This broil element is located on the top inside the oven.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when broiling | Little to no heat when baking
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Tappan.
Part# 316203200 replaces these:
AP2126395, 832973, 316203200
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tony I - April 19, 2023
Verified Purchase
Exactly what I needed.
Quality part arrived fast.
★★★★★
★★★★★
Dan M - December 5, 2018
Verified Purchase
Easy repair
Removed power cord from outlet, Took the back cover off, remove two spade terminal connectors, opened oven door undid the 4 screw holding it in place. replaced for new Element and then put back together. 20min Max. Parts were easy to find and shipped really fast. i will definitely be using Partselect again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top Broiler element burned out
I disconnected power cord. Removed cooking racks. Removed element mounting screws. Removed back panel and removed wires on both ends. Pulled element out put new one in and bolted down. Reconnected wires. Put rear cover on. Plugged in and checked for correct opreation. OK!
Other Parts Used:
Richard from Alexander City, AL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
40 of 53 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom elerment burnt into
First i removed the two screws that hold the element in place. I the pulled the element out about 3 inches and disconnect the 2 wires. The new one didn't come with the little holders at the front of the element and were very hard to get loose from the old element .i finally got them back on the new one and put it back in the stove. Pretty simple job though.
Other Parts Used:
Danny from Gaffney, SC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broil element was bad.
It was a little difficult by my self an extra hand would of made it much easier.I unscrewed the screws pulled the wires from the back of the oven which took a few minutes.I am not great at fixing things but once I got the old one out it went smoother than I expected.it took about 25-30 minutes with an extra hand could have made it 10 minutes.not bad over all for me.did I mention not very handy.did stun the wife that I fixed it on my own.thanks Bill
Other Parts Used:
William from Fort Myers, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electrical connection pulled off the element
When I pulled the element out of the back panel of the oven to remove it, the electrical connection got caught on the edge of the hole in the panel and disappeared back into the oven insulation. It was difficult to find and pull it back out to reinstall it on the new element.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
DAVE BRYCE
May 16, 2019
How do you test for what part you need no heat in oven broil or cook they do not work
For model number CFEF312FBB
Hello Dave, thank you for your question. First you will unplug the unit and remove the elements to test them. With a multimeter test for continuity on the elements. If there is no continuity the elements have to be replaced. Then test the oven sensor probe PartSelect Number PS11731754. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the sensor tests within those ranges, the electronic board should be replaced. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Tammy
August 5, 2019
Where is the broiler on this oven? And what is the bottom drawer used for?
For model number FEF365BDW
Hi Tammy, thank you for your question. The broiler is the element at the top of your oven. It looks like your drawer is a storage drawer. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
The Oven Bake Element is a black, metal part which supplies heat to the oven. This element is 19-1/2" wide x 18-1/2" long and has 3-1/2" inserts. It is rated as "Easy" to install by users, and attaches to the bottom of t...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS439671
Manufacturer Part Number: 316203200
