Product Description
Condenser Fan Motor Kit Specifications
This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a mounting nut for the blade and a cushion. This part provides forced-air cooling for the condenser coil.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Amana Refrigerator Condenser Fan Motor Kit
Troubleshooting
This part fixes the following symptoms:
Fridge too warm | Freezer section too warm | Noisy | Fridge runs too long
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
Amana, Kenmore, Admiral, Whirlpool.
Part# 833697 replaces these:
AP3120994, 2790, 833697, 0054175, 0055586, 0056804, 0311168, 0312499, 10448601, 10448602, 10448603, 10522101, 10522102, 10522104, 10884501, 10884502, 10884504, 10884506, 10884507, 1101025
...
Show more
, 1101026, 1101073, 1101140, 1105656, 1105657, 1107713, 1107714, 1121292, 1129383, 12001314, 14210089, 14211095, 14251476, 14273186, 1531106, 1549266, 20009052, 205943, 205953, 21012-1, 2149963, 2154725, 2154735, 2154798, 2154998, 2162431, 2199155, 237129, 27515-1, 28056-1, 28056-12, 28056-13, 28056-14, 28056-15, 28056-16, 28056-2, 28056-3, 28056-4, 28056-5, 28056-6, 28056-7, 28056-8, 28056-9, 311168, 4343855, 4344273, 46000833697, 482737, 483019, 483079, 483213, 510634, 515272, 515273, 515396, 517322, 517385, 52186-9, 530423, 530760, 531106, 531585, 531594, 544058, 54503-2, 549047, 549048, 549266, 549299, 552919, 553235, 553236, 56804, 604292, 605292, 606289, 606339, 61001016, 61001018, 61001562, 61002038, 67560-1, 67560-10, 67560-2, 67560-3, 67560-4, 67560-5, 67560-7, 67560-8, 68445-1, 68445-3, 68445-6, 68445-7, 68481-1, 68481-2, 68481-3, 68481-4, 69289215, 799397, 80833697, 8118, 8170524, 8170704, 831350, 833518, 833697, 833697VP, 850015, 851445, 851476, 851578, 851618, 851619, 851629, 851630, 851735, 876443, 938077, 938078, 938164, 938271, 938375, 945466, 945566, 945583, 946538, 946539, 946679, 989532, 99989708, A0287801, B0532506, B0540006, B0544605, B0547205, B0551904, B0552001, B0552004, B0552604, B5603501, B5603504, B5646204, B5646301, C36617-1, C3661701, C36618-1, C3661801, C7584001, C87369-1, C8736901, C8766901, C8809801, C8891701, D0709217, D75840-1, D7584001, D7584002, R0150001, R0150002, R0950046, R0950211, R1500-1, UEM1021, WP61002038, Y0054175, Y0055586, Y0056804, Y0311168, Y0312499, Y61001016
Show less
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
FRED B - November 18, 2023
Verified Purchase
EXACTLY WHAT WAS NEEDED!
We have an older model Kitchenaid refrigerator purchased in 1996! It has all the features we need and love but it was starting to sound a little loud I ordered a new Condenser Fan Motor Kit from your very detailed list. It arrived as promised within a few days and after watching the 'very detailed' video provided, I was able to complete the installation quickly. It certainly made a difference and now our old reliable fridge is working quietly again. Would definitely recommend this site for parts and easy to follow instructions. Thank you for honoring your commitment for fast and accurate parts!
Jonathan G - October 30, 2023
Verified Purchase
easy repair
I had to look online for what wire went where but found it easy to replace
Mard D - May 13, 2023
Verified Purchase
Great
I received that part within 22 hours after buying. Nice surprise. This is the first time that I ordered from partSelect. This last month replacement was easy and that new Fan does the job. My refrigerator is happy.
Bindu V - May 30, 2022
Verified Purchase
Easy repair, great part - works as expected!
I bought this part for my Whirlpool side-by-side refrigerator. Even though it was not exactly the same as the part being replaced, I was able to connect it properly and now my fridge is working as it supposed to be. Thank you Part Select for making it possible.
GORD R - September 22, 2021
Verified Purchase
A perfect match
The fan motor was a perfect fit and the replacement took less than 1/2-hour. Now our freezer is ice cold once more.
David H - April 21, 2021
Verified Purchase
Great Part
My Condenser fan Motor went and the initial Generic replacement I bought from another place was so loud I was going to replace my refrigerator. This part was the same price as the Generic replacement, came quickly and, was as quiet as the original motor, so I am quite happy and can keep my Fridge
Olivier C - May 20, 2020
Verified Purchase
Happy customer
If you have the space between your fridge and freezer very hot, fridge too hot, freezer too hot and fan not working at the back, you need this piece. We were wondering what to do since there was no ground wire on our model but it was made without it and everything is fine now. 10/10.
