Maytag/Maytag_Thumb/32589.gif
See part 25 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Flat Style Oven Igniter

★★★★★
★★★★★
3 Reviews
$66.70   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS387058
Manufacturer Part Number 786324
Manufactured by Whirlpool
Product Description

Flat Style Oven Igniter Specifications

You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Will Not Start | Little to no heat when baking
This part works with the following products:
Range, Wall Oven, Cooktop, Microwave Oven Combo.
This part works with the following products:
Amana, Caloric, Whirlpool, Maytag.
Part# 786324 replaces these:
AP2934763, 1191, 786324, 0309145, 0062766, 0063148, 0064395, 0064446, 0064671, 0068025, 0068026, 0068043, 0087699, 0308103, 0309145, 0309157, 0309158, 0309159, 14210904, 31939901 ... Show more , 4157300, 4179150, 4315139, 4363426, 786324, 786659, 786660, 87699, R0710104, R0710221, Y0062766, Y0063148, Y0064395, Y0064446, Y0064671, Y0068025, Y0068026, Y0068043, Y0087699, Y0308103, Y0309145, Y0309157, Y0309158, Y0309159, Y87699 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Mark
    November 2, 2017
    Is there a way to test the flat style oven igniter before replacing it? Whirlpool oven does not come on.
    For model number SF378PEWN0
    Hi Mark, Thank you for the question.The oven igniter should have a resistance reading of 3.2 to 3.6 ohms. If the igniter ohms are good,you can check the resistance of the oven safety valve. The gas valve should have 1.5 ohms of resistance. If the gas valve is good, the oven thermostat should be checked,It should read approximately 1080 – 1090 ohms at room temperature.The igniter requires 120vac to operate. If all other parts check out but the igniter is not getting 120vac you may need to replace the control board. Hope this helps!

    6 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Dave
    January 1, 2018
    I have a Caloric wall oven after 10 min it fails to stay lit . Igniter still glows red hot could this be a bad igniter
    For model number rw212
    Hello Dave, Thank you for your inquiry. This is one of the parts it could be, I would also check the gas valve, the electric control and the temperature sensor. I have included a link to a video on troubleshooting this symptom. Hope this helps! https://www.partselect.com/Repair/Range-Stove-Oven/Gas-Igniter-Will-Not-Light/

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Robert
    October 17, 2019
    Our Caloric oven will not light. I want to replace the igniter but i think the model number is rsr363 but i cannot find this on various parts lists.
    For model number rsr363
    Hello Robert, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS387058. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Brandon
    November 25, 2017
    Is this part covered by a warranty?
    Hi Brandon, Thank you for your question. We have a 1 year warranty on all parts purchased with our company. I hope that helps. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Mark
    June 29, 2021
    igniter glows red/orange the gas tube lights but the oven heats slowly with a smell of gas. All gas connections are tight . Once in a while the oven operates efficiently.
    For model number ARGS7650WW
    Hi Mark, Thank you for your question. If you are smelling gas during the pre-heating stage, what you are smelling could be odorant. Odorant is an additive that is added to natural gas and propane and it is normal to smell this when the oven is pre-heating. Depending on how much of the odorant was added to the gas by your supply company, the smell can vary from low to strong. If what you are experiencing is a gas smell, then you may have a weak igniter and it will need to be replaced. If what you are experiencing is a rotten egg smell, then you need to turn the power and gas supply off to the oven, ventilate your home by opening the windows, leave the house and contact the company who supplies your gas. We hope this helps! Good luck with the repair!

    Was this helpful?
    Thank you for voting!
    Erik
    December 11, 2018
    What is the size of the wire on the part? I have to replace one of the ceramic wire nuts and i would like to be sure of the wire size. The part that i ordered does not come with replacement ceramic wire nuts.
    Hello Erik, Thank you for the question. Very sorry but we do not have the dimensions for the wire. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Lou
    November 11, 2017
    Bough igniter and install it. Still does not work. This a modern maid build in double oven about 26 year old ... the bottom oven works but not the top one ...the does not come on.do you have any ideal what it may be? the model # was hard to make out...
    For model number phu202uk
    Hi Lou, Thank you for your inquiry. If your upper oven is not working, you will need to check the oven igniter. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.9 / 5.0, 35 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.
      After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires were attached back behind a hole in the back of the oven. I thought I would have to access them from the back but when I pulled on them I was able to reach them from the front. I was surprised to find plastic lugs covering the wire ends, rather than ceramic. I attached the new ignitor wires and reused the plastic lugs, as no ceramic ones came with the new ignitor. I carefully slid the new ignitor back into the cage/shield attached to the manifold and replaced the manifold. I then turned the gas back on and tested the ignitor (which worked perfectly) before replacing the oven plate. The repair took less than 30 minutes, but my wife and I thoroughly cleaned the door and interior while we had it apart. The hardest part was getting the door back on the hinges, but this too was accomplished after several attempts. The oven heats up beautifully now.
      • John from Niles, MI
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        786324
      79 of 83 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The Amana oven & broiler igniters failed after 7+ years of service
      Broiler Igniter:

