This genuine OEM filter guide keeps garments from exhaust air duct and lint screen inside the dryer. The filter guide is made of high quality plastic and is approximately 15 inches long by 3 inches wide. If your filter guide is faulty, or damaged clothes can get stuck in the lint screen which can cause damage to your garments and to the dryer unit itself. NOTE: Flap (PS3634953) and Spring (PS11706080) are sold separately.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
LG, Kenmore.
Part# 4974EL1002B replaces these:
AP5211577
Customer Repair Stories
Average Repair Rating: 1.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Doesn’t fit
The parts do not fit my dryer. The guide cover is about 1/4 in off. Screws don’t align with the holes. I can get one screw in but than Carly get the other one aligned. Lots of wasted time and frustration.
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sally
October 28, 2019
Does this part come with the spring? If not how can I order the spring?
For model number DLE1501W
Hello Sally, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11706080. Hope this helps!
I need to replace part 4974el1002b (lint screen cover). I removed the lint screen grille (diagram k330, has 6 screws), but still could not see how to take out the screen cover i need to replace. Doesn't appear to have any screws or connections. Do i just yank or pry it out ? (have had bad luck doing similar actions before with other products).
For model number LG DLEX5101W
Hi John,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the filter guide. You will find the video under part number PS2039494. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ihab
February 3, 2020
I need to replace the complete filter guide assembly since its broken for model dlex5101w. Is there a kit number for the complete assembly or part number? Also, is there a video or guide how to replace?
For model number DLEX5101W
Hi Ihab.There no complete assembly you will have to order the individual parts required. We do not have exact instructions. However this video should help you: https://www.youtube.com/watch?v=MdfaPs5KXjs. Thank you for your question and good luck with your repair.
What is the part called that opens and closes as the filter is taken out and put in
For model number 4974EL1002B
Hello Dennis, thank you for writing. The part is called the Filter Guide and is PS3524628. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
The lint filter sits in your dryer, and collects loose lint when the machine is operating. Sometimes the lint filter will become clogged or damaged, and in this case, you will need to replace your current lint filter wit...
