This manufacturer-certified drawer support rail supports the right side of the sliding drawer. It is a track that helps the drawer slide open and closed with ease. If you are having trouble opening or closing your fresh food drawer, check the support rails for any blockage, or visible damage. If the rail is damaged, it should be replaced to ensure no further damage is done to the drawer itself. The repair is straightforward: unscrew and remove the existing support rail, then fasten the new rail in place. This genuine OEM replacement part is made of plastic and is white in color. NOTE: This part is sold separately from the left side drawer support rail. The part measures approximately 16 inches long by 1 inch high.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Crosley.
Part# 240530701 replaces these:
AP2116590, 917558, 240530701, 240460501
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
July 8, 2019
Right or left? Is this the rail for the side of the drawer on my right or the fridge's right side?
For model number FRT21IL4FW4
Hello Patrick, Thank you for the question. It will be your left or right as you stand in front of the appliance facing it. Hope this helps!
45 people found this helpful.
Was this helpful?
Thank you for voting!
Laura
August 13, 2017
Just wondering if this is for the lunch meat drawer in the center of the fridge, on the left side. Want to make sure its not one of the crisper drawers on the bottom of the fridge.
For model number FRT18G4AWC
Hi Laura,
This is the right side rail for your meat drawer. I have attached the part number for your left side. Good luck with your repair!
I'm looking for the part number for the ride side support for the meat drawer in this refrigerant. The existing one is sagging probably due to us putting too much meat and cheese in the drawer.
For model number FFTR2021QW8A
Hello Dave, thank you for your question. The right side support for the meat drawer is part number Drawer Support Rail - Right Side Part Number: 240530701. Good luck with your repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Victoria
December 12, 2018
Will this right side drawer support rail work for my fridge model number lfht 1817lf1 ?
Hello Victoria, thank you for your question. Yes, this is the correct Right side support rail (right side as you're looking into the unit) for your specific model. Good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
April 4, 2019
On my meat tray on top shelf right side rail and tab is broken what do i need to order?
For model number FRT21IL4FW8
Hello Carol, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part #: PS430917. Thank you for your inquiry, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Natalie
November 4, 2017
Does this part work for my model number? Thank you!
For model number FRT18G4AW
Hi Natalie, Thank you for the question. The rail for the meat pan on your appliance model number is PartSelect Number PS430244.This is the right side rail that supports the smaller meat pan at the top. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Harriet
April 24, 2018
Will the right-side meat drawer support rail that you sell work on my model? Ours is broken. Your list of compatible models does not include the above model number. Thank you!
For model number FRT18IL6JW3
Hi Harriet,
Thank you for your question. Based on the model number you provided, the supports for the meat pan are included with the frame that the drawer slides under. The part number listed under your model number for the Spill Safe Shelf with Glass is PS1991246. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
TK
November 9, 2019
The meat tray falls off the rails is there something missing or broken on it.
For model number MRT18NREW1
Hi TK, it is either the rail or the tray, you will have to inspect the parts to tell. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Keshia
March 21, 2018
I'm looking for the right side meat hanger will this fit my refrigerator part number fftr1821qw2 thank you
For model number Fftr1821qw2
Hello Keshia, thank you for your question. Yes, the correct right side meat drawer hanger for your model number is part number Drawer Support Rail - Right Side Part Number: 240530701. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Matt
October 24, 2017
Hi, on my refrigerator, there is a center bracket on the shelf that is above the crisper drawer. I don't see that on your diagram. Mine looks like it is not holding up that shelf...it's not connected to the front of the shelf. is there a bracket for that? thanks.
For model number 25361462100
Hi Matt,
Thank you for your question. Unfortunately no, for the shelf that is directly above your crisper drawers, it is all one piece. If you need to replace something on it you would have to replace the entire shelf. I hope that helps. Good luck with your repair.
Drawer rail was snapped so it would not support the drawer
Took whole shelf out. Unscrewed the old rail, screwed in the new rail. Female 55yrs old. I broke it myself and fixed it myself! Very easy!!!!
Other Parts Used:
wendy from sandown, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
38 of 42 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
overloaded the meat tray with a 3 lb package of cheese slices the right side rail broke
removed the screws in the piece of the rail that was still attached and replace with new one - hardest part was the screw it was so little I started it without the magnetic screw driver - it took about 20 minutes
Slipped the new handle right on and tightened the screws, removed broken support rail and easily put the new one in its.place,tightened the screw and it was done
Pull out the shelf and remove the one screw that holds the support rail in place. Remove broken rail, slip in the new one, then replace the screw. Done!
It takes longer to remove items from shelf and clean it than it does to replace the part.
Other Parts Used:
Henry from Newbury, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
13 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ends broke from the rails.
I unscrewed the old rails and took the number to order on the first day. The order came on the 3rd day. Can you imagine such fast service. My daughter is a single mom with 4 children, one of whom was responsible for the breakage. I am the grandmother and was very grateful for the fast service and great price. The drawer was installed in 10 minutes. I just screwed the old screw into the new part and replaced the drawer. Thanks
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bruce M - October 15, 2022
Verified Purchase
Easy Repair
The part came fast. But this is the second time in a year that I have ordered this part it keeps breaking doesn't seem to be made well.
★★★★★
★★★★★
Kyle P - September 3, 2022
Verified Purchase
Drawer support rail
Perfect fit and quick easy install.
★★★★★
★★★★★
Tim R - July 28, 2022
Verified Purchase
Worked as expected!
Was the exact part I needed to repair my fridge drawer. Only downside is the cost. Very expensive for a small plastic part.
★★★★★
★★★★★
Lynn K - July 23, 2022
Verified Purchase
Shelf rail
Fit perfectly and easy to install with help of YouTube videos.
★★★★★
★★★★★
Robert H - February 24, 2022
Verified Purchase
easy and fast
perfect fit
★★★★★
★★★★★
Darren B - February 3, 2022
Verified Purchase
Meat tray down!!!
Was exactly the part I needed with the direction I needed to make it happen. Thanks for letting me sort my meat and cheese out. All the way in Labrador but the part came in a timely fashion.
★★★★★
★★★★★
John M - November 25, 2021
Verified Purchase
Easy Peasy installation!
It took a while longer to arrive than I expected, tho’ that’s a sign of the times!arrived in good shape and was a simple installation. Although for what it was, I found it to be WAY overpriced.
★★★★★
★★★★★
David S - October 28, 2021
Verified Purchase
fast, easy repair
Got the part quickly, one screw removal of broken part, new part installed and back in business!!
★★★★★
★★★★★
Tina V - September 4, 2021
Verified Purchase
drawer support rails
The parts were received in excellent condition ahead of promised delivery time! Easy to install and repair especially with YouTube video instructions provided.
★★★★★
★★★★★
Harold P - September 1, 2021
Verified Purchase
part worked well
Part was shipped very quickly and fitted well and worked as it should
Go to U.S. site
Stay on this site
In Stock
