Whirlpool 814399 - Receptacle Kit | PartSelect.ca
Receptacle Kit – Part Number: 814399
( Grid squares measure 1x1 inch )
Receptacle Kit – Part Number: 814399 Receptacle Kit – Part Number: 814399 Receptacle Kit – Part Number: 814399 https://partselectca.azureedge.net/Schematics/Whirlpool/8VEJ4BYT.gif

Receptacle Kit

Your Price

CAD$39.37
In Stock

PartSelect Number PS389217
Manufacturer Part Number 814399
Manufactured by Whirlpool

This surface burner receptacle assembly comes with the receptacle, two wires, two wire nuts, and two pieces of heat-shrink tubing.

This part works with the following brands: Whirlpool, Roper, Estate, Inglis, Maytag, Amana, KitchenAid, Crosley, Magic Chef.

This part works with the following products: Range, Cooktop.

This part fixes the following symptoms: Element will not heat

Videos For installing this part.

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Carlos
April 30, 2018
My oven doesn't heat at all. The clock doesn't work but all of the top elements will burn. What could be the causing this problem. Please help! Thanks
For model number WFC150M0EW0
Hi Carlos, Thank you for your question. There are a few parts that you could check. I would suggest testing your elements and your temperature sensor. You can test all three of those parts with a multi meter. If they are all working then it may be your electronic control board that is the issue. I hope that helps. Good luck with your repair.

5 people found this helpful.

Was this helpful?
Deborah
January 14, 2019
Trouble with burners on stove they will heat up to high when they are set on low.
For model number WFC150M0EB0
Hi Deborah, thank you for your question. Be sure to cut power to your appliance and remove any parts before doing tests. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your element. It should be reading between 0 - 50 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. It could also be your wiring that is the issue but you should see visual damage on that part in most cases. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Earl
November 17, 2019
Replaced receptacle and stove top burner, burner still doesn't work. What can be the issue?
For model number RF365PXMW1
Hi Earl, the only thing left would likely be the switch for the burner. Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?

Customer Repair Stories

Average Repair Rating: 4.3 / 5.0, 14 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Tim from Pittsford, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP9761346, 814399
Stove would not heat up
Cut old wires to receptacle, striped the wires, wire nutted to new receptacle, screwed new receptacle into stove and installed heating element.

Piece of cake, but then again my degree is in electrical engineering so I should be able to handle a couple of wire nuts.
82 of 102 people found this instruction helpful.
Was this instruction helpful to you?
Thomas from Longwood, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WPW10259865, WP660532, 814399
Stove heat was inconsistent and
After turning off the circuit breaker, I removed the elements and pans, raised the top and cut the wires to the receptacle assembly. Stripped the wires, slid on the shrink tubing and applied the wire nuts. I used a hair dryer rather than a match to shrink the tubing. Reinstalled the drip pans and inserted the elements. The instructions were clear and the project was easy. The stove works like new.
43 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Rolland from Walla Walla, WA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
814399, WP660533
Receptacle burned out, due to short
This was the second repair of the same problem. I realized this time that there was a poor connection between the burner and the receptacle causing a arch, creating extra heat and burning out the receptacle.
All that I had to do was to cut two wires to the existing receptacle assembly and use the wire nuts to connect the new assembly and one philips screw holds it in place...The kit required me to assemble it first and there were four items to put together. No problem....
16 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Tracy from Green Cove Springs, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
814399, WP8053334, WP3195546
3 burners had stopped working and drawer glides broke.
Removed the old burners and lifted top assembly. It made it easier to work with the wires by removing the top, easily remove the screws holding the wire harness and ground wire, then slid the top to the right and it came right off. splicing the wires in was very easy and all the parts required were sent with the kits. reassembled stove and it worked like a champ. The drawer was very easy as well the plastic glides were all broken or worn out, and one screw each to replace. like a new oven now, saved at least 300 by not purchasing a new one.
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Steve from Mount Carmel, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
814399, WP660533
heating element and socket needed to be replaced
It was very easy, the element is held in place by a point that protrudes from the element's frame through a hole in the stove top. This hole is located directly across from the electrical socket your bheating element plugs into, under the stove top. Push the heating element in towards the socket and the heating element can now be lifted up and out of the burner tray. Remove the burner's reflector tray. Remove the single screw securing the elements electrical socket to the stove top. Lift the stove top up and secure. Remove socket and cut wires about 4 inces from the old socket. place shrink wrap over each wire and wire nut new socket to existing wires. place shrink wrap over wire nuts and heat to secure. reverse proceedure and test.
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Pedro from kent, WA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPW10259865, 814399, W10290350RW
elements would not work at times
simply removed the old elements and receptacles and installed the new ones. The fit was perfect. My range looks new again.
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
DAICHI from Louisville, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
814399
Stove burner wouldn't heat
First I disconnected the power, removed the screw that hold the element in place. Then, I pulled the element out and cut the two wires. I connected the two wires with the new element as the instruction provided by Part Select. I put the element back and screwed it in place. I plugged in the power and turned on the burner. It works. It is really easy to repair.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
ANN from MANITOWOC, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
814399
Receptacle Assembly Has Burned Out
Remove old receptacle and connected and replace new one. Burner now works perfectly again.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
wayne from whittemore, IA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
814399, W10196405RW, W10196406RW
back burner would not heat
removed the heating element then removed the screw that holds the plug in on cut the two wires and reconnect the two wires and put back
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Norman from Newport, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
814399
burner plug broken
Cut wires removed old plug,new plug in wire nuts on.Put heat on shrink tube done.
Less than 30 min.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
7 Reviews
4.9
out of 5
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5
-
Verified Purchase
Part works perfectly