Maurice P - May 7, 2020
Verified Purchase
Perfect!
Part was fine, exactly what I needed. Easy to replace. Shipping was fast and online service was great. Thanks!
Robert J - June 5, 2019
Verified Purchase
quality part fit was perfect
Instructions on line are excellent and make the fix a success
Michelle D - June 4, 2019
Verified Purchase
Easy part to order and replace
Part was correct and a fairly easy fix. New fan works well.
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 39 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Sometimes the condenser fan would start causing the refrigerator to overheat.
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire about two inches from the fan.
Cut and strip the new wire. I cut the new wire in half (about 6 inches.) Connect the two wires, twist and used 2 wire nuts. Tie wrap the wire to the wire harness. Mount the new fan (three screws)
Screw the back panel back on.
Mount the new
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire about two inches from the fan.
Cut and strip the new wire. I cut the new wire in half (about 6 inches.) Connect the two wires, twist and used 2 wire nuts. Tie wrap the wire to the wire harness. Mount the new fan (three screws)
Screw the back panel back on.
Mount the new
Other Parts Used:
-
Tom from Franklin, WI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
180 of 209 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noisy fan motor
rmv panel (5min) rmv fan/motor 3 screws (10 m) cut wire 2in from motor, re route remainder of wire to front so can strip for wire nuts. ( 10m) attach old fan to new motor, place in old opening ,3 screws, a little fussy to align, ( 15m ) route and strip wire from new motor , zip ties work well, wire nuts , plug in fridge vola, no noise, close up, reverse panel. ( 20m). i also took time to clean grilles with small vac and damp rag, ( looks and sounds like new) bob Wi.
Other Parts Used:
-
robert from nashotah, WI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Socket set
37 of 45 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer quit freezing -Fan motor quit and the water froze like a frozen waterfall and didn't make enough ice cubes.
First I unplug the refrigerator, then I unscrewed the cardbord cover with a screwdriver, disconnected the wires, unscrewed the screws, removed fan bracket with the fan. Since my wire connector was different, I had to strip the wires to connect the fan, twist wires together with the connecting wires, use wire nuts wire nuts and wrapped in black tape. I then hooked together the connection making sure the fan was rotating in the right direction. I then placed the fan bracket back in its place, lined up the screwed holes and installed the screws back to the original tightness. I plugged the refrigerator up to see if the fan was working properly. It was so I unplugged it again to start the nwxt part replacement.
The next part I installed was a icemaker and water dispenser water inlet valve. I turned off the incoming water valve. I removed the two screws that held the old water valve in place. Unplugged the two connectors, removed the water lines and reinstalled the new water inlet valve hooking it up the way I unhooked it. Then I turned on incoming water line, checked for leaks. I put the cardboard panel back on and was done. The two parts were successfully installed in an hour. We now have a efficiently working refrigerator and a cold freezer and have the proper amount of ice cubes that are supposed to be made.
The next part I installed was a icemaker and water dispenser water inlet valve. I turned off the incoming water valve. I removed the two screws that held the old water valve in place. Unplugged the two connectors, removed the water lines and reinstalled the new water inlet valve hooking it up the way I unhooked it. Then I turned on incoming water line, checked for leaks. I put the cardboard panel back on and was done. The two parts were successfully installed in an hour. We now have a efficiently working refrigerator and a cold freezer and have the proper amount of ice cubes that are supposed to be made.
Other Parts Used:
-
frankie from pelham, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
28 of 35 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator stopped cooling. Pulled it out of the alcove and plugged it back in. Compressor starfted but noticed condenser fan was not turning. Unplugged fridge and tried to turn the fan by hand - frozen.
Remove the back hardboard cover screws for access to the condenser fan. I opted to tip the fridge over on its side for even better access to the fan mounts and wire. Replaced the fan assy (reused the fan). Splice the wire and it's done.
Other Parts Used:
-
Florentino from Windsor Locks, CT
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
27 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old motor wouldn't turn the fan.
