Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Yvonne B - October 29, 2023
Verified Purchase
Easy repair simple
The part came in a few days that part was fabulous. It is definitely a flawed design with the middle part of the knob being made out of cheap plastic that broke. The other disappointment was the price $112 for a very important part for the dryer to work properly. Very expensive.
★★★★★
★★★★★
David H - December 21, 2022
Verified Purchase
First class service
Excellent customer service person and most helpful and knowledgeable.
★★★★★
★★★★★
Jack P - September 21, 2022
Verified Purchase
Easy repair.
Great service. Part was the right one first time. Easy to install.
★★★★★
★★★★★
Lorna A - March 10, 2022
Verified Purchase
Worked as expected
It’s an exact knob that we needed
★★★★★
★★★★★
Patricia R - September 23, 2021
Verified Purchase
Dryer Knob Fit
I ordered the know, very easy to find on your site. It arrived within days and fits perfectly!! I love your site , very easy to find and order what I need. This is the second time I have used your site.
★★★★★
★★★★★
Lesley W - September 11, 2021
Verified Purchase
Easy repair
My dryer works again!
★★★★★
★★★★★
Richard T - August 30, 2021
Verified Purchase
Easy to order and install
The part was factory perfect. It arrived in a timely fashion.
★★★★★
★★★★★
Sara B - August 11, 2021
Verified Purchase
It fits
Thank you so much. I am so happy that you were able to find a part that would fit my dryer timer
★★★★★
★★★★★
Bob A - May 25, 2021
Verified Purchase
Perfect fit
This was exactly the part needed. Arrived a early and to the right address. Very pleased.
★★★★★
★★★★★
Lynn B - January 13, 2021
Verified Purchase
Dryer Timer Knob
Part worked well. Dryer back in working condition.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 45 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Hub inside knob cracked
What the pictures do not show is the inner clamp spring that grips the selector switch shaft so it will not easily fall off. It is not shown or mentioned but in fact was installed in the knob.
Other Parts Used:
Robert from McMinnville, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
59 of 64 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two knobs cracked and I had to use pliers to turn on my dryer.
All I did was take the new knobs and put them on and my dryer was like new. The knobs were an exact fit. It took 3 minutes.
I went to the website. There were visual aids to help describe the part. I picked it based on the pictures and the description. Ordering was easy and the part arrived in the time promised. I popped it on and it worked perfectly. I saved about $85 because I didn't need a repairman.
Great job!
Other Parts Used:
Diana from Beaverton, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob would not turn.
Remove broken knob. Saw that the boss on the backside of the knob that mates with the timer shaft was cracked. Install (press fit) new knob.
Other Parts Used:
Albert from Howell, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old timer knob was cracked
Ordered the new knob and stuck it on. Doesn't get easier than that!
Other Parts Used:
Deborah from East Hampton, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Knob
Simply put on the new knob. It took 2 seconds. Easy!!! So glad I didn't have to spend a small fortune for a repair. Thank you!
Other Parts Used:
Kiki from Eureka, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was not heating in some modes and timer was "sticky"
I unplugged the dryer and then removed the top sheet metal cover with a nutdriver. I removed old timer with a phillips #2 screwdriver. I drew a diagram showing which color wires were connected to each point on the old timer. I unplugged the wires (a needle nose plier was needed for some of the tighter connectors) from the old timer and then connected the new timer. The whole repair would have been less than 30 minutes, but I dropped a screw into the open dryer. I had to remove the front sheet metal to retrieve the screw. This was the only annoying part and probably doubled the repair time, but even this was not too hard. I hate this dryer and will never buy another Fridigaire appliance, but I am happy with the quick service of PartSelect.com. It was faster and a lot cheaper for me to buy the part and do it myself instead of scheduling a repair.
It was very easy, looked and found the right match and pulled off the broken one and pushed on the new one
Other Parts Used:
Lawrence from Milwaukee, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced broken timer knob
Just pressed the knob on.
Other Parts Used:
Corey from Lodi, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob was cracked
Just put on the new knob! Supper easy and it works great!
Other Parts Used:
Natalie from Logan, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Spring
November 28, 2017
How do i know where to aim the knob so that the time settings are correct. Since we were using pliers after the job broke and now it isn't in the same position
For model number GLEQ332AS2
Hi Spring,
Thank you for your inquiry. There is a video listed with the part on our website that shows how to install the knob. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
December 28, 2019
I have a fridigaire gas dryer model fsgc849ghs0 that needs a replacement timer knob. When i search for this model on your web site i get a result for model number fsg849ghs1 indicating a timer knob part number of ps418921. This part appears to sub to part number 131873500. Given the price (about $50 i'd like to confirm this part will fit my older dryer before ordering). Is there any way to confirm part number 131873500 is going to fit before i order? Thanks.
For model number FSGC849GHS0
Hello Steve and thank you for writing.
Yes timer knob part number: PS418921 is in the list of compatible items for your model. We hope this helps. Please contact us anytime. Please make sure the shaft is D shaped.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joyce
December 10, 2018
I do not need the timer knob but the start dial and one next to it do you have these dials?
For model number GLEQ332AS2
Hi Joyce,
Thank you for your question. The part number listed under your model number for the knobs you are looking for is PS419266. They are sold separately. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Carlos
December 11, 2019
Looking for the start knob for the dryer and the actual metal piece that the knob attaches to. Knob broke, then used pliers to start, then the metal piece broke so cannot start dryer.
For model number FEQ332ES0
Hello Carlos, thank you for contacting us. You will need the Rotary Knob, part number PS419266, and the Turn-Type Start Switch, part number PS975832 for your model dryer. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
