Part Location Diagram of 240356501 Frigidaire Meat Drawer Rail - Right Side
See part 42 in the diagram
Replacing your Frigidaire Refrigerator Meat Drawer Rail - Right Side
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Meat Drawer Rail - Right Side

★★★★★
★★★★★
16 Reviews
$65.00
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS430126
Manufacturer Part Number 240356501
Manufactured by Frigidaire
Product Description

Meat Drawer Rail - Right Side Specifications

As you look into the fridge, this drawer support track is located on the right hand side.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Refrigerator Meat Drawer Rail - Right Side

Replacing your Frigidaire Refrigerator Meat Drawer Rail - Right Side
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Westinghouse.
Part# 240356501 replaces these:
AP2116038, 891216, 240356501
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
16 Reviews
4.4
Filter By Rating:
  • 5 Stars
    13
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    2
  • 1 Star
    1
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.8 / 5.0, 54 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Water actuator broke
If you think you probably can't do this, you're like me... but you just had to try because you needed the part anyway right? This really was quite simple, a lot easier than it sounds from the description and saved me probably $75 I'd have had to pay a tech to do it. Just unplug fridge, yank that water spill tray out, yes yank, it's a bit hard to do that if you've not done it before. After that remove the 3 phillips head screws you just gained access to. Lift panel frame up then out. Disconnect wire harness plug and set that frame aside. Take out next screws exposed to free the unit. Tilt unit out and remove the two little screws and shims holding actuator in place. Remove broken one. Put new one in. Reverse all actions taken thus far. Plug fridge back in and have a drink of water like nothing ever happened. : ) You can do this!
Other Parts Used:
Water Dispenser Actuator
  • Jonathan from Universal City, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
133 of 145 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Support rails holding meat tray drawer broke.
I removed the drawer from the support rails and placed it aside. I then removed the entire shelf that the rails were attached to. Each rail contained one (1) screw. I removed the screw, slid the support rails back approximately a 1/4 inch and they popped out. I replaced with the new rails, sliding them into place in reverse of how I removed the damaged ones & attached with the screw. I cleaned the shelf off and placed it back in the refrigerator, and placed the meat drawer onto the new rails. It actually took longer to clean the shelf than perform the repair.
Other Parts Used:
Meat Drawer Rail - Left Side
  • Kathleen from Golden, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
57 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Meat Drawer and Support Rails Broken
I pulled the shelf unit out and removed the screw that held in each side. The old rails removed easily and the new ones installed just as easily. I put the shelf back in and slid the new meat drawer in and it was done - much to the delight of my wife. Parts Select has a great website. It was my first time and I read one of these with the exact problem I was having. I ordered the parts, which came quickly. Everything easy and worked great! I'm a happy customer.
Other Parts Used:
Meat Pan Rail - Left Side - White Meat Pan
  • Mark from Colorado Springs, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
33 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic guide rail broke
A plastic guide rail broke after the meat keeper drawer was left open and the refrigerator door was shut on the drawer, this has happened a few times over the last 6 years. We chose to change out both rails at the same time. We removed the meatkeeper drawer, then the shelf above as the rails are attached to the shelf. We removed the rails (one screw on each side. When the new rails came in, we replaced them with the screws. Super easy!
Other Parts Used:
Meat Pan Rail - Left Side - White
  • Doreen from Ormond Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Too of the rail supports inside the fridge were broken
First I removed two screws per rail and removed the old rails. I replaced with the new rails and used a nutdriver to secure in place. This was extremely easy and I fell like my fridge is brand new again.
You can do it!!!
Other Parts Used:
Basket Hanger - Left Side
  • Kristen from Payson, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
13 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Support rail broke
I recieved the part within 48 hours. I snapped the part in place and I was done in seconds.
Other Parts Used:
  • Karl from Bellaire, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The meat keeper drawer kept falling
Backed one screw off each side of the shelf brackets, snapped old ones out, snapped new ones in and replaced the screw. Spend more time taking food off the shelf than it did to make the repair
Other Parts Used:
Meat Drawer Rail - Left Side
  • David from Mogadore, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My son pulled on the meat pan & cracked the right support.
The old support just unscrewed & then the new one screwed right on with two screws.
Other Parts Used:
  • Tina from Baroda, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
support rail had broken lower slide
Could have done it with my eyes closed! Removed shelf and drawer, then removed broken support rail. Removed screw from broken rail and put the new, two piece rail together using that screw. Snapped rail back onto wall...returned shelf to fridge...returned drawer to fridge...returned myself to sanity! Yee Haw Easier than installing it was ORDERING IT. I was amazed by the ease of that process. Your ordering site is incredibly easy. By the way...I am a blonde and for blondes everywhere...Look at what I could do :)
Other Parts Used:
  • Betty from Hot Springs, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Actuator broken
The first thing I did was unplug the refrigerator for safety's sake. Then I made a mistake. I peeled off the module cover label. All I needed to do was pry the drip tray off to reveal the screw that holds the Module Cover in place. I used my fingernails to get under the botton edge of the tray then lifted it gently off. Then I unscrewed the Module Cover pulled it away from the freezer door and unplugged the electrical connection so I could set the Module Cover out of the way. I removed the broken piece of the original Acutator by unscrewing two tiny bolts from two tiny plates. That's where the tweezers came in. As soon as I took those little bolts out, the plates fell into a place where I could barely see them, let alone get into with my fingers. Once all the tiny pieces had been retrieved and put somewhere safe, I inserted the new Actuator up through the opening. The Actuator has an arm that sticks up and pushes against a spring to open the water flow. You'll want to make sure that arm is in front of the spring. The tricky task of screwing those two tiny plates back in took a while and a little swearing, since they now had pressure against them from the spring, but I was able to get it done with the help of a magnetized screwdriver. Then it was just a matter of plugging the electric cord back into the Module Cover and screwing the cover back into place, replacing the drip tray and sticking the label back on. The repair wasn't difficult it was just an extremely small space in which to work. The Drawer Support Rail and Refrigerator Door Shelf Bin popped in in about 30 seconds.
Other Parts Used:
Water Dispenser Actuator Refrigerator Door Bin
  • Christy from Bountiful, UT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ryan
October 22, 2019
Hello, my part number says 240356500. It is on a Frigidaire PLHS269ZDBN. Will this fit?
For model number PLHS269ZDBN
PartSelect logo
Hi Ryan, Thank you for your question. The part number listed under your model number for the right side meat rail is 240356501. I hope this helps. Thank you and have a great day!