After moving the refrigerator away from the wall I removed the cover on the lower back of the unit by removing the screws that held it in place. The condenser fan was not turning and there was heat build up in the area causing the refrigerator to not work properly creating elevated temperatures in both the freezer and regrigerator. Removal of three torx screws from the original motor was all it took to get the motor free. By turining it and working the fan blade around the mounting bracket I had the motor out in just a few minutes. Replacing the new motor was just as easy to reinstall. The fan was removed from the old motor and placed on the new for installation. The original motor was wired to accept a connector from the wiring harness of the refrigerator. I simply cut the connector off the wiring harness and stripped the insulation from the wires which easily allowed me to connet the wires of the motor and harness with two wire nuts. Three self tapping screws were used to hold the motor in place replacing the torx screws. Installed I plugged the unit in and immediately the fan started spinning as the unit came to life. Cleaned and replaced the cover over the back and slid back into its spot. Running as good as it did when it was new. Easy job to take care of.
Other Parts Used:
-
Bob from Hesston, KS
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set, Wrench set
24 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer and Fridge wouldnt cool
My husband replaced the condenser fan. It took awhile and a few choice words but he got it replaced. The fan seemed to work fine, but it still wasn't cooling. I noticed that when we had the fridge unplugged that water started draining out the dials at the top of the fridge under the freezer. And there was absolutely no water at all in the drip pan under the fridge. So I took the doors off and totally took the inside of the freezer apart. I discovered that the styrofoam on the floor of the freezer had become inudated with fluid and the under the foam the coils were all frozen solid with ice. Hence not allowing any drainage. I put a lamp in the freezer area and defrosted all the ice. In searching the internet i discovered that they no longer produce the foam so i went to home depot and got a piece of foam and aluminum foil and cut it to replace the ruined foam. I put the fridge all back together said a prayer and crossed my fingers and lo and behold it works perfectly now!!!!
Other Parts Used:
-
Janet from Hillsboro, OR
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
24 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer too warm; noticed sides of refrigertor were warm
I saw on a partselect web site that these symptoms could be caused by a failed condensor fan motor. After removing the cardboard panel in back of the refrigerator I noticed the fan was not running when the rfigerator was. The fan was held in place by three brackets. I unscrewed the screws holding the fan motor to the brackets and also unscrewed one of the brackets to make room to pull the motor out. I cut the wires close to the motor. I removed the fan blade and secured it to the new motor. I had to reroute the old wires in order to have enough slack to use wire nuts to attach them to the leads on the new motor. I then re-attached the motor to the two brackets remaining in place and then re-attacehed the third bracket I had removed to get the motor out.. The most difficult part was working in a very confined space.
Other Parts Used:
-
W from Nellysford, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
22 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrig making a lot of noise
The motor kit had only two wires coming out of it. The existing one in the refrig had 6. I spliced the 2 red to one black on the new part and 2 white to the other black wire on the new part. The two green I attached to a screw. I left the 6 wire harness in place just cut off the plug piece that went into the old motor, and spliced all my wires.
Worked great!
Worked great!
Other Parts Used:
-
Carol from Monroe, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
17 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator fan was not fast enough
My refrigerator condenser fan was burned out, and it was so weak you could stop it with your hands, and over time it will stop working.
I order a replacement and change it my self, all you got to do is take the cover from the back off and unscrew the fan + blade it was like 3 screws; I did had to cut the wires because the original fan had a connector the replacement did not had, but that was no biggie, it all works now it's been over a week so I call it a success.
I order a replacement and change it my self, all you got to do is take the cover from the back off and unscrew the fan + blade it was like 3 screws; I did had to cut the wires because the original fan had a connector the replacement did not had, but that was no biggie, it all works now it's been over a week so I call it a success.
Other Parts Used:
-
Jose from Gilbert, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
15 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer was not staying cold enugh for ice maker to work. Discovered fan was not working to cool condensor. Fan motor would only run if manually turned.
Unplugged refrigerator. Removed lower back access panels and panel running up the back of refrigerator. Removed and disconnected old fan. Removed old fan motor from mounting bracket. Removed fan blade from old fan motor and placed on new fan motor. Connected new fan motor to power supply. Tested. Reinstalled.
Other Parts Used:
-
David from Cedarville, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers, Socket set
14 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
September 16, 2017
Lately it wasn't cooling properly. I cleaned the coils which was very dirty and notice the fan wasn't turning. I turned the fan blade and it started turning. It has been working great for about 2 months, today it wasn't cooling properly again and the outsides was real warm. I checked the fan and it wasn't turning, i turned the fan lightly and it started spinning again, what part do i need to check or replace?
For model number whirlpool ET18PKXAW01
Hello Scott, thank you for contacting us. That would be a weak fan motor, you would just need to replace that to fix the issue. Good luck with the repair!
33 people found this helpful.
Was this helpful?
Thank you for voting!
