This cycling thermostat monitors and regulates temperature by turning heating components on and off as needed. Designed for accuracy, it helps maintain consistent operating temperatures and efficient performance.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Too hot
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Crosley.
Part# 134048800 replaces these:
AP3210790, 916701, 131637700, 134048800
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer was getting very hot
I watched videos so I would know what I was doing. Well No, My thermostat was in the front of the dryer. But after a little blood and sweat, and I am not kidding, I got the front off. I ordered my new part. Finally got it in Spent $40.00 and it still doesn't work. I know it was the right part. I checked all the trouble shooting web site. That was the only thing they said it would be. Friends advice tell me it is the brains of the thing and I need a new one. Well not 2 weeks before Christmas. Thanks for asking. Single hard working mom.
Other Parts Used:
marjorie from Cary, NC
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Wrench set
9 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My wife said the dryer started burning and stopped heating.
While my wife was using the dryer, she noticed a loud sound and sparks coming from the bottom of the dryer (and an elctrical smell). The dryer stopped heating. When I started taking off the top and front of the dryer, I noticed what looked like a thermostat had melted and burned. I called a local part store and they said they would have to order it and it would take two weeks. But the guy was kind enough to give me the part number and told me to call anothe store. Instead I went online, found this site and the next day I had the part. It took me less than an hour to install it and reassemble the dryer. Me and my wife were very pleased.
Other Parts Used:
dino from gonzales, LA
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
8 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
March 4, 2019
The dryer doesn't start, i have the thermal fuse out. How do i test it? Should both legs have continuity?
For model number FSE447GHS0
Hello David, You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. Yes both legs or prongs should have continuity. Hope this helps!
4 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Ann
October 11, 2019
Do i need the front panel off to get access for replacing this part?
Hi Ann, thank you for your question. We do not have a video for your model specifically however we do have lots of installation videos that you can view on our YouTube channel here: https://www.youtube.com/user/partselect/search?query=dryer+thermostat. There are a few that go over how to install this part from the front. I hope that helps. Good luck with your repair.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Megan
February 9, 2025
The dryer runs but has stopped heating up completely just basically air drying. Not sure if its the heating element or what but couldn't find the part on here to replace it.
For model number FRE5711KW0
Hello Megan, Thank you for contacting us. Researching your model, we would recommend checking the thermal fuse/limiter, the high limit thermostat, the cycling thermostat and the heating element. You can test the parts with a multimeter. Good luck with your repair.
Have a Frigidaire gallery heavy duty dryer and the top of the back panel and the rear of the top panel get very hot to the touch. Dryer is about 16 years old and it still dries clothes well. We get an occasional burn mark on clothes. Still runs fairly quiet. Is this a sign of something going bad that should be replaced.
For model number FSE447GHS0
Hi Todd,
Thank you for your question. If your dryer is getting too hot, there are some parts that you will need to check to see which one is causing the issue. You will need to check the thermal limiter, the high limit thermostat, the heating element assembly and the cycling thermostat. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out.
This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops by 70 degrees Fahren...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
