Frigidaire/Frigidaire_Thumb/JRVWEJIJ.gif
See part 32 in the diagram
Replacing your Frigidaire Dryer Ball Hitch play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Ball Hitch

$77.30   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS418736
Manufacturer Part Number 131777700
Manufactured by Frigidaire
Product Description

Ball Hitch Specifications

You can get this part in a kit also.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy | Will not tumble | Will Not Start
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Westinghouse.
Part# 131777700 replaces these:
AP2107609, 131378400, 137088600, 137088620, 137088630
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

3 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Ron
    February 3, 2020
    Can’t find the entire kit on your site. Dryer bearing assembly
    For model number FEX831CS0
    Hello Ron, Thank you for your question. The dryer bearing for your model is under part PS446536. We hope this helps.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Fred
    August 13, 2021
    Can’t find complete dryer bearing kit Ex. Ball hitch, support bracket ,lubricant,
    For model number Fex831fs2
    Hello Fred, Thank you for your inquiry. We have researched your model and found the complete dryer bearing kit to be part# PS459829. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Kevin
    October 6, 2021
    Want to replace the heating element on my dryer but don't know how to get that ball hitch flange off so I can remove the old coil and put on the new one.
    For model number FEX831CS0
    Hello Kevin, Thank you for the question. We suggest watching the How to Video for these parts. We hope this helps! https://www.youtube.com/watch?v=7d0wAFCmrRA
    play video

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Frigidaire Dryer Ball Hitch

      Replacing your Frigidaire Dryer Ball Hitch play video
      Customer Repair Stories
       Average Repair Rating: 2.7 / 5.0, 13 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      squeeking like crazy
      well, i started at the top and worked my way down. by taking the top off, it gave me more room to get the dryer tub out. took the two screw`s out of the vented plate on the back of the machine to undo the belt. this is a stackable washer-dryer combo, so next i took off the white plate on front between washer & dryer. took off the control panel, unpluged it, then took dryer door front off. then removed the two screw`s that hold that bracket on ,in the back of dryer, pulled the drum out & replaced the belt, but before replacing anything i took the shopvac to it , there was alot of lint in there.when replacing the Grounding Ball Clip & Grounding Ball, i took a one inch by two inch magnet and used it to hold the Grounding Ball & Clip in place so i could get the two screws started in the Drum Support Bearing & Bearing Bracket. after installing that i put the shaft in place & lined the dryer tub up with the 3 screw hole`s ,and boom, bang, pow...nothing to it. it`s easy...parts came very fast....Thx PartsSelect.com...i`ve told all my friend`s about PartsSelect
      122 of 139 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      retainer around drum dryer was wore, back bearing squeeks
      I look up on the internet on how to disassemble dryer to get to the parts needed. Took off top, found screws to take off front. Removed existing drum riding seal and lower seal. Used laquer thinner to remove excess glue. Cleaned throughly with soap and water. Reapplied new seals.

