Average Repair Rating: 2.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Noisy spin cycle
1) Unplugged washer and disconnected the hot and cold hoses. 2) removed the 2 phillips screws at the bottom of the front panel then removed front panel, you need enough clearance by the floor, this is tricky because you have to lean washer back and push down on the front panel. 3) removed the agitator from the washer 4) lifted top of washer and leaned back against the wall and removed the splash tub cover one clip at a time with a flat screw driver. 5) removed the trunion, this is difficult and will take some time due to the corrosion from many years of use use a hammer (3Lb short handle) and tap one side then the other. You will need to rock it back and forth awhile. 6) lift the basket out of splash tub 7) I removed the hose for water level and removed the 3 bolts that hold the splash tub to the three base mounts (support arms). 8) remove the splash tub 9)change the plastic washer that is between the splash tub and the transmission in the bottom of the splash tub 10) change the bearing(metal sleeve) on the bottom of splash tub and lightly grease w/ a thin film of teflon grease 11) install splash tub and install the 3 bolts along w/ the water level tube 12) install the larger seal (w/ spring in it) and push into the splash tub firmly 13) use some tub and faucet silicone grease on the smaller seal because you don't want to damage this main seal, install the main seal (sits on top of the larger one that's in the tub already) be careful when getting to flat part of the shaft when installing ( spin around the shaft as you pass this point) it will keep the seal from coming out. 14) install trunion (sits down on top of the seal) you will feel the tension of the spring when bolting the trunion back into place. 15) install basket and bolt it to the trunion (I installed a new filter on the bottom of the basket and required some special glue, ask for "3M" GMGA600 adhesive. 16) installed splash tub cover, agitator and front cover. Washer works great and is quieter than it was new.
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nancy
August 12, 2019
Washer suddenly makes very loud screech in spin cycle...
For model number GLET1142SC0
Hi Nancy, thank you for your question. You may want to take a look at your Spin Bearing to see if it needs to be replaced. However if that part is fine then the issue might be in your transmission. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Vince
October 30, 2019
Machine is very noisy when in spin cycle. Would replacing the spin bearing fix the problem?
For model number GCET1031FS4
Hello Vince, thank you for inquiring. Yes, this Spin Bearing may be the source of the problem. You may also want to consider either the Drive V-Belt, part number PS1146950, or the Tension Idler Pulley, part number PS418897 for your model. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
January 14, 2019
How is the inner outer drum is remove from stakleble washer/dryer frigidare brand
For model number FGX831CS1
Hi Robert, thank you for your question. Removing the drum is fairly similar in a stackable and a stand alone machine. We have a video that will show you how it is generally done on a stand alone. You should be able to use that to removing the one on your model: https://www.youtube.com/watch?v=rwhgUmZ15eY&t=194s. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Chad
May 14, 2019
Our washer (20 years old but still running strong) has developed a knocking sound during the spin cycle. Might this be an issue with the spin bearing, or belt/tension pulley? No leaks that i can detect; no excessive movement during the spin cycle. Just a constant knocking sound during the spin cycle, even if the tub is empty.
For model number FWS445RFS1 (Frigidaire)
Hello Chad, thank you for your question. We would recommend replacing the Upper Spin Bearing Washer Part #: PS473382 and Spin Bearing Part #: PS446536. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS446536
Manufacturer Part Number: 3204405