The part corrected my malfunctioning element athough the instruction stopped short of showing how the part was supposed to be connected to the element. Luckily, I watched the video which was extremely helpful. Also, the part came within a day of ordering - very speedy!

5
-
Verified Purchase
Great OEM parts

Parts’s came fast and my appliance is back in order. Great service as usuall!

5
-
Verified Purchase
Great parts.

Bought aftermarket from another vendor but it was garbage. Bough from partselect and a big difference in the quality of parts and with an easy installation. Will use again????

5
-
Verified Purchase
Parts are good and working fine...

Parts are good and 2 out of 4 are working fine. I did not use the other 2 yet.

5
-
Verified Purchase
Easy repair. Great part!!!

Part was easy to install. Stove works like new again!!!

5
-
Verified Purchase
Easy repair, quick delivery

It’s all in the title. I ordered over the phone the guy was really helpful. Fixed my stove! Yesssssss

4
-
Verified Purchase
Easy repair!

I received my receptacle kits in Quebec city within 24 hours, thanks to the videos on YouTube the repairs were made simple and easy, everything works fine, the only sad part is that the OEM parts are very expensive in fact a couple more parts and I would have trashed it and bought a new stove!

Model Cross Reference

Brand
Model Number
Description
Whirlpool
4RF302BXEQ1
Range - Freestanding, Electric
Whirlpool
4RF302BXGQ0
Range - Freestanding, Electric
Whirlpool
4RF302BXGQ1
Range - Freestanding, Electric
Whirlpool
4RF302BXKQ0
Range - Freestanding, Electric
Whirlpool
4RF302BXKQ1
Range - Freestanding, Electric
Whirlpool
4RF315PXEQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXGQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXKQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXMQ0
Range - Freestanding, Electric
Maytag
ACR2303MFW4
Range
Maytag
ACR4303MFB4
Range
Maytag
ACR4303MFS4
Range
Maytag
ACR4303MFW4
Range
Maytag
ACR4503SFB4
Range
Maytag
ACR4503SFW4
Range
Amana
AEP200VAW0
Range - 20" ELECTRIC FREESTANDING RANGE
Amana
AEP200VAW1
Range - 20" ELECTRIC FREESTANDING RANGE
Amana
AEP222VAW0
Range - ELECTRIC RANGE
Amana
AEP222VAW1
Range - 20" ELECTRIC FREESTANDING RANGE
Maytag
AEP222VAW3
Range
Maytag
AEP222VAW4
Range
Amana
AER5522VAS0
Range - FREE STANDING - ELECTRIC
Amana
AER5522VAW0
Range - FREE STANDING - ELECTRIC
Amana
AER5522VCS0
Range - FREE STANDING - ELECTRIC
Amana
AER5522VCW0
Range - FREE STANDING - ELECTRIC
Amana
AER5523XAB0
Range - 30" ELECTRIC FREESTANDING RANGE
Amana
AER5523XAQ0
Range - 30" ELECTRIC FREESTANDING RANGE
Amana
AER5523XAW0
Range - 30" ELECTRIC FREESTANDING RANGE
Crosley
CE11000VAV0
Range - Freestanding, Electric
Magic Chef
CER3311XAW0
Range - 30" ELECTRIC FREESTANDING RANGE

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2021, Eldis Group Partnership. All rights reserved.