck the fan blades back on, and put the replacement back in place. Checked to see that the new motor and fan, before final hook up, had no issues. That was a success. However, when I put the parts in place, I had some significant vibrations. By taking things apart and re-doing the install, the vibrations went away. However, the final install, even if quiet, did not work. Apparently the condenser was kaput. No cooling after all the adjustments. We gave up and are replacing the fridge.
Other Parts Used:
Dale from Fort Myers, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the evaporator fan quit when we had a power surge
A screw driver was used to remove two screws that held the old fan in place the new fan ws installed exactly where the old one came out and presto the job was complete. No major deal.
Other Parts Used:
Darrell from Bentley, ND
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor squeal
I didn’t do the repair because the new motor had a female pigtail connector while the original motor has male connection. It came with wire clamps but didn’t want to cut wires to make repair. The pictures online show a male connection. Put the old motor back in and now it works fine.
Other Parts Used:
Mark from Partlow, VA
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The original fan motor began masking a noise and finally stoped working.
Followed video instruction and completed the replacement. I had to join the wires since the connector was a male plug to a make plug.
Other Parts Used:
Justin from FRANKLIN, TN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Martin
September 15, 2017
My fan evaporator has four wires, does this part work with this model?
For model number LGHS2644KM1
Hi Martin,
Thank you for your inquiry. This evaporator fan motor will not work on your appliance. The correct evaporator fan motor listed under your model number is part number PS1526073. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Tami
August 24, 2017
Just want to make sure I am getting the right part..had a power surge and the freezer still works but the refrigerator is cool but not cool enough, the fan inside the refrigerator isn't turning, so I am assuming that it is the evaporator fan motor kit that I need... I just want to get a professional opinion before I buy a part... I will be replacing it myself, so I have read the articles on this part and watched the video... can you please give me some insight from a professional to whether I am getting the right part...Thank you so very much..Tami
For model number TSK210JN0W
Hi Tami,
Thank you for sending in your question. Yes if the fan motor is not on and running I would suggest you start with replacing the Evaporator Fan Motor.
Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Lecompte Claude
September 17, 2019
On this model i had to take out the bottom panel. In doing this. I accidentally unhook a Green wire with a clamp coming from the motor and that i do no know where to fix it now. Thanks.....
For model number RA1816DW3
Hello Lecompte, thank you for your question. The green wire is a ground wire. Attach the green ground to the mounting bracket. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
January 15, 2022
Hello, Will this part work for my model#? My freezer is making a loud grinding/metal scraping noise when the evaporator fan is turning.
For model number FRT22IRSH
Hello James, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS450319. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jorge
November 9, 2022
PS450319 Does this part work with my model ?
For model number FRT16CRHW4
Hello Jorge, thank you for contacting us. Yes, this evaporator fan motor, part number PS450319, will work with your refrigerator, model number FRT16CRHW4. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cindy
April 18, 2019
I need to replace the evaporator fan motor, i noticed 2 different types available, not sure which one to order - part number - ps2349477 or ps450319, the part looks a like, don't know which one to order..can you please provide assistance on this?
For model number KRS220RHY0
Hello Cindy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS2349477. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ron
February 21, 2018
My evaporator fan is very noisy. So i need to replace that. However, the refrigerator does not shut off. Temp in freezer is 1 f. So, the temperature is ok, why is it not shutting off?Thanks (i do not have a manual for this Tappan refrigerator). It seems not to have coils beneath the refrigerator nor a blower on the compressor.
For model number MRT15DRCW
Hi Ron,
Thank you for your question. If your temperature is fine in both your fridge and your freezer then the evaporator fan motor should just be doing its job. That part basically circulates the cold air through the freezer and up into the fridge. It is likely just maintaining the temperature in both places for you. You could take a look at your defrost thermostat and your evaporator fan motor to double check, but it sounds like your appliance is fine. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Phay
November 21, 2018
Hello, does this kit include the fan blade? Or does the fan blade need to be purchased separately? If so, what fan blade do you recommend?Thank-you
Hello Phay, thank you for your question. The fan motor does not come with the blade. The blade we would recommend is 5308000010. I hope this helps!
Was this helpful?
Thank you for voting!
Jason
December 22, 2022
is this evap motor compatible with my model?
For model number FFHD2250TS8
Hello Jason, thank you for the great question. This part does not fit your model. The evaporator fan motor that will fit your model is part number PS11775846. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Will this motor fit this model fridge? My model number doesn’t have any more letters or numbers after the ‘DRH’ letters.
For model number FRT18DRH
Hello Chris, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS450319. Thank you for your inquiry, good luck with this repair!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS450319
Manufacturer Part Number: 5300158289