      Disconnected stove from electricity

      Removed the two screws that hold the broiler igniter assembly

      Pulled asembly out to expose ceramic wire nuts

      Removed ceramic wire nuts and save them

      Removed broiler igniter assembly (broiler igniter & brolier mounting bracket are assembled together)

      Loosened screws/nuts that hold the broiler igniter to the brolier mounting bracket

      Remove old broiler igniter

      Carefully inserted new brolier igniter into the broiler igniter bracket

      Place the brolier igniter bracket into position. Make sure you look at the diagram provided so the position is correct. There is a "up" & "down" side to the broiler igniter

      Tightened screws & bolts on broiler igniter bracket

      Reconnected the ceramic wire nuts

      Inserted two mounting screws and tightened

      Finished.

      Oven Igniter:

      Removed oven door

      Removed bottom oven drawer

      Removed nut that holds heat shield/disperser in place

      Removedheat shield/disperser

      Removed all oven tray screws

      removed oven burner

      disconnected oven igniter

      disconneted oven igniter assembly

      inserted new oven igniter

      reassembled
      • Mark from Munroe Falls, OH
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        786324, WP31940001
      27 of 27 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven would not light
      After the appliance store told me that the repair would cost about $500 to fix an oven that wouldn't light we didn't have the money to repair it or buy a new one so we went without an oven (only the oven) for almost 1 year. The igniter would glow but the oven would not light. my son found your site online and passed it on to me. It was so simple it's almost funny. I opened the oven door and removed the burner cover. Then reached in and removed the three screws that held the igniter in place. Turned off the gas, disconedted it so I could pull the stove out to get behind it. Found the wires to the igniter and undid the 2 wire nuts. Removed the igniter cover from the old one and slid it onto the new one. Be very careful because the igniter is very delicate and be sure to not toucjh the heating eliment. Slid the new part into place, reinstalled the screws, connected the new wires with the old wire nuts, reconnected the gas and turned on the oven. BAM it worked like a charm.
      • Rick from Laguna HIlls, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers
      • Parts Used:
        786324
      11 of 11 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven ignitor stopped working (does this every 6-7 years)
      First we removed the oven doors. Then removed the shelf that separates the oven from the broiler, giving us more room to work. At first we thought we needed to loosen the screws around the bracket holding the ignitor, but we realized that the burner needed to be removed. Lifting the burner up from the front gave us the room to pull it gently from the back of the oven wall, giving more room to pull the wires connected to the ignitor from the back of the oven wall out and then disconnecting them. Then carefully pulling the ignitor out of the bracket.

      Putting the new ignitor in was easy. Carefully sliding it into the bracket, not touching the ceramic piece, connected the electric wires, pushed the wires back into the hole in the back of the oven. Then placing the burner back into place.

