This OEM white door bin is made of white plastic and is easy to install. It is used to hold items in the fridge, and you'll be able to visually see if the part is broken. This part attaches to the fridge door. You can check if this model is right for your appliance by checking your user manual and model number. The size of this door bin is approximately 15.42 inches wide x 7.1 inches deep x 5.04 inches in height and holds 1 gallon. No tools will be required to complete this repair, which our customers rated as very easy, and only takes a minute. Just pop the old part out of place and snap the new one in. This part is sold individually.
Slip the old one off and replace the new one with just snapping it in place!
Other Parts Used:
GEORGE from GARDEN GROVE, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
449 of 530 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
had broken sheves on the doors and the crisper drawers weren't suported
The only difficult aspect of the job was getting the old shelf support stud removed from the refrigerator wall - the support was broken off too short to allow vise grips to hold it. I had to use two screwdrivers to get under and then pop out the stud to the point I could get the pliers to hold. Everything eles pretty much just "fell together" very easily.
Refrigerator door bins cracked and glass shelf broke
Remove cracked bins, inserted new bins and replaced broken glass shelf. less than 10 minutes....parts came in 3 days.....website showed actual part pics which helped choose the correct replacement.......it was great!!
Installed 3 new door shelves, took less in then 10 minutes. Yes, all 3 broke at once. The original shelves were cheap. The new ones from Parts Select feel a lot more durable.
Replaced with new parts... they just pop right in. Cheap plastic used by manufacturer gets brittle with exposure to low temperatures and over a mere 5 years all break off. Very annoying.
Replacing broken refrigerator and freezer shelves.
I simply slid both of the shelves onto the hinges on both doors. Perfect fit. Couldn't be happier with purchase. Site offers diagrams of appliance so it is easy to find needed replacement parts.
Replacement of bins were simple the crisper cover supports were a little more time consuming since the manufactured piece were glued in. I used a tool that has a 30% tip and hooked the support and pulled in out part of the way and pulled the rest out with my fingers. All in all a simple job...I took the opportunity to do an addition cleaning of the inside of fridge with my extra time. Would also like to say that my parts were delivered within 24 hours of ordering them and the website made purchasing easy and no second guessing, since the model had an exploded version of all the parts available. Thank you
Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Emily
July 20, 2017
How big is this bin?
Hello Emily, thanks for your question. This refrigerator door bin is 15.42 inches wide, 7.1 inches deep, and 5.04 inches high. Please let us know if you have any further questions.
21 people found this helpful.
Was this helpful?
Thank you for voting!
Norah
July 20, 2017
My door bin is cracked and I’m not sure if I can repair it or if I have to buy a new one?
Hi Nora, thanks for your question. We recommend replacing any door bin that is damaged. Even though the crack may seem small it can lead to bigger problems. These bins are designed to hold larger items, so a crack might mean that they are more likely to break. I hope this helps, if you have any further questions please let us know.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Jo
August 14, 2017
The bottom 2 door shelves have cracked. Would the dairy door bins (ps429785) fit? I would rather have these ones for all 4 door shelves, than the ps429724 door bin because i would be able to fit more & take off to take to table for serving.
For model number FRS26R4CQ0
Hi Jo,
Thank you for your inquiry. They may interfere with the bottom crisper drawers inside of your fridge, however you could test that with the bins that you already have. Take one of your upper bins and place it in the bottom section. Close the door slowly and see if they are shallow enough to fit in that area. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Melany
July 20, 2017
MY fridge is Kenmore but this is Frigidaire part just wanted to make sure this will actually fit my fridge
Hello Melany, great question! Door bin 240356401 will fit on the fresh food door in your refrigerator. Frigidaire manufactured this appliance for Kenmore. I hope this helps.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Kent
April 21, 2018
I need door bins for this model
For model number 253.57384601
Hello Kent, Thank you for your inquiry. We are showing part# 240356401 as the 1 gallon door bins at the top of the right side door, part# 240323001 as the bins that snap into place at the bottom of the right side door, part# 240334201 as the upper bin for the freezer/left hand door, and part# 240351601 for the three lower door bins. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Helen
August 8, 2018
Top door bin is cracked, none of the ones i see look the same. Which one will work? Thanks
For model number ffhs2611lq0
Hello Helen, thank you for your question. The top door bin on the fridge door is part number Door Bin
Part Number: PS430121. The top door bin on the freezer door is part number Freezer Upper Door Bin
Part Number: PS429846. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rhoda
December 8, 2017
I need an additional door bin. The ones i have measure 15 inches wide, and the inside where they attach is only 14 inches wide. Will this bin fit?
For model number FRS26H5ASB4
Hi Rhoda,
Thank you for your question. The bin you have referenced in your question to us is listed under your model number and will work on your refrigerator. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Shanette
February 15, 2018
I am looking to replace the door bins on my frigidare. Will this bin work for my refrigerator
For model number FSC23LR5JM2
Hi Shanette,
Thank you for your question. No, this part is not listed under your model number. There are 3 bins listed under your model number. The part numbers listed under your model number for the door bins are PS976747, PS976751 and PS976770. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Staci
August 20, 2019
Is each part for the refrigerator door sold separately?
For model number FFHS2622MS3
Hello Staci , Thank you for the question. Yes each part that has a number pointing to it on the diagram are sold separate from the door. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Warren
January 10, 2019
One of the top 2 door bins is broken, the part # on the bin is 2403564. Will this replacement work?
For model number FGUS2642LF2
Hello Warren, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS430122. Thank you for your inquiry, good luck with this repair!
This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they attach to the refrigerator door by the back of the shelf. This part is sold individually.
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide. It can be used in t...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS430121
Manufacturer Part Number: 240356401