      At the same time removed drum and parts in the back of the dryer for ball bearing. great, expeditious help from your store. Thank you
      43 of 1285 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dryer squealed loudly
      First, I removed the top panel which is held on at the front by pressure clips. Second, I removed the entire front panel which entailed removing 2 screws and 2 wire couplings. Third, I removed the 3 screws on the inside center of the drum which turned out to be unnecessary. Fourth, I slid the drum forward in order to access the rear bearing. Lastly, I replaced the entire bearing assembly including the shaft, bracket, bearing, grounding ball and clip. Again, probably not needed but I had ordered the parts in advance in preparation for the worst.
      32 of 41 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      rear support bearing squeeking
      removed top and front of machine. removed drum. replaced shaft, bearing bracket, and support bearing from inside. replaced grrounding ball and clip from outside. reassemble.
      this should be available as a kit, and should include high temp grease to put in bearing bracket
      30 of 683 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dryer Drum Squealing Loudly!
      This unit is a stackable washer&dryer,so first pull unit away from wall atleast 4 foot. Unplug power cord,then take10 dagree front panel off then the control panel off and unplug the 5 connetors if your unit has that many,then lay panel asside. Take dryer door off,makes it easier when putting it all back together. Now take front panel off and the dryer lent tube,now just take the 3 center phillips head screws out and slide drum out. Pull upward on what they call the shaft which held drum on. Now these are the parts you should order. Belt,grounding ball clip,grounding ball,drum support bearing,bearing bracket,and most important part is the shaft. The shaft is ur insurance for the whole job. Use a good grease like white lithium grease and coat the shaft end and the drum support bearing. The grease will cut down on friction for a while,and re assemble the way you took apart. Reminder grounding ball goes behind drum support bearing not in front. Good luck and please vaccum.
      • john from waynesboro, VA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Pliers, Screw drivers, Socket set
      • Parts Used:
        131777700
      13 of 13 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Bearing Bracket Worn Out
      Took off front panel, removed drum and replaced parts listed. A bit tricky to keep small parts in place. However, masking tape helped. Best of all was the online diagram of how the parts were assembled. In addition, taking step by step phone pixs aided in replacing parts since there was some down time between diagnosis and installation.
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dryer bearing failure
      From previous responses on this site. I just followed their lead. If I had not found these folks, and the responses, it would have been a nightmare. It looked like and I thought the dryer came apart from the back! But in reality it comes apart from the front!! Absolutely fantastic site and help. Fast shipping, I ordered on Wednesday before Labor Day, didn't expect the parts until the following Wednesday, but received the parts on Saturday morning, and had the dryer back running by Sunday AM. Never even ran out of clean clothes!!!!!
      7 of 12 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      dryer squeeking while in use
      unplug dryer. lift the top of the dryer up and back. Take the screws out holding the front panel on. One on each side. Disconnect wires from door open stop switch and take front panel off. Remove drive belt from around pulleys and lift drum up and forward out the front of the dryer. I had to replace the plastic and metal holder and the grounding ball also. Remove the shaft from the drum and put he new one on. Put the drum back in, wrap the belt around the drum and set drum in plastic holder. Then just reverse your steps. Fairly easy.
      • Paul from Fort Edward, NY
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Screw drivers, Socket set
      • Parts Used:
        134503600, 131777700
      6 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Loud Squeaking c/c unlevel. Led to shaft breaking
      Took off all controls and panel. Removed the top. Pulled out the drum. Unscrewed shaft and bearing holder. Replaced all parts and started it back up.
      --The parts were shipped timely,
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      bearing bad and shaft broken
      replaced bearing and shaft new belt and everything works just fine
      • Randall from New Roads, LA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      • Parts Used:
        131825900, 131777700, 131724301
      2 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Related Parts
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS418736
      Manufacturer Part Number: 131777700
      Brand
      Model Number
      Description
      Frigidaire
      41749012890
      Dryer - Residential, Electric
      Frigidaire
      41749022890
      Dryer - Residential, Electric
      Kenmore
      41759012890
      Dryer - Kemore Dryer 41759012890
      Frigidaire
      41759022890
      Dryer - Gas
      Kenmore
      41761712510
      Washer Dryer Combo - LAUNDRY CENTER
      Kenmore
      41761722510
      Washer Dryer Combo - LAUNDRY CENTER
      Kenmore
      41761722511
      Washer Dryer Combo - Laundry Center
      Kenmore
      41761723510
      Washer Dryer Combo - LAUNDRY CENTER
      Kenmore
      41761723511
      Washer Dryer Combo - Laundry Center
      Kenmore
      41761732810
      Washer Dryer Combo - Laundry Center
      Kenmore
      41761732811
      Washer Dryer Combo - Laundry Center
      Kenmore
      41761733810
      Washer Dryer Combo - Laundry Center
      Kenmore
      41764182300
      Dryer
      Kenmore
      41769042990
      Dryer
      Kenmore
      41769042991
      Dryer
      Kenmore
      41769052990
      Dryer
      Kenmore
      41769052991
      Dryer
      Kenmore
      41771712510
      Washer Dryer Combo - LAUNDRY CENTER
      Kenmore
      41771712511
      Washer Dryer Combo - LAUNDRY CENTER
      Kenmore
      41771712512
      Washer Dryer Combo - Laundry Center
      Kenmore
      41771722510
      Washer Dryer Combo - LAUNDRY CENTER
      Kenmore
      41771722511
      Washer Dryer Combo - LAUNDRY CENTER
      Kenmore
      41771722512
      Washer Dryer Combo - Laundry Center
      Kenmore
      41771723510
      Washer Dryer Combo - LAUNDRY CENTER
      Kenmore
      41771723511
      Washer Dryer Combo - LAUNDRY CENTER
      Kenmore
      41771723512
      Washer Dryer Combo - Laundry Center
      Kenmore
      41771733810
      Washer Dryer Combo - Laundry Center
      Kenmore
      41771733811
      Washer Dryer Combo - Laundry Center
      Kenmore
      41774182300
      Dryer
      Kenmore
      41774182301
      Dryer

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service