Frigidaire/Frigidaire_Thumb/6SLAUZTK.gif
See part 8 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Terminal Block Kit

$47.62   Special Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS419369
Manufacturer Part Number 134101400
Manufactured by Frigidaire
Product Description

Terminal Block Kit Specifications

This kit includes 3 screws and 3 terminals.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | No heat or not enough heat
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Westinghouse.
Part# 134101400 replaces these:
AP2108156, 916788, 08027445, 3281025, 5303937016, 8027445, Q000633751, WQ633751
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    John
    August 25, 2017
    My dryer will not start. I have replaced the starter switch and the switch button in the door. I also purchased a thermal block kit partselect number ps419369 Manufacturer part number 134101400 Manufactured by Frigidaire does this kit work for a gas dryer? If so, where is it located?
    For model number FGRB7800DS0
    Hi John, Thank you for the question. The PS419369 is the correct block for this Gas appliance. The block on this appliance looks to be on the back of the appliance in the top corner. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Carter
    December 24, 2017
    My dryer will start for about 10 seconds and then turns off. It does spin and it is very loud. Sometimes it doesn't start when clicking the start button and i have to turn the knob multiple times in order to get it to turn on again. Do these sound like symptoms that could be solved with this part? Thanks!
    For model number FEX831FS2
    Hi Carter, Thank you for your question. If your dryer is not tumbling, there are some parts that you will need to check to see which one is causing the issue. You will need to check the belts, the idler pulley and the motor. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Melissa
    March 14, 2018
    My dryer will run for about 2 minutes then it starts to make a really loud noise and gets extremely hot. I have made sure that there is good airflow and the dryers completely clean
    For model number fre5711kw
    Hi Melissa, Thank you for your question. If your dryer is getting too hot, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the thermal limiter, the high limit thermostat, the heating element assembly, the thermostat - 4 terminal - L135-15F and the drum belt. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.4 / 5.0, 4 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Terminal Block Melts when power cord connector is left loose by install crew.
        1) Removed Top Dryer Cover (pushed 2 compression clips on front side 1" from top and 2" in from each side) to gain access to terminal block in rear.
        2) Removed 2 screws over terminal block cover and 2 screws holding bad terminal block in place. Removed 3 screws holding bad power cord,
        3) Removed good terminal connectors from bad terminal block and reinstalled them in the new terminal block.
        4) Cut dryer wire from bad terminal block connector and soldered (optional) them to the new terminal block connector. Installed this connector into the new terminal block.
        5) Installed new terminal block in dryer with 2 screws.
        6) Installed new power cord on new terminal block ensuring contacts were tight and cord had pull guard properly installed. Reinstalled terminal block cover with 2 screws.
        7) Reinstalled Dryer Top Cover.
        • Arthur from Grand Prairie, TX
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Pliers, Screw drivers, Socket set
        • Parts Used:
          134101400
        44 of 61 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Burning odor, melted terminal block
        0) Turned off breaker at panel and disconnected power cord from 240v wall outlet
        1) Removed screws that hold electrical cover plate on back of dryer.
        2) Lifted the top of dryer using putty knife on 2 top edges of lid. This lifts up like a cars hood.
        3) Removed the screws that attach the power cord to the terminal block and disconnected power cord
        4) Removed screws that attach terminal block to dryer
        5) Removed melted terminals by prying out of terminal block. Note metal lip on terminal has to be lifted in order to slide connector out. Also unscrewed ground wire from terminal block to dryer.
        6) Drew diagram of what color wires go to what terminals
        7) Cut terminals off of wires and connected new terminals. Crimped closed and used butane solder torch to solder connection between terminal and wire
        8) Reconnected terminals to terminal block by sliding in. **Note, had to file down the edges of the terminals using moto-tool to make it fit as they are connected together using break-away tabs that leave a large piece of metal connected not allowing to fit in terminal block
        9) Reconnected terminal block to dryer and reconnected ground wire.
        10) Reconnected power cord to terminal block with screws
        11) Replaced cover over wiring terminal block
        12) Reconnected power cored to 240ac wall outlet
        13) Turned breaker back on
        • DAVID from DURHAM, NC
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          134101400
        11 of 11 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Missing power cable cover/damaged terminal block
        While changing power cable from 3 prong to 4 prong connection on a recently purchased used dryer I found the terminal block partially melted due to improper connectors which overheated. The bracket and cover were also missing which presented a shock hazard for anyone touching the exposed connections and there was no way to connect the strain relief. I disconnected the old 3 prong cable, removed the old terminal block, installed the new terminal block (required opening the dryer top for access), threaded power cable through bracket and fastened with strain relief leaving loose, attached the neutral/ground wires to middle terminal connection point, red to red wire in terminal block and black to black wire also in terminal block and tightened bracket and added cover.
        • Glenn from Universal City, TX
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers
        8 of 13 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Terminal block, and wires were dammaged/melted
        Used nut driver to remove screw and cover from dryer cord terminal block, used screw driver to remove two screws securing old terminal block, cut dammaged wire and stripped wire back and crimped on new terminal connecter, replaced old terminal block with new one, replaced two screws, installed new cord, and replaced cover plate and screw.
        • Edwin from Eagar, AZ
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Pliers, Screw drivers
        • Parts Used:
          134101400
        6 of 8 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS419369
          Manufacturer Part Number: 134101400
          Brand
          Model Number
          Description
          Frigidaire
          41749022890
          Dryer - Residential, Electric
          Kenmore
          41761712510
          Washer Dryer Combo - LAUNDRY CENTER
          Kenmore
          41761722510
          Washer Dryer Combo - LAUNDRY CENTER
          Kenmore
          41761722511
          Washer Dryer Combo - Laundry Center
          Kenmore
          41761723510
          Washer Dryer Combo - LAUNDRY CENTER
          Kenmore
          41761723511
          Washer Dryer Combo - Laundry Center
          Kenmore
          41764182300
          Dryer
          Kenmore
          41769042990
          Dryer
          Kenmore
          41769042991
          Dryer
          Kenmore
          41769052990
          Dryer
          Kenmore
          41769052991
          Dryer
          Kenmore
          41780032990
          Dryer
          Kenmore
          41780042990
          Dryer
          Kenmore
          41780042991
          Dryer
          Kenmore
          4178005291
          Dryer - Kenmore Dryer Model 417.8005291 (4178005291, 417 8005291) Parts
          Kenmore
          41780052990
          Dryer
          Kenmore
          41780052991
          Dryer
          Kenmore
          41780142000
          Dryer
          Kenmore
          41780412700
          Dryer
          Kenmore
          41781042000
          Dryer
          Kenmore
          41781042001
          Dryer
          Kenmore
          41781052000
          Dryer
          Kenmore
          41781052001
          Dryer
          Kenmore
          41781142000
          Dryer
          Kenmore
          41781142001
          Dryer
          Kenmore
          41782042100
          Dryer
          Kenmore
          41782042101
          Dryer
          Kenmore
          41782042102
          Dryer
          Kenmore
          41782052100
          Dryer
          Kenmore
          41782052101
          Dryer

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service