      We then turned on the gas and the electricity and the ignitor glowed and the burner lit. PERFECT! In the past we've had a repair man come in and this time we saved $100. Even more perfect.
      • Jean from Manalapan, NJ
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Parts Used:
        786324
      11 of 13 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      my oven took for ever to light after a while it didn't
      i disconnected the power supply, took all shelves out of oven, removed screw that holds the bunner to oven, removed bunner along with igniter. cut wires to igniter wired new igniter , tested before
      installing bunner,( ok) installed bunner and screw
      fired up and all is well.
      • joseph from wyandotte, MI
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        786324
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven wouldn't heat up, but everything else worked, broiler and gass range
      was so each, we removed the door and the racks. and the bottom drawer out. All we had to do was remove the ignitor that was held in wtih screws we could read the wires from the bottom of the oven and then put the new one in and attached the wires from the bottom. We had read reviews of others that did the same repair and were confident that we could do it because they described it and said it was so easy. Thanks everyone.
      • Angela from carol stream, IL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        786324
      7 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Broiler Igniter failed
      Had to take entire back panel off, to disconnect wiring. Once disconnected, removed two screws holding up igniter in oven. Pulled it through and removed from holder, Be careful new igniter very fragile. Reconnected, put panel back on, then turn on to verify, all went well, fully operational.
      • Ramon from Little Falls, NJ
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers
      • Parts Used:
        786324
      5 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      switches knobs and igniter replaced
      Very easy, I just hope appliance has more life in it to justify repairing it.
      5 of 25 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Stove would heat up but smelled gassy after cycling
      Repair can be done through the oven after removing the dip pan on top of the oven burner. The drip pan slids out - no tools needed. Remove 1 screw that holds the element close to the burner and 2 screws that hold the element cover to the stove. Remove bottom drawer and remove wire nuts from element wires. Reverse the process to install new element. Care must be taken to avoid damage to the element as it can be easily broken. I cut and stripped the wires coming from the stove valve as they were not in good shape after removing the wire nut.
      • Paul from Ham Lake, MN
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        786324
      4 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      no heat
      i read other stories and found after checking rotating heat switch with ohm meter found the igniter was the problem, pulled up on door and it came off, found bottom of oven pulled up and out, removed wing nut from deflector and two bolts and one wiring connector, just reversed removal to install new igniter and all complete, took about 20 minutes,
      • michael from WILLITS, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        786324
      4 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      3 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        3
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS387058
          Manufacturer Part Number: 786324
          Brand
          Model Number
          Description
          Amana
          2970A
          Range - GAS RANGE
          Amana
          ACS3350AB
          Range - Gas
          Amana
          ACS3350AB0
          Range - AMANA RANGE- S/C S/I GAS
          Amana
          ACS3350AC
          Range - Gas
          Amana
          ACS3350AC0
          Range - AMANA RANGE- S/C S/I GAS
          Amana
          ACS3350AS
          Range - Gas
          Amana
          ACS3350AS0
          Range - AMANA RANGE- S/C S/I GAS
          Amana
          ACS3350AW
          Range - Gas
          Amana
          ACS3350AW0
          Range - AMANA RANGE- S/C S/I GAS
          Amana
          AGC710
          Range
          Amana
          AGDS900WW
          Range - Amana Range/Stove/Oven Model AGDS900WW/P1131812NWW Parts
          Amana
          AGDS901E
          Range
          Amana
          AGDS901WW
          Range
          Amana
          AGDS901WWP1131817NWW
          Range - Amana Range/Stove/Oven Model AGDS901WWP1131817NWW Parts
          Amana
          AGDS901WWP1131821NWW
          Range - Amana Range/Stove/Oven Model AGDS901WWP1131821NWW Parts
          Amana
          AGDS901WWP1131824NWW
          Range - Amana Range/Stove/Oven Model AGDS901WWP1131824NWW Parts
          Amana
          AGDS901WWP1131826NWW
          Range - Amana Range/Stove/Oven Model AGDS901WWP1131826NWW Parts
          Amana
          AGDS901WWP1131827NWW
          Range - Amana Range/Stove/Oven Model AGDS901WWP1131827NWW Parts
          Amana
          AGDS901WWP1131829NWW
          Range - Amana Range/Stove/Oven Model AGDS901WWP1131829NWW Parts
          Amana
          AGDS902E
          Range
          Amana
          AGDS902E-P1131828NE
          Range - GAS RANGE
          Amana
          AGDS902E-P1131831NE
          Range - GAS RANGE
          Amana
          AGDS902E-P1131833NE
          Range - GAS RANGE
          Amana
          AGDS902SS
          Range - Freestanding, Gas
          Amana
          AGDS902SS-P1131828NSS
          Range - Amana Range/Stove/Oven Model AGDS902SS-P1131828NSS (AGDS902SSP1131828NSS, AGDS902SS P1131828NSS) Parts
          Amana
          AGDS902SS-P1131831NSS
          Range - Amana Range/Stove/Oven Model AGDS902SS-P1131831NSS (AGDS902SSP1131831NSS, AGDS902SS P1131831NSS) Parts
          Amana
          AGDS902SS-P1131833NSS
          Range - Amana Range/Stove/Oven Model AGDS902SS-P1131833NSS (AGDS902SSP1131833NSS, AGDS902SS P1131833NSS) Parts
          Amana
          AGDS902WW
          Range - Freestanding, Gas
          Amana
          AGDS902WW-P1131828NWW
          Range - Amana Range/Stove/Oven Model AGDS902WW-P1131828NWW (AGDS902WWP1131828NWW, AGDS902WW P1131828NWW) Parts
          Amana
          AGDS902WW-P1131831NWW
          Range - Amana Range/Stove/Oven Model AGDS902WW-P1131831NWW (AGDS902WWP1131831NWW, AGDS902WW P1131831NWW) Parts

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service