George
September 8, 2017
To determine which direction a motor is turning do i look at the shaft or do i look at the opposite end
Hello George, thank you for contacting us. For the fan motor it would spin clockwise. Good luck with the repair!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
September 1, 2017
My refrigerator is not cooling properly. I can feel the cold air being distributed in the freezer compartment but there is no air coming through the vents in the refrigerator section. The condensor fan seems to be spinning underneath the fridge. Which part would you consider needing to be replaced?
For model number ET22PKXWN10
Hi Chris,
Thank you for your inquiry. If your refrigerator is not cooling properly, there are a few parts you will need to check. You will need to check the defrost timer, the condenser fan motor kit, the capacitor, the evaporator fan motor kit, the cold control thermostat, the fresh food door gasket, the start relay cover and the light rocker switch. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
August 31, 2017
Freezer is working fine but the refrigerator is too warm. Hovering around 55 degrees. The compressor fan seems to be working. Maybe not working as efficiently?
For model number ET22PKXWN10
Hi Chris,
Thank you for the question. I suggest checking the Door gasket first. Make sure there are no gaps that could let the warm air leak through. In the evening when the room is dark you can put a flash light in the fridge and see if there is any light coming through once the door is closed. If you see light then the gasket will need to be replaced. If the gasket is fine you can check the Evaporator Fan Motor at the back of the freezer. This part pulls air into the evaporator coils and then disperses the air in a continuous motion throughout the refrigerator and freezer.If this is not working then the cold air is not flowing in to the fridge section as it should. It can get build up of dust and dirt over time and sometimes needs a cleaning so the fan it working properly. Since you are back there it sometimes help to vacuum off the coils!
Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Mary Lou Grimsted
November 18, 2017
Our Maytag refrigerator was purchased new some years ago, the ice maker never hooked up, (our mistake) however now, some years later, there is a layer of ice every two weeks at the bottom of the refrigerator that must be hand removed...how can we repair this?
For model number MOD: MBF 2256KEB3
Hi Mary,
Thank you for your inquiry. Based on what you described, the reason why there may be ice building up on the bottom of the refrigerator is the refrigerator is cycling too often, it's leaking water or there is ice buildup in the freezer. If it is cycling too often then there is probably a build-up of dust on the condenser coils and they will need to be cleaned or the temperature in the refrigerator is set too low. If it is set too low, you will need to adjust the temperature. If you have leaking water in your refrigerator you may have a blocked drain caused by food particles or other debris. Try to flush the drain with warm water through a funnel. The water tubing may also be clogged and you may have to clean it. If there is ice buildup in the freezer, it may be caused by leaving the freezer door open allowing the humidity inside to increase. Try not to leave the freezer door open any longer than it should be. There may also be an issue with the freezer door gasket and you will need to replace it. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Leo
July 8, 2019
How do i trouble shoot a condensor fan?
For model number ARB2117AW
Hello Leo, thank you for your question. If your refrigerator isn't keeping as cool as it should and you feel like the fans are running more than they should you could have a freon problem or a condenser fan motor gone bad. A good way to tell if the condenser fan is not working is to check the area when the compressor is running. If the compressor is running but the fan is not, the fan would need to be replaced. I hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
August 30, 2019
When the compressor cooling fan is properly installed does it turn counterclock wise?
For model number ET18KKKXAWOO
Hello Robert, thank you for your question. Yes, it rotates the fan in a counter clockwise direction. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Rob
December 11, 2019
Fridge not cooling but condenser fan is working and freezer is cold? What to check?
For model number Maytag PBB1951GRW
Hello Rob, thank you for your question. There are a few parts we would recommend testing to determine what the issue is. They are Defrost Thermostat Kit Part Number: 12001937, Defrost Timer - 120V 60Hz Part Number: WP67001036, Freezer Evaporator Fan Motor - 115V 60Hz Part Number: WPW10128551, and Defrost Heater Part Number: WP67002135. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Danny
August 7, 2018
My freezer works as it should but the refrigerator section is warm. What do i need to do to fix this?
For model number MTB1954AR
Hi Danny,
Thank you for your question. If the refrigerator is too warm, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the condenser fan motor, the defrost timer, the evaporator fan motor, the defrost thermostats, the door gasket, the defrost heater and the temperature control assembly. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Lenny
February 6, 2020
Will this fan run quiet? The existing one is very loud.
For model number 9502186252 BX22A2L
Hello Lenny, Thank you for the question. This is a OEM part and will run the same as the original. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS395284
Manufacturer Part Number: 833697
Manufacturer Part Number: 833697
Brand
Model Number
Description