Frigidaire 318255006 - Bake Element | PartSelect.ca
Bake Element – Part Number: 318255006
Bake Element – Part Number: 318255006 Bake Element – Part Number: 318255006 https://partselectca.azureedge.net/Schematics/Frigidaire/27R58OZI.gif

Bake Element

12 Reviews

Your Price

CAD$126.22

PartSelect Number PS3633414
Manufacturer Part Number 318255006
Manufactured by Frigidaire

This bake element is found on the bottom of the oven.

This part works with the following brands: Frigidaire, Kenmore, Gibson, Westinghouse, Crosley, Tappan.

This part works with the following products: Range, Wall Oven.

This part fixes the following symptoms: Little to no heat when baking | Element will not heat | Oven not heating evenly | Will Not Start

Videos For installing this part.

Questions & Answers
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 4.3 / 5.0, 17 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Van from Sanford, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
318255006
oven element broken
The repair was simple; first I removed the 2 screws from the old element and disconnected the wires and then I inserted the new element reconnected the wires and replaced the screws . The repair was easy and took less that 15 min. The oven works as good as new and I saved alot of money by doing it myself.
144 of 154 people found this instruction helpful.
Was this instruction helpful to you?
Michael from Pleasant View, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
318255006
lower element burned out
PartsSelect serivce was AMAZING - I ordered online on Sunday afternoon, and the part arrived Tuesday with standard shipping! First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires from the old element, then replaced with new. WARNING - you MUST kill the breaker, because the element is "hot" even when it's off.
47 of 49 people found this instruction helpful.
Was this instruction helpful to you?
John from Albrightsville, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
318255006
Bake Element burned out
Took out the bad element and replaced it with the new element in less than 5 minutes. Simple Stuff with the right part. Thanks Parts Select!
17 of 17 people found this instruction helpful.
Was this instruction helpful to you?
susan from bainbridge Island, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
318255006
I had a fire in the oven and the unit had split apart.
I removed the two screws and then used pliers to pry apart the wiring. I unplugged the connectors and removed the element. The new unit arrived in three days and I plugged it in, replaced the screws and turned the oven on and made a pie! Very Satisfying and easier then I ever thought it would be. We figured we saved $200.00. The service place where we live charges $125.00 to come out and assess and then parts and service on top of that.
17 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Sandy from Baileys Harbor, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
318255006
Replaced Bake Element
Based on previous responses we anticipated this repair to be easy, however, it was a little more challenging than expected. The method of repair was easy enough, just would have been better if there had been more wire to pull out to connect to the new bake element. It took two of us to fish for the wires back inside the stove with a needle-nose pliers after removing the element. One had to hold the wire with the pliers while it took the other to attach it to the new element with second pair of pliers as there was no room for using fingers. Retrieving and attaching the second wire to the element was even more challenging because now the half-attached element was in the way. Disappointed and not sure why the element burned out in the first place on a 4year old appliance.
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Douglas from Newark, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
318255006
my mother blew up the old element. she wanted to tie it for 8 minutes but set it to 800 deg. f. lol:)
searched on the computer for the name and part number that was damaged, found that it was the bake element so i ordered it with part select.com. when it arriver three days later (as expected) i disconnected the gas and electric to the range and simply removed the old element with a phillips screw driver. installed the new element, hooked the gas and electric back up and began cooking again...

thanks partselect..
7 of 13 people found this instruction helpful.
Was this instruction helpful to you?
John from Pearland, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
318255006
Element had burned out
Extremely easy. Two screws and electric connection that had easy pop on-off connection.
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Stephen from ROCHESTER, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
318255006
Bake element stopped working
1. SHUT OFF POWER TO YOUR RANGE! (I flipped the circuit breaker at the box to do this. To be totally safe, you can shut off the power to the whole house.) 2. Remove the oven racks. 3. Undo the two screws (save for step 8) holding the bake element in place. (This took some doing for me, as the screws did not want to come out easily. Maybe use some penetrating oil and be careful not to strip the screws.) 4. Gently pull the bake element toward you, exposing the contacts and wires. 5. Remove the wires from the old element's contacts. (Remember which contact 6. Attach the wires to the new element's contacts. 7. CAREFULLY push the wires back into the wall of the oven. (Pay attention to the insulation. Make sure that some insulation is near the wall.) 8. Fasten element to wall of oven with screws you saved from step 2.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Rodney from Orange Park, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
318255006
Electric Oven - No Heat in the bake Mode.
Broil worked on the stove, however in bake mode, the oven did not make temperature. Turned off the stove, unscrewed and inspected coil. I noted there was a section of the coil that had a "corroded" appearance. (it was evidence of the coil being burned out). Checked with a ($9.00) voltmeter, showed infinite resistance. Found the original envelop for the stove taped to the back of the oven from 1973. It has wiring diagram with schematic and noted the coil was 3000 W, 19 ohms.

Bottom Line found comparable replacement online and tested resistance, measure dimensions of the old coil, matched with Watt rating, replaced, tested installed and works great, Oven has been in use for a couple weeks now. New stove would have been around $500.00. Not to mention some remodel work, as the house is old and stove is a built in.

Coil was $60.00 and should buy the time I need until I remodel the entire kitchen.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Sylvia from Escondido, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
318255006
Bake element burned out
Took out the bad element and replaced it with the new element in less than 5 minutes, worked perfect, thanks
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
12 Reviews
4.6
out of 5
Filter By Rating:
  • 5 Stars
    9
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Frigidaire
74403
Range - DUAL FUEL RANGE
Kenmore
790.46814991
Range - Kenmore Range/Stove/Oven Model 790.46814991 (79046814991, 790 46814991) Parts
Kenmore
790.46819991
Range - Kenmore Range/Stove/Oven Model 790.46819991 (79046819991, 790 46819991) Parts
Kenmore
790.76839100
Range - Kenmore Range/Stove/Oven Model 790.76839100 (79076839100, 790 76839100) Parts
Kenmore
790.99613703
Range - Kenmore Range/Stove/Oven Model 790.99613703 (79099613703, 790 99613703) Parts
Kenmore
79045062400
Range
Kenmore
79045062401
Range
Kenmore
79045069400
Range
Kenmore
79045072400
Wall Oven
Kenmore
79045074401
Wall Oven
Kenmore
79045079401
Wall Oven
Kenmore
79045252400
Range
Kenmore
79045254400
Range
Kenmore
79045262500
Range
Kenmore
79045262501
Range
Kenmore
79045262502
Range
Kenmore
79045262503
Range
Kenmore
79045662100
Range
Kenmore
79045662103
Range
Kenmore
79045669102
Range
Kenmore
79045669103
Range
Kenmore
79045669104
Range
Kenmore
79045702300
Range
Kenmore
79045704300
Range
Kenmore
79045709300
Range
Kenmore
79045712100
Range
Kenmore
79045712102
Range
Kenmore
79045712103
Range
Kenmore
79045714100
Range
Kenmore
79045714102
Range