See part 4 in the diagram
( Grid squares measure 1x1 inch )
Refrigerator Door Shelf Retainer Bar - Cut to Fit
$36.71
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS429820
Manufacturer Part Number 240331401
Manufactured by
Frigidaire
Product Description
Refrigerator Door Shelf Retainer Bar - Cut to Fit Specifications
This retainer bar is cut to fit your refrigerator and existing end caps.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Westinghouse, Gibson.
Part# 240331401 replaces these:
AP2115820, 891017, 240331401, 240331402, 240331403, 240331404, 240331405, 240331408, 240331410, 240331415, 240331416
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Deborah
January 4, 2019
Will this fit refrigerator and freezer?
For model number FRT18TPH
Hello Deborah, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS422630. The Part Number: PS422630 fits both the freezer and fridge door. Hope this helps, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
BEN
February 28, 2019
The refrigerator door shelf retainer bar is a different length then the one in the freezer they a not both the same length. I read in the q&a that you guys were telling people that they are the same and they simply are not. So i was wondering if you have the freezer one.
For model number 25371822104
Hello Ben, Thank you for contacting us. I believe this is in regards to one of the cut to fit bars. Based on the diagram I show the freezer bar as figure 8 which is part number PS429820. Pleas note the end caps are sold separately. Have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Connie
June 18, 2019
Does the refrigerator door bar part # ps429820 fit the end caps part #s ps429667 and ps429668. I am looking to replace 2 shelf bars/end caps in our Electrolux refrigerator model # frt17b3aw2 thanks
For model number FRT17B3AW2
Hello Connie, thank you for writing. There are different End Caps depending on what location the Bar is going on. Is the Bar you are replacing going on the freezer or fresh food door? If it is the fresh food door, is it the middle one or either the top or bottom? The middle fresh food door Bar uses part PS429833 and PS429834. The rest of the Bars on the refrigerator use parts PS429668 and PS429667. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cecilia
January 15, 2018
Does this part works for the freezer door?
For model number FRT18KC3BW2
Hello Cecilia, Thank you for your inquiry. Yes, this part is for the freezer door as well. Hope this helps!
Was this helpful?
Thank you for voting!
Molly
June 12, 2019
What is the length of this bar in inches?
For model number 1069730681
Hello Molly, Thank you for the question. This Refrigerator Door Shelf Retainer Bar is 20.25" and must be cut to fit your refrigerator. Hope this helps!
Was this helpful?
Thank you for voting!
Part Videos
Replacing your Frigidaire Refrigerator Refrigerator Door Shelf Retainer Bar - Cut to Fit
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 36 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
tenants had broken door brackets in fridge
cut brackets to size and snapped them into place with the caps purchased. I will continue to use PartSelect for all my appliance repair needs. Not only did I receive my order within 2 days but the cost was over half of what I have been paying for the local parts store to order for me. Thank you PartsSelect.
930 of 934 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Retainer bar had broken from overloading the door with water bottles.
It took longer to remove the retainer bar from the packaging than it did to install it in the fridge.
Both left and right end caps were pushed into their respective places on the retainer bar and then the whole thing was snapped into place on the door of the fridge.
Super easy!
Both left and right end caps were pushed into their respective places on the retainer bar and then the whole thing was snapped into place on the door of the fridge.
Super easy!
732 of 739 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelf-retainer bar and brackets
Put them together and (do this carefully, as they are light-duty plastic; the reason the originals failed) snapped them into place. Parts were factory-origninal, easy to figure out. Delivery time was exceptional, packaging great.
463 of 464 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken shelving in Frigidaire Gallery side by side refrigerator and broken shelving in White Westinghouse/Frigidaire refrigerator
I snapped off the old, broken parts of the shelves and in the side by side fridge, I just popped on the new shelf. In the White Westinghouse freezer on top fridge, I had to remove (it snapped right off) the broken side shelf retainer bar end cap from the fridge and remove the broken piece piece of plastic from existing shelf retainer bar end cap that was stuck in the retainer bar. I used a letter opener to help get it out. Then I snapped the new door shelf retainer bar end cap into the bar, and snapped the bar end cap back to the door. Both repairs took less than 5 minutes..........and I am a female who isn't very handy!!
132 of 244 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken shelf
snap in place
43 of 58 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker water would constantly drip. Forming a huge block of Ice.
Pulled refrig away from wall, shut off water supply. Removed two screws holding the old water value on the back of the refrig. Removed the two water lines from the value. Hooked water lines up to the new value and bolted the two screws and the new value on. Turned on water and pushed refrig back into position. Simple and it worked. No more huge blocks of ice. I have Cubes!!!
35 of 51 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shelf holders were broken along with end caps
The repairs were easy. The braces and end caps went together fairly easy. The freezer brace needed to be cut to fit but was easily done. 15-30 minutes was all that was needed.
16 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken or missing retainer bars I butter dish
Took the old ones off and installed the new ones. Simple repair
14 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator door missing parts
I ordered two of the long refrigerator shelf door bars and cut one of them to fit the freezer shelf door because that ready-made door bar was very expensive. The fit after cutting and notching to receive the end caps went very well.
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator Came With House - Had missing parts
The refrigerator that came with the purchase of my house had a missing retainer bar in bottom shelf of fridge and a duct-taped retainer bar in freezer. When parts came, all I had to do after removing the duct-tape, was slide up the broken end cap to pop it off then, snap the retainer bars into the end caps and slide them down into place. No tools necessary. Should have done this two years ago when I bought the house!
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Joann S - January 17, 2019
Broke during installation
The part came quickly. The metal bar was too long and had to be cut carefully before it could be used. It also had to have the little holes for installing put back into the metal.When carefully installing the right hand holder's plastic tip for locking the shelf in place broke off.The shelf is taped waiting for a new right side mount. The video was useful and helpful but even with great care the plastic right side tab broke off. The pictures on the website are very helpful in selecting the right parts.
James R - September 20, 2018
Easy repair, great part. Reliable service.
I was happy with the quality and service.
KAREN W - July 21, 2018
Perfect fit
This part came quickly and was exactly what we needed.
Related Parts
$10.59
Door Shelf Retainer Bar End Cap - Left Side
$10.59
PartSelect Number: PS429667
This end cap can be used for the left side of either the freezer door or the fresh food door. 
$10.59
Door Shelf Retainer Bar End Cap - Right Side
$10.59
PartSelect Number: PS429668
This bar end cap is sold individually.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS429820
Manufacturer Part Number: 240331401
Manufacturer Part Number: 240331401
Brand
Model Number
Description