Door Catch 131658800

Hello Sean, Thank you for the question. Yes the part is compatible. It is the same part, just as a kit with both the male and female parts. Hope this helps!

Hello Tim, thank you for your question. The part is sold individually, so you get one catch per order. The one specified for your model is PartSelect Number: PS418433. The other one (Ps475419) is not listed as being compatible with that unit. I hope this helps.

Hi Tim, Thank you for your question. We apologize that our prices are not as low as you expected. We base our prices on what we are charged by the manufacturer for the OEM parts. We try to keep our prices as low as possible, but do also have to keep them at a level to help cover our costs. We hope this helps to explain the reasoning behind the prices. I hope this helps. Thank you and have a great day!

Hi Irvin, thank you for your question. When you are experiencing an issue like this there are a few parts that you will have to test to determine what is causing your issue. For all of these parts you can test them with a multi meter. First you will have to test your thermostats and thermal fuses to make sure they are all functioning correctly. After that you will want to test parts in this order, your m series coils, igniter itself, or your radiant flame sensor. You may also want to check your regulator just to make sure that part is functioning properly as well. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. The door catch could be a problem but only if you see that the part is physically broken. You would want to check the door lock to make sure that it is locking correctly (this is the part that the door catch/strike goes into, to signal your appliance that the door is safely shut.) I hope that helps. Good luck with your repair.

Hello and thank you for writing. You might be able to, but you would have to almost crawl into the door to reach that part. For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair. https://www.youtube.com/watch?time_continue=1&v=gA0PLbLeYGE&feature=emb_title

Hello Jerry, thank you for writing. If the unit will go through all the cycles, but will not drain we would recommend checking the PartSelect Number: PS11703540 Lid switch, Drain Pump PartSelect Number: PS12365991, and Part Number: PS8746947 actuator. If these parts are tested/replaced and don't fix the issue the problem could be with one of the control boards. I hope this helps!

Hi Vero, Thank you for your question. Before we can assist you further in verifying if this is the correct part for your dryer, we would need the model number from your appliance. The number you provided is the part number for the catch you have referenced in your question to us. I hope this helps. Thank you and have a great day!

Hello Amy, Thanks for your question. You may want to test the thermal limiters and the door switch with a multimeter to see if they have continuity. Replace them if they fail continuity. I hope this helps.

Hi Timothy, Thank you for your question. We were not able to find a P66 error code, but we did find an E66 error code. Here is a link to a video from YouTube, that you may reference on how to remove the code from your dryer, https://www.youtube.com/watch?v=FD5GUfJpKDE. I hope this helps. Thank you and have a great day!

Hi Wanda, Thank you for your question. Before we can verify if we carry the door catch for you, we will need the model number from your dryer. We have included a link from our website that you may reference on where to locate the model number on your dryer. If you could resubmit your question with this information, we would be happy to help you. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!