Whirlpool 675611 - Door Spring Assembly with Adjusting Hook | PartSelect.ca
Door Spring Assembly with Adjusting Hook – Part Number: 675611
( Grid squares measure 1x1 inch )
Door Spring Assembly with Adjusting Hook – Part Number: 675611 Door Spring Assembly with Adjusting Hook – Part Number: 675611 https://partselectca.azureedge.net/Schematics/Whirlpool/DODTJZBK.gif

Door Spring Assembly with Adjusting Hook

Your Price

CAD$42.49

PartSelect Number PS382742
Manufacturer Part Number 675611
Manufactured by Whirlpool

This kit includes spring, retainer and protective tip. It is recommended to replace both springs at the same time.

This part works with the following brands: Whirlpool, Kenmore, Roper.

This part works with the following products: Dishwasher.

This part fixes the following symptoms: Door latch failure

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Customer Repair Stories

Average Repair Rating: 4.2 / 5.0, 13 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ruthann from Auburn, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
675611
One of the door springs broke. These add a coutner balance to the door so it is easier to open and close
I have a Kenmore model that can either be totally installed under counter, left on casters or in my case installed permanently with the 'portable' covers still on. A model that is only for installation in a cabinet may be different.
Open door part way and flex the plastic hinge 'pins' on the kick plate out of the door itself. Once these are out you can close the door and lay the kick plate down towards you. This will expose a spring that is attached to pins on either side of the kick plate and held in place by a rubber cap. Remove the cap, pull the loop of the spring off the pin, and repeat for the other side. At this point you can remove the kick plate and set aside out of the way.
There is a second plate behind the kick plate held in place by four screws. Remove the screws with a Phillips head screw driver or a 1/4 inch wrench or socket, then remove the plate and set aside.
Now you have exposed the frame rails that somewhat hide the springs, one on each side. If you are lucky, like I was, only one is broken so you can use the other as a guide. Also the installation drawings that came with the part were very helpful. The information supplied by Kenmore in the parts list was no help at all.
Follow the 'assembly' found in the kit to assemble the 3 parts of the spring. A this time you may want to open the door halfway then close it and reopen a couple of times and observe how the tail of the door hinge moves, this will show you where the spring is attached. The spring is mostly hidden behind the frame rails but the two connection points are visible with the help of a flashlight. If one of the springs in still connected, observe the two connection points, one on the tail of the door hinge (top of spring) and the other in a series of slots in the frame rail.
With the door closed, hold the spring assembly in one hand (easier said than done) and hook the top of the assembly over the hook on the door hinge. Let it hang down in place and slip the lower part of the assembly into one of the slots. Again if one of the springs is still in place just use the same location as before. If both springs are missing, use one of th slots in the middle.
Only one of my springs were broken but I installed new ones on both sides as cheap insurance against doing this again in a few months.
Step by step appears a bit complicated but the whole thing only took about 10 minutes.
Good luck.
22 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Don from Christiansburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
675611
Broken Door Spring
I removed the lower panel and looked at the directions supplied with the spring. attached the new spring. replaced the panel which only involved four screws. about a thirty min. job.
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Eva from Northport, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
675611
Dishwasher door would hang open with no tension
My dishwasher is an under the counter mounted model. No need to pull it out or move it. I used a screwdriver to remove the casing on the bottom of dishwasher. I then removed another piece that was just behind this casing. When this was done I could see where the springs were on either side of machine right in the front, - easy access. I followed the directions that came with the part. Three simple pieces came in clear bag. You first put plastic red end onto end of long metal piece and put it through the spring. Hook it into place by catching one end of spring. I took notice of how broken springs were hanging in machine and then replaced the new spring. I hung one end of spring on the hook and then pushed other end with red plastic piece through to catch the notch. (You can adjust placement for door tension considering there are at least three notches.) Space was tight so I held onto free end of spring with needle nose pliers and pushed it through with my fingers to the notch. I almost called a repairman to do this for me. That would have been an expensive way out of an extremely easy repair. ANYONE can do this as long as they have finger dexterity. I am thrilled to have a perfectly functioning dishwasher door again. The parts were perfect and much cheaper than buying from Sears or elsewhere.
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Michael from Fremont, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
675611
Both door springs on the dishwasher door broke
The repair was very simple and covered completely in the instructions that came with the springs. However, I am writing this not so much to describe the repair but to give unsolicited praise to PartSelect. I pretty much only purchase online, so I spend a lot of time on web sites. This was probably the best shopping experience I have ever had (Google and Google Tool Bar were also involved). I found the site using Google, but then found my part in about one minute with the great diagrams. Checkout was incredibly easy and my parts arrived two days later and the door was fixed 30 minutes after that. I'm a customer for life!
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Ronda from Moore, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Parts Used:
WP2187172, 675611, WP2193353W
Leak under Refrig (cracked Water inlet Value)
I bought a refrigeator that was stored in a public storage area. When I initally connected the water source to the refrig, there was a big wter leak under the refrig. The repair was quite easy once you identify the part that is broken. Day 1 (Investigate the leak): I pulled out the refrig. I removed the screws (7) holding the bottom cardboard panel. Once done, I removed the screws (2) holding the inlet value in place. I pulled out the value about inches and inspected what was wrong. (There was a hairline crack in the body of the value caused by the water freezing when it was stored outdoors). I wrote down all the numbers off of the valve and then I ordered my parts online from PartsSelect (plug for company!!!). I also ordered a water filter, since it had cracked as well. I put everything back together in reverse order, and left the water turned off. Day 2 (3 days after ordering parts). Took apart the refrig again, just like Day 1. I read the instructions that came with the Water Inlet Valve and they were "exact". Disconnected the electrical connectors. I had the push-in fitting type of hose connector, so I simply pushed in (not pull!!!) the collet (colored collar around the opening) inward towards the valve and pulled the tubing (4) away from the valve. VOILA!!! Real easy! I compared the old valve and the new valve...yup, correct part! Now the installation was a breeze! I simply reversed the order. Pushed in all the hoses into the correct fittings, reconnected the electrical connectors, and reinstalled the valve to the refrig, and attached the water filter in the front of the refrig. I turned on the water source and checked for leaks. No surprises here!!! The connections held and there were no leaks! I reinstalled the cardboard backing and I pushed back the refrig in place.

