You can select what size surface to use according to the size of your pots and pans.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Kenmore, Frigidaire, Tappan.
Part# 5304528972 replaces these:
316049800
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
burner knob post busted off....and burner element burned out
My husband opened the oven door.He removed the metal strip at the top just under where the knobs are.I held the top of the stove up while he unscrewed the 2 screws on either side of where the knob goes and he unplugged the connectors on the switch assembly one at a time a reconnected the new ones. We slid the post through the hole and lined up the two holes put the screws back in. Walah. I cont. holding up stove he got a socket to unscrew the strip holding the back elements in place. He undid just the one side used pliers to squeeze clamp together pushed the little post through the slot....unplugged the connectors keeping track of them. He used a screwdriver to unscrew clamps to screw them onto the new element at the same number as he took them off the old element. We popped the new element back in hooking up all connectors poked the little clamp posts through the holes attached the screw that is the strip holding elements in place. We closed the stovetop We lined the metal strip up at top of oven door underneath the knobs and put the 4 screws back in and closed the door. Done. I would say it took maybe 30 min.if that. Works like a champ.
found your website ,asked the question, got an answer, recieved a diagram and a possible problem diagnosis. obtained the part threw PartSelect quickly. took the knob off unscrewed two screws out ,disconnected the terminals and reconnected to new switch put the two screws back in and put the knob on!!! thanks ncountry "
Other Parts Used:
Billie from Arlington, WA
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
6 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner quit working
Received the new part FAST. Ordered online. Easy to plug in the new part. Will use PartSelect.com again when needed to order parts!
Other Parts Used:
Abe from Manson, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Irmgard
August 2, 2021
We were given the part # of the front burner of our Kenmore electric range, pt. # 5304528972 ; it is available but it says made by "Frigidaire". I wonder will that work on our Kenmore? We called appliances repair inc. But they didn't fix it correctly and told us we should order the part and then they will install it. Please advise! Thanks.
For model number 790.9285
Hello Irmgard, Thank you for your question. Your model number begins with the prefix 790. and this means that it was manufacturered by Frigidaire. Based on the model, you have chosen the correct PartSelect Number PS16544410. Good luck with your repair!
Was this helpful?
Thank you for voting!
Ken
August 25, 2022
Left front burner only stays on high, does not adjust when choosing other settings. Multi sizes burner and both small and large only burn high. We use it for boiling water but would sure like it to be functional. Thank you!
For model number Fef389wfch
Hey Ken, thank you for your inquiry. We have researched your model and found that if your burners stay only on high then most likely the problem is with its switches. You may need to replace the switches, part numbers PS16544410, and PS1145039. If you require assistance to place an order, please contact customer service. We hope that helps!
