Upper Hinge Bearing

Removed the trim screw on top of the door then removed the two hinge bracket bolts. lifted the door
off placed on the table. Remove the two screws on
holding the bearing bracket on the bottom of the door.
removed the bearing and replace with the new one.
Reinstalled in reverse order.

-Analyzed the symptoms, consulted your website
-Found where a clicking sound could be symptomatic of the problem
-Consulted the diagrams of the refrigerator for possible parts
-Ordered the parts listed as probable problem causes
-Received parts in a few days
-Removed door as your website recommended
-Installed upper door bearing as a preventative action as it was OK.
-Installed the lower hinge bearing and door closing cam.
-Lubricated both upper and lower bearings w/ silicone grease.
-Reinstalled fridge door & tested the door closing action
-Worked like a champ and only took about 1/2 hour! Thanks!