Part Location Diagram of 154825001 Frigidaire Heating Element
See part F1 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Heating Element

★★★★★
★★★★★
7 Reviews
$103.07
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS3653449
Manufacturer Part Number 154825001
Manufactured by Frigidaire
Product Description

Heating Element Specifications

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher. NOTE: Brass nuts are NOT included. Must be ordered separately.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not drying dishes properly | Leaking | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Westinghouse.
Part# 154825001 replaces these:
AP5628696, 2308825, 154825001, 154482901, 154663801
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
5.0
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 7 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Heating element corroded, not heating
Removed bottom plate and heating element brass nuts. Disconnected heating element. Connected new one then replaced brass nuts. Put bottom plate back on. Very easy.
Other Parts Used:
Heating Element Brass Nut
  • Denise from Burnt Hills, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
36 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element went out
Removed the clamp holding it to the floor and
removed the c-clips holding element underneath
and put new one in. Hard part was figuring out
what was holding the element but since I still
had the schematic drawing we figured it out.
Saved a bunch on a repairman. After watching
my friend install the new element I could probably
do it myself next time.
Other Parts Used:
  • Jane from Port Charlotte, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
14 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the nut holding on the element would not tighten. leaked at the location where the nut was located
Removed the cover at the front bottom to gain access to the nuts holding on the element.
Turned off dishwasher breaker.
Removed the wires connected to the element.
With a 1/2" wrench, removed the element mounting screws.
Removed the bottom rack.
Removed the lower spray arm.
Removed the element from 2 clips.
Removed the element.
Put the new element in place.
Clipped it in.
Put new screws on and tightened up with a wrench. Not too much but enough to squash the washers to make a tight seal.
Replaced wires.
Replaced spray arm and bottom rack.
Turned on the breaker.
Ran it through a cycle to check for leaks.
Replaced bottom cover.
Other Parts Used:
Heating Element Brass Nut
  • Robert from JARRETTSVILLE, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Socket set, Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic had melted on the screw
Eventually broke off old heating element to get it out
Other Parts Used:
Heating Element Brass Nut
  • Eugene from DE KALB JCT, NY
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Socket set, Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating Element was corroded.
It took me about 30 minutes to do the repair - took my time and could’ve done it much faster.
Other Parts Used:
  • Christopher from EVERETT, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The heating element (ring) showed signs of wear
I followed the steps on YouTube.
Other Parts Used:
  • Leonard from N ROYALTON, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My heating element was cracked
Remover the cracked heating element with the new heating element.
Other Parts Used:
  • Jimmy from COMSTOCK PARK, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

7 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ted
December 31, 2017
Is there still a video instruction for replacing the heating element. Haven't gotten past separating clips.
For model number PLD4375RFC0
PartSelect logo
Hi Ted, Thank you for the question. Please see below for a link to a repair video. The appliance may not be the same but will have the same basic steps. Hope this helps! https://www.youtube.com/watch?v=QYYmKvfj6Xk

8 people found this helpful.

Was this helpful?
Thank you for voting!
John
March 7, 2019
We discovered a leak underneath where the heating element bolts into the bottom. Will replacing the heating element solve this problem?
For model number FDB2810LDC1
PartSelect logo
Hello John, Thank you for the question. I suggest checking the Heating Element Brass Nut, PartSelect Number PS1524878. The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. Thank you for your inquiry, good luck with this repair!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Tom
April 10, 2019
Does this model dishwasher have a drying fan? Machine seems to be washing with hot water but does not dry the dishes at the end of the cycle. Would changing the heating element solve this problem?
For model number GLD4050RHS1
PartSelect logo
Hi Tom, Thank you for your question. If the dryer is not drying dishes, the heating element fixes the issue the majority of the time, but you should also check the high limit thermostat as well. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
JORGE
February 18, 2020
Hi my dishwasher it's neither drying nor cleaning well the dishes, i checked and it's not heating the water, i change the thermistor and the highlimit thermostat seems to be ok, it has continuity, so the heating element which if i feed it with 110 volts get hot, but when i check the continuity it measures 0, the needle goes all the way.What else can i check? thanks
For model number GLD2250RDC3
PartSelect logo
Hello Jorge, thank you for your question. If the heater and the thermostat have been tested and have continuity the issue could be with the main board under the unit which controls the functions, which is PartSelect Number: PS2342475. I hope this helps.

