Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kathy W - May 13, 2023
Verified Purchase
Grate pads work great!
These grate pads work well protecting the stove from the metal grate.
★★★★★
★★★★★
Peter S - April 1, 2022
Verified Purchase
Wrong Part - No Sizes or Dimensions Shown
turned out to be the wrong part, impossible to determine from the information provided as there is no actual reference dimensions......................:-(
April 8, 2022
Hi Peter,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
★★★★★
★★★★★
Barry W - March 17, 2022
Verified Purchase
Replacement rubber feet on gas grill.
Wrong part, shipping was more than the cost of parts. Parts didn’t weigh 2oz. Shipping was over $10..
★★★★★
★★★★★
Hardeep K - February 11, 2022
Verified Purchase
As described - scratching
Should have ordered years ago as the steel is now permanently scratched. Part is over priced, however, it would have prevented the scratches
★★★★★
★★★★★
Norina B - November 5, 2021
Verified Purchase
worked great . They are just a little higher than the originals but better than the rocking that was happening before
Part was here in 2 days .great
★★★★★
★★★★★
Marlene C - April 30, 2021
Verified Purchase
Burner grate pads
Excellentt service. Ordered and delivered in 24 hours!!
★★★★★
★★★★★
Krista B - June 9, 2020
Verified Purchase
Easy repair. Worked as expected.
Received it within two days. Amazing service being we are in the middle of a pandemic.
★★★★★
★★★★★
Gary G - November 20, 2019
Verified Purchase
These nubbies are too small.. didn’t work well.
These nubbies are just not fat enough.. they fall out of the grill.. any suggestions?
★★★★★
★★★★★
Wendy M - October 6, 2019
Verified Purchase
Burner Grate Pads
The parts fit almost - I would suggest that they have a slight bit more girth to fit in the holes - so quite disappointed but what options are there? None. And the price - it’s terrible - so I had to pay $1 per tiny rubber bumper with only a half dozen in each bag and I needed 7 so I had to buy 2 bags and add shipping and is over $30 for rubber bumpers that hardly fit - they fall out with the least provocation - I had to crazy glue them in - and that is the actual size for my make and model of stove - so not happy
★★★★★
★★★★★
Samuel P - March 5, 2019
Verified Purchase
Quick delivery! Great to have extra pieces.
I was grateful that this part was available. Not indispensable, but provides peace of mind knowing that the stove top will be protected from scratches and the grate will remain level without rattling. Worth the $20.00 which includes the delivery fee.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 10 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Too much heat caused the turntable to shatter and the table support ring to melt.
Washed the turntable and placed it in the microwave.
several grate pads fell out/lost /broke during cleaning
The only real issue was locating the proper adhesive to ensure that the new pads would not fall out. The small insert paper slip in the package noted that a RTV adhesive should be used. After much searching at the home improvement super store, I learned it would be found at an auto supply store. It is black, and is for high temp use. It is available in a small tube for around $2.00. The RTV is usually used to make gaskets for heat/oil exposure in auto repair. I did have trouble removing a broken stub from a pad that had broken off in the hole. I used an awl to get what I could and push the rest into the hole deeper, then insert a new pad with along with the adhesive.
Other Parts Used:
Sabrina from Mooresville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
61 of 67 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rubber pads on bottom of grate broke off, grate was scratching stainless steel top
I just put the grate pads in the bottom of the grate. The repair was a snap.
Other Parts Used:
Melissa from The Woodlands, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
13 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner grate pads came off over time and were lost, knob skirt clips had broken
attached grate pads with GE clear silicone caulk (withstands heat) to burners. skirts just snap in.
Original bumper pads NOT glued into the burner grates. Hence they began to disappear during routine use and cleaning. Very simple repair with a little glue this time around. But fairly expensive for a very small part set
Other Parts Used:
Martin from Denver, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
grate pads not available from kitchen aide
Been looking for grate pads for 10 years and finally found you site and part # WPL 814323. Wasn't sure that they would fit but couldn't even find new grates so decide to try them --Fit perfect. Kitchen aide stove top gas with round grates. Used the drill to clean out the holes with broken pads still embedded.With clean holes the new pads just screwed in like the originals. Thank you very much
Other Parts Used:
Robert from Rio Rancho, NM
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pads melt and fall out of the burner grate
cleaned out pad area with an awl. then the pads just slide in.
