This gasket is intended for use with upright freezers.
This white door gasket is used to make an air-tight seal for the cabinet when the door is closed
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Frost buildup
This part works with the following products:
Freezer.
This part works with the following products:
Frigidaire, Gibson, Kenmore, Electrolux.
Part# 3206261 replaces these:
AP2132663, 1228, 3206261, 06599896, 08005538, 08016360, 3201031, 3205375, 3206262, 3206263, 3206264, 3206265, 5300125008, 5300129798, 6599896, 8005538, 8016360, F000125008, F0112642-4, F0122543-5
...
Show more
, F112642-4, F122543-5, F125008, F126005, F129798, R000901073
Show less
Customer Repair Stories
Average Repair Rating: 2.7 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The freezer was going into alarm
We loosened all the screws around the door and slid out the old gasket. We then slid the new gasket behind the panel and screwed the screws back in place.
Other Parts Used:
Sharon from Green Valley Lake, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
35 of 42 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer developing ice inside
hardest part was to remove deformities using a hair dryer. Working with hand after heating seemed to work but was not quick. Loosen screws under old gasket. Screws hold gasket lip under the edge of the door liner. Remove old gasket. As door liner was brittle from age, I used silicone caulk across top of door behind flange, set lip of gasket in silicone and tighten screws. Did top and half was down the side, then did the bottom up, taking ank excess gasket and trying to distribute along straight side. Make sure door is plum and square on hinges, then close door. Turned freezer on and allow to cool to see if ice would form, before refilling with food.
Other Parts Used:
Ronald R from BAHAMA, NC
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace upright freezer door gasket.
The easiest way to replace this gasket is to remove the door from the freezer. Two bolts remove the top hinge and the door pops off. Setting it on sawhorses makes the job easy. In addition, I moved the door into the sunlight which made the gasket flexible and easy to work with.
Remove the screws under the gasket with a phillips screwdriver and lift the inner panel off the door. Clean the area when the gasket sits, put the new gasket in place and replace the inner panel and all the screws.
Other Parts Used:
Bill from UNION, ME
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Harold
August 8, 2018
Can you give me the actual dimensions for door seal # 3206256? My old one measures 31 1/4 x 65 1/2.
Hi Harold, Thank you for your question. This particular part actually measures 31 1/4" x 67". I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
April 6, 2022
I have a sears upright freezer. believe made by Frigidaire in USA. I can't search by model number. Need door gasket measuring 31.25 x 65.5 x .75 inches. Would PS447460 , manufacture part # 3206261 work? Thank you Robert
For model number 970180021
Hello Robert, Thank you for the question. This Gasket is approximately 31 1/4" x 67". If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bryan
July 27, 2021
This is the freezer seal that is recommended on your site, but the measurements in the previous answer do not match the measurements that are on my freezer. Where can I get the correct freeze door seal that measures 31 1/8" by 54 1/4"?
For model number MFU21M3BW4
Hello Bryan, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS447460. The Measurements are an estimate. The model number tells us what parts are guaranteed to fit your appliance. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