Was this helpful?
Thank you for voting!
Stephen
December 13, 2022
I can't seem to get one of the spade connectors off my existing element. The dishwasher was leaking around one of the leads so the connector might be corroded. Is there a clip I'm missing or should it just pull right off?
For model number FGHD2465NF1A
PartSelect logo
Hi Stephen, Thank you for your question. For this repair you will need to use a Phillips head screwdriver and a ½ inch wrench. Before beginning any repair, please turn the water off and either unplug the appliance or turn the circuit breaker off. To begin the repair, open the door and remove the lower dishrack. Then remove the lower spray arm by pulling it straight up. Use the screwdriver to unthread the screws securing the dishwasher to the counter and then pull the dishwasher out half-way. Then remove the wires from the heater terminals. Take note of how they are positioned before removing them. Then, with the half inch wrench, unscrew the mounting nuts securing the terminals. Then pull out the old heater terminals and release the heater terminals from the retaining clips. Install the new heater element terminals into the openings. There should be 2 white dots on the heating element. Where the white dots are positioned is where they slide into to the retaining clips. Once the element has been placed into the clips, push the terminals down and reinstall and tighten the mounting nuts with the wrench. Place the wires back onto the terminals and slide the dishwasher back into the counter. Secure the dishwasher to the counter with the 2 screws. Reinstall the lower spray arm and push it down to lock it in. Place the lower rack back into the dishwasher and restore power and water to the dishwasher. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Brenda
January 29, 2019
Is it possible to purchase only the brass nuts or do we have to purchase the entire heating element?
For model number GLD2250RDQ3
PartSelect logo
Hello Brenda, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS1524878. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
Gladys
February 27, 2019
What is the wattage and length?
PartSelect logo
Hi Gladys, thank you for your question. Unfortunately we do not have the wattage information. However this part is photographed on a 1 inch grid background to get an approximate size of the part. This part is 16" wide. Good luck with your repair.

Was this helpful?
Thank you for voting!
  • 1
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3653449
Manufacturer Part Number: 154825001
Brand
Model Number
Description
Frigidaire
004621710A
Dishwasher - Dishwasher
Frigidaire
004621711A
Dishwasher - Dishwasher
Kenmore
58714012407A
Dishwasher - DISHWASHER
Kenmore
58714012408A
Dishwasher - DISHWASHER
Kenmore
58714012409B
Dishwasher - DISHWASHER
Kenmore
58714012410B
Dishwasher - DISHWASHER
Kenmore
58714012411B
Dishwasher - DISHWASHER
Kenmore
58714012412B
Dishwasher - DISHWASHER
Kenmore
58714012413B
Dishwasher - DISHWASHER
Kenmore
58714012414B
Dishwasher - DISHWASHER
Kenmore
58714012416B
Dishwasher - Dishwasher
Kenmore
58714013408A
Dishwasher - DISHWASHER
Kenmore
58714013409A
Dishwasher - DISHWASHER
Kenmore
58714013410B
Dishwasher - DISHWASHER
Kenmore
58714013411B
Dishwasher - DISHWASHER
Kenmore
58714013412B
Dishwasher - DISHWASHER
Kenmore
58714013413B
Dishwasher - DISHWASHER
Kenmore
58714013414B
Dishwasher - DISHWASHER
Kenmore
58714013415B
Dishwasher - DISHWASHER
Kenmore
58714013416B
Dishwasher - Dishwasher
Kenmore
58714014407A
Dishwasher - DISHWASHER
Kenmore
58714014408A
Dishwasher - DISHWASHER
Kenmore
58714014409B
Dishwasher - DISHWASHER
Kenmore
58714014410B
Dishwasher - DISHWASHER
Kenmore
58714014411B
Dishwasher - DISHWASHER
Kenmore
58714014412B
Dishwasher - DISHWASHER
Kenmore
58714014413B
Dishwasher - DISHWASHER
Kenmore
58714019407A
Dishwasher - DISHWASHER
Kenmore
58714019408A
Dishwasher - DISHWASHER
Kenmore
58714019409B
Dishwasher - DISHWASHER
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service