Other Parts Used:
Karen from Palm Desert, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
missing grate pads
remove grate - flip upside down - be sure holes are clean and dry - using toothpick, swab some RTV sealant into the holes and a bit on the pads ... insert pads till they seat - be sure to hold in place till all air is evacuated - wipe excess RTV with paper towel...DONE
Other Parts Used:
joe from des plaines, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
grate pads were gone, making cleaning difficult
Put the new pad in and it was done. Very easy.
Other Parts Used:
Christie from Provo, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rubber grate pads that protect the range top had worn and were flat.
It didn't. The grate pads (PN# PS389174) were too small for the grate (W10311216) and wouldn't work. (PN# recommended by Whirlpool parts department) The pads were smaller in diameter and shorter. Yes I could have glued them in, but because of the size the pads would be flat in no time. The only thing I could order from KitchenAid was the total grate. I ordered the pads late December, they were backordered. I got them the 1st week of February. I tried getting through to Whirlpool by calling to see if there was something I could reorder, but no luck, couldn't through. Am I unhappy? Oh some, but I handle it. Its not the first time I have been rode hard and put away wet.
Other Parts Used:
Herbert from LATON, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
VG
February 7, 2022
Will these burner grate pads fit my range - KDRS467VSS04? Thank you!
For model number KDRS467VSS04
Hello VG, thank you for your question. We have researched the model you have provided, and we would suggest the Grate pads, part number PS988447. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Maritza
February 28, 2018
Need to know if item # 814465 or 814323 are compatible with my model, these are the rubber feet for the grate on the gas range
For model number FPGH3077RFA
Hi Maritza, Thank you for the question. Unfortunately the rubber feet for these grates are not sold separately from the grates themselves. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
July 14, 2021
What is the # for replacement spark ignighters. This KitchenAid glass cooktop is about 18 years old.
For model number kGCT305BBL4
Hi Robert,
Thank you for your question. The part number listed under your model number for the spark electrode is PS11740866. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
I am wondering if this bumper is compatible with the grates for model ksdg950ess
For model number KSDG950ESS
Hi Natalie, thank you for your question. Regrettably your grate feet only come with the grates for your appliance. I hope that helps. Good luck with your repair.
Wondering if these rubber feet are compatible with my KitchenAid dual fuel range? If not, what part number should i be looking for?
For model number KGRS505XSS
Hi Heidi, sadly we could not find the requested parts, I recommend contacting the manufacturer directly. If they can provide you with a part number you can check back to see if we stock the part. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Victor
July 6, 2021
Elkit que tienen cuantas almohadillas trae ya que yo necesito las de todas las regillas y 5 regillas
For model number KGCT366EBL0
Hola Victor, Gracias por la pregunta. Este kit incluye 5 almohadillas. Si necesita más de 5 almohadillas, deberá solicitar otro kit, ya que no se venden individualmente. ¡Esperamos que esto ayude!
Was this helpful?
Thank you for voting!
Dana
February 10, 2022
Do these rubber pads fit my grate?
For model number KGCS166GSS
Hello Dana, thank you for writing. Our research indicates the correct burner grate pads are PartSelect Number PS389247. We hope this helps.
Was this helpful?
Thank you for voting!
Neil
February 16, 2022
Trying to find rubber bumpers for the stove top grates. Kitchenaid has part number for grate only.
For model number YKSDB900ESS1
Hello Neil, thank you for your question. We have researched the model you have provided, and we would suggest the BUMPER, part number FIX12070915. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Looking for grate feet replacement for this model ?
For model number CGDS3065PFH
Hi Randy,
Thank you for your question. There is a grate foot kit listed for Frigidaire gas ranges. It includes the feet and adhesive. The part number listed for it is PS2373826. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
