This surface burner head is for ranges.
Surface burner head distributes the gas through holes or slots to create an even flame across the cooking area.
Shut off the gas supply and unplug the range before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
General Electric.
Part# WB16K10079 replaces these:
AP5617282
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
5.0
Filter By Rating:
5 Stars
7
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Emily W - January 4, 2024
Verified Purchase
Good clear instructions made the repair fast and easy. Thank you.
The part was as described and that particular burner is back in working order.
★★★★★
★★★★★
Leonard B - December 3, 2023
Verified Purchase
quick and easy
figured out I needed and new burner because it got warped a bit and too much air was getting in. Made a lot of noise. Came here to order new burner and and it was nice and easy and arrived quickly. WIFE is happy now.
★★★★★
★★★★★
Vahid L - November 12, 2023
Verified Purchase
Great part
The part was in great condition Thanks
★★★★★
★★★★★
Donald S - May 24, 2023
Verified Purchase
Good deal.
Arrived quickly exactly as ordered. Works perfectly.
★★★★★
★★★★★
Ellen P - October 29, 2022
Verified Purchase
Easy to replace works perfecty
Part arrives quickly was easy to instal -works as it should
★★★★★
★★★★★
JEANETTE R - May 7, 2022
Verified Purchase
Easy repair and part worked fine!
Easy fix!
★★★★★
★★★★★
Manjit S - October 30, 2019
Verified Purchase
Worked as expected
This part was exactly required. It came new , and was easy to replace. It was a good experience to work with your company . Good job and keep it up .
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ed
January 3, 2018
My burner is warped. I've had the stove for 4 years. It burns propane. Is this normal?
For model number C2S985SET3SS
Hi Ed, Thank you for the question. No, I would not say it was normal for the burner to be warped. I suggest having it replaced. The burner may have had a defect when it was made and caused it to warp. Hope this helps!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
January 15, 2018
Does the 3r burner assembly include the aluminum base with gas ports and the cast iron ring that covers it (not the center cap)?
For model number PGB935SET1SS
Hi Robert, Thank you for the question. The 3R Burner includes everything you see in the picture, The aluminum base and the cast iron ring. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
David
November 17, 2019
Does part wb16k10079 include all that is required to replace the right front burner other than the small flat disc on top of the unit? The main unit is distorted and bubbled so that the unit does not fit on the base easily and the Flame is uneven, noisy and yellow. All other burners work well.
For model number CC2S985SET1SS
Hi David, sadly no, you would still need outer burner cap PS3503823. Thank you for your question and good luck with your repair!
The 3r burner asm (part #157 on your diagram) on my stove top burns only 3/4 of the way. Can it be clogged or is part of the element burnt out. Cannot take the 3 screws off also to check inside.
For model number PGB935SET3SS
Hi Raymond,
Thank you for your question. If all of your other burners are fine then it is likely you will have to replace this burner. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Manjit
October 15, 2019
My stove's big 3r burner assembly is bent from one side narrowing the gap on one side and causing half Flame. I am looking at the parts #s and probably it is number 157 in catalogue,and part# is ps3650622 for $129. I am seeing the picture of the part from bottom side (which looks similar to mine) but I don't see the top view. I just wanted to make sure that I am placing the order for the right thing. Can someone call me or email me to make sure before I place the order. Thanks
For model number PCGB940SEJ1SS
Hello Manjit, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3650622. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Peter
October 31, 2019
Is this the full replacement for the front right power burner?
For model number CGS985SETASS
Hello Peter, Thank you for the question. Yes, the PartSelect Number PS3650622 is the Right Front Burner. It comes as seen in the picture. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joseph
June 6, 2019
The 3r burner will not light sometimes. I am using propane and the electric ignition is working but the burner will not light all of the time. Should i replace the burner?
For model number CGS985SET2SS
Hello Joseph, Thank you for the question. If you can not light the burner with a match, you may need the burner valve, PartSelect Number PS2353520 as it is not releasing gas to the burner. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
August 28, 2019
The burner in the front right corner lights fine when it is cold, but when you shut it off and then try to relight it, it sounds like it is sparking the rear burner and it will not light without the use of a barbecue lighter. Also, this burner is very warped now. Is this a burner issue or an electronic igniter issue?
For model number CCGS985SET1SS
Hi Mark,
Thank you for your question. If the burner is not igniting correctly and if you try to relight it and it sounds like one of the other burners is trying to light, the burners may be either wet or dirty, the electrode is not seated properly, or the burner head and cap are not matched up properly. If there is moisture in the burner heads, the burner will not ignite. Wipe up any excess moisture and allow the area to dry before using it again. If the electrode is not seated properly, press down on the electrode using and twist in a clockwise motion until the electrode sits flush with the cooktop and also make sure that each burner head is placed in the correct position on the cooktop. Also make sure the burner cap matches its burner head. The burner cap will lay flat and fit securely if put on correctly. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Sergio
November 15, 2019
The Flame is not consistent all the way around the burner. Only have Flame on 2/3 of the burner . Do I need to replace the aluminum burner. Thanks sergio
For model number CCGS990SET1SS
Hi Serigo, this can be caused by a variety of parts. It could be a bad ignitor PS4704151, flame hole on burner head being clogged or the burner head being in the wrong position. Thank you for your question and good luck with your repair!
Which burner cap works with this part-partselect number ps3650622 For right front burner. It looks like #153 on the diagram (part #: ps3503824)
For model number C2S985SET5SS
Hello Richard, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for comes in two parts. PartSelect Number PS3503824 and PS3503823. Thank you for your inquiry, good luck with this repair!