11 people found this helpful.

Was this helpful?
Thank you for voting!
Naman
September 11, 2019
What size is it
For model number 240356501
PartSelect logo
Hello Naman, thank you for your question. This part is 15.5 inches long and abot 1 inch wide. I hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Liz
February 23, 2022
I need the left side rail for the meat draw but don't find is listed, only right side listed
For model number 25351692103
PartSelect logo
Hello Liz, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS429945. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Donna
February 1, 2023
Long clip that holds up the uppermost drawer (meat drawer?) do you have any? Thank you! Donna
For model number 25354663405, SERIAL NO LA51702766
PartSelect logo
Hi Donna, thank you for your question. The part you looking for is the meat drawer rail, part number PS430126. Please reach out to customer service if you need help placing an order. Glad to be of help!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS430126
Manufacturer Part Number: 240356501
Brand
Model Number
Description
Kenmore
25351232101
Refrigerator
Kenmore
25351232102
Refrigerator
Kenmore
25351232103
Refrigerator
Kenmore
25351232104
Refrigerator
Kenmore
25351232105
Refrigerator
Kenmore
25351232106
Refrigerator
Kenmore
25351234101
Refrigerator
Kenmore
25351234102
Refrigerator
Kenmore
25351234103
Refrigerator
Kenmore
25351234104
Refrigerator
Kenmore
25351234105
Refrigerator
Kenmore
25351234106
Refrigerator
Kenmore
25351392101
Refrigerator
Kenmore
25351392102
Refrigerator
Kenmore
25351392103
Refrigerator
Kenmore
25351392104
Refrigerator
Kenmore
25351392106
Refrigerator
Kenmore
25351394101
Refrigerator
Kenmore
25351394102
Refrigerator
Kenmore
25351394103
Refrigerator
Kenmore
25351394104
Refrigerator
Kenmore
25351394105
Refrigerator
Kenmore
25351394106
Refrigerator
Kenmore
25351399101
Refrigerator
Kenmore
25351399102
Refrigerator
Kenmore
25351399103
Refrigerator
Kenmore
25351399104
Refrigerator
Kenmore
25351399105
Refrigerator
Kenmore
25351399106
Refrigerator
Kenmore
25351622100
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service