This ice maker assembly is for refrigerators. This Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
LG, Kenmore.
Part# AEQ72909603 replaces these:
AP5325806
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fabian P - March 10, 2023
Verified Purchase
Fast delivery and easy repair!
Super fast shipping and delivery of the part. 2 screws budda bing budda boom, done! Part fit perfect and performs great!
★★★★★
★★★★★
Shane C - September 23, 2022
Verified Purchase
Perfect fit and support, as usual
This didn’t appear to be the correct part in the website but was exactly what I needed. Follow the video and bobs yer uncle. Save a poop ton of money, was a hero to wife and kids, am now the IceMan!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Icemaker flooded the storage container box for cubes. Then froze solid.
Ordered the Part after looking at the choices shown, once I inspected the unit. I then knew by looks what would fit. THEN (important) went on Utube asking for video instructions. They had it on the computer and it was just too easy. What took the longest was the removable of the frozen food items and the drawers in the Bottom Freezer section. Perfect product, perfect instructions, perfect job and worked perfectly!
Fridge only 18 months old too!
Handyman wanted $457.00 to do the job! HA.
Other Parts Used:
Irvin from Anaheim, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
9 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
needed to replace broken ice maker
Take out 2 screws and unplug unit before removing. Plug-in new unit and screw in 2 screws. That's it.
Other Parts Used:
John from WEST ROCKPORT, ME
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker quit working
Plug in the replacement ice maker to the socket in the frig, fit the back of the new ice maker into the slot to the rear, attach with 2 screws saved from removing old ice maker. Simple.
Other Parts Used:
Richard from MINNEAPOLIS, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
25 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lance
November 7, 2017
Our ice maker hasn't worked for a few days. I got a little anxious after noticing the arm was up and pulled it down before working the ice loose or thawing out the restriction. Well.. i broke the arm because it's down and won't retract/stay up. our town's water is kind of bad(we don't drink it), is the water quality problem contributing to the problem or is it a engineering problem? what parts would you recommend replacing? thanks for your time.
For model number LFC25765SB
Hi Lance, Thank you for the question. As long as the water is filtered before entering the appliance this shouldn't be an issue.The parts to the ice maker are not sold sepratly so the ice maker will need to be replaced, PartSelect Number: PS3617225. Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
February 14, 2020
Hello. On this LG refrigerator, i'm having problems with the ice maker. I found some cubes of ice in a block of ice in the bin. So i assumed water was leaking into the bin some how. I thawed the bin and then reset the ice maker with the reset button. It went through its cycle and i heard it fill with water. No water overflowed or leaked through the tray. In about 10 minutes i heard it filling with water again. I opened the freezer drawer to find the ice maker continuously filling with water and dumping the water over and over again. I just cut the water and ice maker off and started doing research which lead me here. Any ideas? Thanks in advance for any help you can provide.
For model number ldc24370st
Hello Chris, thank you for your question. The water inlet valve requires a minimum of 20 psi to shut off properly. If the water pressure is too low, the valve may not close fully once the power is shut off. As a result, the valve will leak water into the ice maker and cause the ice maker to overflow. Check the water pressure to determine if it is at least 20 psi. If the water pressure is sufficient, the water inlet valve is likely defective. The valve may not shut off all the way or may be stuck open, causing water to leak through the valve. If the water pressure is sufficient, but the ice maker is still overflowing, replace the water inlet valve.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Bruce
April 22, 2019
The ice-maker in the freezer of our refrigerator/freezer has stopped putting out ice. The obvious diagnosis would seem to be that it has gone bad and needs replaced, right?
For model number LFC22770ST
Hello Bruce, Thank you for the question. It could be the ice maker not getting water to make ice as well. Try to pour a glass of water into the ice mold to see if the ice maker makes ice as normal. If so, it might be a water inlet valve issue not sending water to the ice maker. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Fred
January 13, 2020
I have water leaking from around the tube where it enters the back of the freezer. Can i seal with food grade silicone around the tube or do i have bigger problems?
For model number 79576203901
Hello Fred and thank you for writing.
You can seal it, however this certainly sounds like it could be a faulty water inlet valve PS3533114 (and by sealing the tube it will cause other issues as the water needs to go somewhere), you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime if you require further assistance.
ice maker shut off arm is stuck in up position any suggestions .
For model number 79571312310
Hi Harry,
Thank you for contacting us. The ice maker arm should freely move up and down. If it is stuck in the up position, try pressing down on it to see if it will move. If it does not go down and there is ice in the ice maker, defrosting the refrigerator may help. Also, make sure the switch on the ice maker is in the on position. If the switch is in the on position and arm will not go down, the ice maker has a mechanical issue and will need to be replaced. We hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
May 29, 2019
What does the test reset button do?
Hello Ron, Thank you for the question. It will reset the ice maker cycle and start the cycle over to make ice. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
John
September 26, 2019
I have the model Kenmore listed above with bottom freezer. The ice maker will cycle then fill with water but at times the water will not shut off and over flows the ice maker mold tray. Is this a sensor or does the complete ice maker need to be replaced?
For model number 795.71319.312
Hi John, it is likely the water inlet valve or entire ice maker assembly needs to be replaced. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Fabian
January 16, 2023
A tray of ice has frozen over in our ice maker. It cycles, but doesn't seem to dump the ice. So, once it cycles, the water runs and flows over the cube tray and into the ice holder tray. I used a hair dryer to melt away the ice jam, and it fell neatly out of the tray... but, it happened again a day later. Upon further inspection, there appears to be a hard water build up in the cube tray itself (it seems to be restricting the cubes of ice from dropping). Can I remove the ice maker and clean out the hard water deposit in the tray (using vinegar and water). If so, is it as easy as removing the 3 screws that are visible and undoing the electrical clip?
For model number 79571323411
Hello Fabian, thank you for the question. There are normally two screws holding the icemaker in position. There is only one harness that connects the icemaker to the unit electrically. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Wendy
November 13, 2018
Will this icemaker work if the refrigerator has never had one before? Also, this is a bottom freezer model. Will it still fit?
For model number 795.71302.012
Hi Wendy,
Thank you for your question. This ice maker is listed under your model number, so it is designed to work with your refrigerator even though it did not have one before. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joseph
August 22, 2019
The ice maker produces ice but now the freezer area (where the maker is located) is frosting and icing over. It's as if the water, for making the ice cubes, is spraying all over. What is the solution?
For model number 79571304012
Hello Joseph, Thank you for the question. I suggest checking the water line that fills the ice maker to make sure it is placed properly and not out of enlightenment causing the spray. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3617225
Manufacturer Part Number: AEQ72909603
