Bottom Pan Cover
$112.87
Special Order
PartSelect Number
PS3650657
Manufacturer Part Number
WR32X10885
Manufactured by
GE
Product Description
Bottom Pan Cover Specifications
Also known as Chill Cover.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WR32X10885 replaces these:
AP5620049, 2304619, WR32X10885, WR04X10084, WR04X10094, WR17X10915, WR31X10015, WR31X10028, WR31X10029, WR31X10030, WR31X10031, WR32X10146, WR32X10153, WR4X10084, WR4X10094
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
meat drawer broke
the replacement part did not have the 3 screw holes needed to 100% replace the part that broke. however, i realized that the piece that fastens to these 3 screws is the slider cover piece (i dont know its name) that has the rubber gasket was sticking every time i opened the drawer and this was what caused the OEM part to break. anyone who has a GE profile with the meat compartment must know what i am talking about - it sticks and is a bit clunky to open (until the pressure breaks the pin holding the gasket as in my case).
i simply did not place that piece back when i put the replacement part in, and now it slides much more easily. the downside is slightly less seal for the meat compartment, but to me that isnt very important because that compartment does not need to be isolated from the rest of the fridge to do its job.
i simply did not place that piece back when i put the replacement part in, and now it slides much more easily. the downside is slightly less seal for the meat compartment, but to me that isnt very important because that compartment does not need to be isolated from the rest of the fridge to do its job.
Other Parts Used:
-
david from penn valley, PA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
9 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original part broke (weak design)
replacement part was not identical to the original. Mounting screw sockets did not exist on replacement part. I still used the new part but it is held in place by gravity (no screws). New part works but must be treated gently or will break like the original or fall out of place. Part diagrams online were not adequately clear. It would have been good if photos existed of the replacement from assorted angles, and I would have seen the lack of mounting screw sockets.
Other Parts Used:
-
carlos from freeport, NY
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
4 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Yes
-
fabio from MIAMI, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maurice
July 25, 2019
Does glass fit inside of the chill cover and what is that part number
For model number GSS25WSTBSS
Hello Maurice, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS300607 for the glass that sits in the cover that goes over the very bottom drawer. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Carmen
October 11, 2021
I m looking for the glass that fits into Part WR32X10885 for GE Refrigerator Model GSS25IYNRHS.
For model number GSS25IYNRHS
Hello Carmen, thank you for your question. We have researched the model you have provided, and we would suggest the COVER PAN GLASS, part number PS300607. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3650657
Manufacturer Part Number: WR32X10885
Manufacturer Part Number: WR32X10885
Brand
Model Number
Description