Average Repair Rating: 4.1 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My original gaskets for the fridge and freezer doors seemed to have lost their magnetic hold
I opened the freezer door and peeled out the freezer gasket, inserted the new gasket, and closed the door. I repeated this same process for each of the French doors on the refrigerator. This was very easy to do. The only issue is the replacement gaskets don't seem to have any better stick or magnetic hold than the original gaskets, so I'm not sure the repair will improve the energy efficiency / performance of the appliance.
Frost on the edges of the freezer and all around the freezer door
I was getting small sections of ice and a snow like build - up around the freezer door. I thought that the door was not sealing tight enough and that the cold air was leaking out. The original door gasket appeared to not have any flexibility anymore and was getting hard. I ordered a new door gasket from PartsSelect. When the gasket arrived it was in a large enough box and that saved me some time as the gasket was not "crushed" to the point where there were a lot of kinks in the gasket. I used a hair dryer on low to warm the gasket and stretch it out some. The freezer door required me loosening four small screws and lifting the door off. I placed the door on an old blanket so not to scratch the finish. It was easy to remove the old gasket and after doing so I cleaned the track where the new gasket was to go with isopropyl alcohol, Once cleaned, I placed the gasket over the channel in the door where the old gasket had been and started installing the new gasket. I started at the corners and you can feel the gasket snap into place. Once the four corners were done I started at the top and installed the gasket the rest of the way. You can feel it snap into place. as you work your way around the gasket channel. Once the gasket was in place I placed the door on the four small grooves where the door had been and tightened up the screws. I made sure that no white from the inside of the freezer door was showing after the gasket was in place and that the gasket had some "spring" to it. The door was back on, the gasket was tight and it appeared to be a good seal. Around 12 hours later I checked the freezer and there was no more ice or "snow" on the edges of the freezer. While the gasket was not inexpensive, it is a genuine OEM piece, and the gasket is a lot cheaper than a new refrigerator! I hope this was helpful...
Other Parts Used:
Robert from EVERETT, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frost on the top edge of the freezer drawer
Put the gasket in the dryer for 15 minutes to warm it up. It fit much better after it was warm.
Other Parts Used:
Lee Ann from College Station, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer gasket not sealing.
Watched video on line.
Other Parts Used:
Margie from DERBY, KS
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing leaking freezer door gasket
When the gasket is delivered it will be folded. You will need to unfold it and leave it on a flat surface for several days. Keep it as square as possible, and heat the kinked portions with a hair dryer on high heat and slow fan while molding kinked portions with your hands for 30 to 60 seconds at a time. Do that 2-3 times per day. When it looks 90% uniform with the non kinked portions, you can install it. Installation takes less than 10 minutes. Clean the metal edge of the freezer well. I recommend taking the door annd frame off (This is remarkably easy. THe door and frame pretty much lifts up and out after you hold the rail clips inward) because the lower edge is so close to the floor. The just pulll off the old gasket. There are no screws or clips. Starting in any corner, press new gasket into place. Go around the perimeter several times to make sure it is pushed in fully and evenly. Then reinstall the door and frame.
Other Parts Used:
Joseph from OCEAN SPRINGS, MS
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
14 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Toby Strauss
October 28, 2017
Can i check this is the correct freezer seal for the above model number. The dimensions are are approx 34 1/4 inches by 22 3/4 inches (rectangular)
For model number Maytag G32026PELB Door Seal
Hi Toby,
Thank you for your inquiry. Yes, this is the correct freezer door gasket for your refrigerator. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Gene
March 13, 2020
Why does the frezzer gasket have a u or a dip in the gasket will it fit my frezzer with model # mff2558keb bottom frezzer thanks you
For model number MFF2558KEB
Hello Gene,
Thank you for your question. Yes this freezer gasket will fit your model, the dip is just for show in the picture, the actual gasket is rubber and will be fit on your door as a rectangle. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Price
June 21, 2022
Will this fit Maytag model MFC2061KES6? Thanks very much.
For model number MFC2061KES6
Hello Price, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3651266. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
January 20, 2018
Does this gasket fit my model
For model number GX5FHTXVBO3 Whirlpool
Hello Michael, Thank you for your inquiry. Yes, we do show that this part will fit your model. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Donna
August 5, 2018
Will this seal fit this model # mff2558veb? I also need the 2 french doors seals, do you h ave them for my model# also?
For model number MFF2558VEB
Hi Donna, Thank you for your question. Yes, this part is the correct gasket for your freezer door. I have linked the gasket for your other doors down below. Good luck with your repair.
Does part number ps3651266 fit a KitchenAid model kfc022evbl2 ?
For model number KFCO22EVBL2
Hello Kenny, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS3651266. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jennifer
July 4, 2019
Gasket, part number PS3651266, does not look like it fits my freezer door. My door does not have the u shape part of the gasket. It is a rectangle. Serial number 10178347CP. Thanks.
For model number ARB2557CB
Hi Jennifer,
Thank you for your question. This would be the correct gasket for your appliance. The gasket is not completely folded out in the photograph, but it is the correct part for your appliance. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Leo
July 22, 2019
Hello, does it fit with freezer door of Amana's arb8057csr ? Is cad including tax ? Thank you.
For model number Amana
Hello Leo, Thank you for the question. Yes, this is the freezer door gasket for the model number provided. Since tax is different for ever province the tax is calculated during the check out when you fill in the address information. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nancy
September 30, 2019
I have frost build up on the bottom of the freezer unit.
For model number KBFS20ETSS01
Good Day Nancy. Thank you for your question in regards to your unit (Model Number KBFS20ETSS01). Frost inside your freezer can be caused by moisture coming into contact with the coils inside the appliance and freezing. Is there any damage to the gasket that is used to seal the door shut? Best Regards.
Was this helpful?
Thank you for voting!
Elaine
December 27, 2019
What are the part numbers for the gaskets for two french doors and the lower freezer door?Do they come in white?
thank you!
For model number GX5SHDXTQ00
Hi Elaine, sadly the freezer door gasket is not available in white. They are available as part numbers PS3651266 and french door gaskets PS12723959 and white PS11759516. Thank you for your question and good luck with your repair!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3651266
Manufacturer Part Number: W10436252