Vent Grille - Biscuit

removed the two screws, removed all of the broken tab pieces, replaced with new grill, put the two screws back.,....DONE Easy as pie

After reading other entries, I have determined this is a problem with most grills on the whirlpool microwaves. Defective material ..becomes brittle and crumbles.

Removed 2 screws from top of microwave. Place new grill in place. Replaced 2 screws that were removed. What was wonderful is I ordered the part around 3 pm on a Friday. The part arrived at 9AM the next day and that was without requesting special shipment.

Removed old grill from microwave and replace with new part. Range removed old switch and
replaced with new part. No problems. I was pleased with the way the parts were expedited to me.

took off old and replaced with new.
2 minutes mostly looking for stool to stand on to remove and replace screws.

the new part fit just right. put in place and screwed in with existing screws. like a glove.

Simple repair. Remove 6 screws to remove old grill and replace with the new grill using the old screws.

PRAY !Pray hard

Removed retaining screws and broken parts; inserted new grill and screws. Fin!

PartSelect was the only company to show that the part came in 3 different colors. The grill vent was used to replace a cracked vent. It was simmple to slip in the new vent,but be sure to save the existing screws that holds the vent in place

This is a very basic job that a ten-year-old can do. Simply remove two screws at the top of the unit, remove the broken pieces of grill, snap the new one in place, and replace the screws. Oh, yes, I also cleaned out the foam and aluminum filter and cleaned some of the grease from behind the filter.