Moral of my story: if you are going to store your refrigerator outdoors, drain all the water from the water and ice maker system!!!
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
grady from columbus, MS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
675611
door spring broken
removed the bottom panel 4 screws,then replaced the new springs. I bought two and left the other one inside the panel saved $80.00 servive call.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Phil from Ft Lauderdale, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
675611
1 spring broke
removed the 2 screws that hold in the washer, pulled it out, with the door shut, removed and replaced the remaining spring , then went to the other side and did the one that broke off. then I reinstalled the unit. simple !
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Claiborne from Atlanta, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
675611
Both Dishwasher door springs broken
Pulled out the DW and removed old spring parts. Used screw driver and pliers to respring
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Philip from Hialeah, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
675611
left door spring broken - door wouldn't stay up
Removed the two screws securing the dishwasher to the underside of countertop.
Pulled the washer out until the spring mechanism was visible. Vacuumed the area - it was filthy. Assembled the spring and adjusting hook. Took me 4 tries to get the spring into the proper tension slot. Having the other side intact helped in understanding how it worked. Used long nosed pliers to bring spring onto the door retaing plate slot after trying unsuccessfully with regular pliers.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Kyle from Jonesborough, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
675611
Door spring broke
It took longer to take the 2 screws out than it did to put spring on.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
1 Review
5
out of 5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Kenmore
19585
Dishwasher - Kenmore Dishwasher Model 19585 (1988) (19585(1988)) Parts
Kenmore
19985
Dishwasher - Kenmore Dishwasher Model 19985 (1988) (19985(1988)) Parts
Kenmore
6651560590
Dishwasher
Kenmore
6651560591
Dishwasher
Kenmore
6651560592
Dishwasher
Kenmore
6651569580
Dishwasher
Kenmore
6651570590
Dishwasher
Kenmore
6651570591
Dishwasher
Kenmore
6651570592
Dishwasher
Kenmore
6651570990
Dishwasher
Kenmore
6651570991
Dishwasher
Kenmore
6651570992
Dishwasher
Kenmore
6651576580
Dishwasher
Kenmore
6651576581
Dishwasher
Kenmore
6651577580
Dishwasher
Kenmore
6651578580
Dishwasher
Kenmore
6651578581
Dishwasher
Kenmore
6651578582
Dishwasher
Kenmore
6651578583
Dishwasher
Kenmore
6651580590
Dishwasher
Kenmore
6651580591
Dishwasher
Kenmore
6651580592
Dishwasher
Kenmore
6651586580
Dishwasher
Kenmore
6651586581
Dishwasher
Kenmore
6651587580
Dishwasher
Kenmore
6651587980
Dishwasher
Kenmore
6651587981
Dishwasher
Kenmore
6651587982
Dishwasher
Kenmore
6651587983
Dishwasher
Kenmore
6651588580
Dishwasher