Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Roberta B - July 20, 2022
Verified Purchase
Stove rear drawer slides - Sanity for under thirty dollars!
So I’m renting a condo and the stove’s bottom pot drawer had broken rear drawer slides. So you know the story, crash bang on the tile floor - hard to pull out - hard to slide in - just a nightmare! But with my new drawer slides - the drawer slides in and out with ease and no bumping and crashing. Thanks PartSelect - $30 dollar fix (with shipping to BC). Problem solved!
★★★★★
★★★★★
Ried D - January 14, 2022
Verified Purchase
Worked exactly as expected
I bought two of these and they work as I expected. Have been using them in the drawer for about a month and expect they will last awhile
★★★★★
★★★★★
Ned L - September 17, 2021
Verified Purchase
As advertised, easily installed
As advertised, easily installed. What can I say… It’s a piece of plastic ;)
★★★★★
★★★★★
CHRISTIAN D - May 27, 2020
Verified Purchase
As expected
Perfect.
★★★★★
★★★★★
Leilani M - May 18, 2019
Verified Purchase
Simple and straight forward repair.
I received the exact parts I needed and happy with the service and availability of the parts.
★★★★★
★★★★★
Riley W - February 5, 2019
Verified Purchase
Easy repair
Came fast, easy fix to the drawer.
★★★★★
★★★★★
Shaun H - January 17, 2019
Verified Purchase
Exactly as advertised.
Part was fine, shipping was expensive.
★★★★★
★★★★★
Liping C - January 2, 2019
Verified Purchase
worked as expected
good, biter late for shipping
★★★★★
★★★★★
Lana D - November 19, 2018
Verified Purchase
Easy
An easy purchase and item came promptly!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 48 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
drawer glides were broke on front and back
used a screwdriver pushed the old ones out put the new in. the video instructions were great.
rental property stove only had 2 working burners and bottom drawer off track
first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case. As far as the drawer glides they just snap into place
Frst I slid the drawer out.I then pryed the broken drawer glides off with a flat blade screwdriver. The new drawer glides then just snap into place,then reinstall the drawer and check for smooth operation.
The two back door glides were missing and broken (one of each), and needed to be replaced. Finding the parts online was MUCH easier than I expected,and the repair was remarkably simple. Parts snapped into place, the drawer had to be lined up, and it slid right into place. Very easy!
Other Parts Used:
Scott from Noblesville, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
100 of 165 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not shut off
I simply removed 6 screws holding the back cover removed 4 wires from the old clock removed the 4 screws holding the clock. set new clock in place put the 4 screws back in reattaced 4 wires replaced the cover.
drawer was tilting and wouldn't slide open easily.
The old glides were broken off so I didn't know I needed these glides until I saw the parts section of the Manuel. When they arrived I snapped them in with no effort at all. P.S. The shipping is fantastic here......i ordered on Monday received them on Tuesday. Now that's shipping:>)
Other Parts Used:
jennifer from La Habra, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
75 of 76 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven drawer fell out
Removed the one remaining drawer guide and stared at it for 10 minutes trying to understand where it came from and how it worked. Looked it up on partselect.com. While there was no part number, the detailed photo on your web site was enought to assure me that you had the correct part. Ordered them in a few moments and three days later I had the parts. The hardest part of the job was trying to understand how to install the widgets. After 20 minutes to crawling around in the stove's inards, I finally got the "aha" and the drawer on this antique stove was finished. Thanks! Couldn't have done it without you.
Other Parts Used:
Donald from Gainesville, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
14 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Overlay was cracked, drawer glide missing
Overlay replacement is easy; 1st remove two screws that hold panel to top of stove (philips screwdriver) and lift up off of lip at very top, 2nd remove two screws that hold control to panel (nutdriver or square drive screwdriver), 3rd peel old overlay from control panel face (make sure you get any & all little bits so new overlay sits flush), 4th peel backing from overlay and position over control panel (peel protective film from face of overlay as well), 5th reposition control panel and reinstall two screws removed in step two above, lastly reposition top panel on stove and reinstall the two screws removed in step one above. Drawer glide just snaps into place on the lower rear corners of drawer, then you slide drawer back into place.
New part arrived, opened pkg. , Pulled drawer out. . . Snapped in new parts. . . . Done!! Saved myself $100. 00.
Other Parts Used:
Kathleen from fall river, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
9 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trim Handles Broken during moving
Used a paint spatula to pop upwards the old bottom half of the door handle trim, has metal inserts inbetween pieces. Snapped new ones on. Was initially intimidated, but only took 5 minutes to replace both.
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathie
November 8, 2018
The front drawer glide bracket that fits into the oven itself (also white plastic) is broken.Do you sell the replacement front drawer glide bracket?
For model number 316246615
Hi Kathie,
Thank you for your question. Yes, we do carry the front drawer glide. The part number listed under your model number for the front drawer glide is PS434226. I hope this helps. Thank you and have a great day!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Sheila
August 14, 2019
How many are in a package
For model number part # 3051163
Hello Sheila, thank you for your question. This Rear Drawer Glide is sold individually. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Jeanne
February 27, 2020
The rear drawer guide. Is there one or two in pack.Thank you
For model number fef352awd
Hi Jean,
Thank you for your question. The drawer glides are sold individually. We hope this helps. Thank you and have a great day.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
December 14, 2021
Where and how do I replace p/n 3051163on my electric stove
You help will be very appreciated
Thanks
For model number 790.95301100
Hello Richard, Thank you for your inquiry. We have included a link to our repair video for this part, and if you need help placing an order for this part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Daniel
February 9, 2022
Do these rear door glides fit my old Kenmore
For model number 91195492300
Hello Daniel, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12709839. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
April 18, 2022
When you turn stove off the pre heat light stays on and won't go off
For model number MEF352BGWD
Hi Joe,
Thank you for your question. If the preheat light remains on once the stove has been turned off, the issue may be with the oven sensor. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to turn the elements on and off. Before removing this part from the oven and testing it with a multimeter for continuity, unplug the oven from the electrical outlet. A normal reading should be 1100 ohms, but as readings vary from model to model, you will need to reference your owner’s manual to determine what the correct reading should be. To test it for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, you will then need to check the elements, the electronic control board and the wiring between the parts to see which one is causing the issue. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
I need front door glides for bottom drawer of stove. What is part number and how much? I probably need to replace the rear ones while I have it out so provide that info also.
For model number ME1"322WGSB
Hello Claude, thank you for writing. Based on model MEF322WBSE, the front glide is PS434226. And, the Rear Drawer Glide is part PS434227. We have videos for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Hello. Does this fit Frigidaire stove fef366bcc?
Thanks,
Sean
Hello Sean, thank you for your question. We have researched your model and found that part number PS434227 is compatible with your model. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Nathan
December 26, 2022
I need to fix one of the bottom drawer glides on my range located not on the actual drawer, but one the stove. I'm trying to determine which part to order to repair this. hopefully you are able to help me. Which part do I order and if I decide to replace all the glides, what do I order? Thanks for you help.
For model number fef376cjbb
Hi Nathan, thank you for the great question. There are two types of drawer glides in your range: the front glide drawer, part number PS434226, and the rear glide drawer, part number PS434227. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
