Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Marco L - May 22, 2020
Verified Purchase
Very easy repair!
This is an identical part to the one I had. Works just like new!
★★★★★
★★★★★
Edward F - March 20, 2019
Verified Purchase
was the part I ordered
took a bit long to get to me but worked as described for looking oven door for self cleaning.
★★★★★
★★★★★
John W - March 19, 2019
Verified Purchase
Oven light switch
Part came fast. Installed myself. Working great.
★★★★★
★★★★★
Martine M - February 28, 2019
Verified Purchase
Parfait
C'était le morceaux qu'il manquait pour refaire fonctionner mon four. C'est parfait, il est comme neuf et nous venons d'économiser l'achat d'un nouveau four. Merci
★★★★★
★★★★★
Mike B - November 28, 2018
Verified Purchase
Oven light
Oven switch arrived on time and was literally a “snap” to install.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven Door Light Switches Wrecked by Heat from Oven
Pull old switches out with pliers and replugged new switches. On main oven, plug casing was melted (wife left broiler on with oven door closed) so had to break apart old casing and individually plug the the wires into new switch and amazingly, it worked! Just gotta keep the door open when broiling.............
Other Parts Used:
Gregory from Croton-on-Hudson, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
12 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
range would not recognize the door wasn't shut
I was required to remove the control panel to access the plug as it had been broken and the switch had been shoved into the unit . It would have been extremely simple if the plug had remained on the outside surface My son can now clean his dirty oven
Other Parts Used:
Anne from Portland, OR
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door light switch was stuck
Pulled out stove, took side panel off on switch side of oven, unplugged old switch, pulled the old switch out the front of the oven, put in new switch and plugged it in. Then put oven back together and pushed it back into space. (Make sure to turn oven off at breaker box before you make repair) you could easily get shocked if you don’t.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
November 11, 2019
I need to replace the door switch on the feb374chsb wall oven. What's the accepted disassembly procedure to access and remove the switch? And alternately, can it be removed successfully from the front, agreeing that will probably have to be ruined or mangled/damaged in the process.... but why should i care if it is going to be replaced?
For model number FEB374CHSB
Good Day Bill. Thank you for your question in regards to your unit (Model Number FEB374CHSB). Here is what we can advise you on when it comes to the Door Switch: The door lock switch, or simply door switch, is used in ranges and ovens. The switch activates signals to the oven control board about the state of the door lock. If the light in the oven is not turning on or off, or the self-cleaning option is not working, it is best to replace the switch to solve your issues. The tools needed for this installation project are a flat-head screwdriver, Phillips-head screwdriver, and pliers. To repair, first remove the screws from upper rear access panel, then open oven door to disconnect the door switch wire connector. Next, remove switch assembly through the access hole and unhook the old hook from the actuator rod. Now you can install the new switch by hooking it on to the rod and back into place. Refer to the manual provided by the manufacturer for further installation instructions and guidance. For further technical information we would recommend reaching out to the manufacturer at 800-374-4432. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
