Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Wayne R - September 15, 2023
Verified Purchase
Dishwasher door spring replaceent
Spring was easily replaced and door is once again functioning easily and properly.
★★★★★
★★★★★
Paul S - January 21, 2022
Verified Purchase
Easy fix
Part was perfect and arrived quickly : fixed my dishwasher door in 10 minutes and saved a bundle !!
★★★★★
★★★★★
Cecil M - October 9, 2020
Verified Purchase
LG Dishwasher Door/ counterbalance springs replacement
Ordered/received two springs and two rope hinges. The order arrived quickly and well packaged. Replaced both sides. Required full pull out of washer to remove side panels. Re and re of springs and rope hinges straight forward (used pinch bar to stretch new springs). Door now functions like new. Thankyou Parts Select for the precise parts selection.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken door spring allows the door to overextend to the floor if not propped.
Simple, removed screws securing machine in the cabinet, then pull the unit out of the cabinet space about 10 inches. Springs are accessible within this extension. You need strong hands to extend the springs and attach them. Once attached, push machine back in place and re-install the anchor screws. In my situation, only one spring was broken, so the attached side revealed the correct slot to place the hook on the top position, the bottom position has a plastic lead for the spring, and that lead is attached to a rope to the door hinge. Note: Replace BOTH springs, even if only one is broken.
Other Parts Used:
Gregory L from INDEPENDENCE, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
27 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door was very heavy due to spring problem
Turn off the power at breaker box. Disconnect the power at dishwasher since I needed to pull the unit all the way out of the cabinet to get to screws on the back side for this model. Find and remove the screws to the cover. Remove cover. In my case, the rope on the connector assembly had snapped. I replaced spring and connector identically to functioning side. Did need a pair of pliers to provide enough tension on spring to install. Reconnected cover and power and moved back into the cabinet. Easy repair and my wife wondered why I hadn't done it sooner.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
October 22, 2017
In order to pull out the dishwasher unit there is a door gasket (not the tub gasket) that is flush with the surrounding cabinet. It is an upside down "u" shape in three straight pieces, and i cant figure out how to remove it without damaging it. I am trying to replace the door springs as the door is currently falling all the way open. Is there a way to remove it and put it back without damaging it, or should i try to slide the unit out with the gasket in place? If there is a way to send a picture i can do that. Thank you, bill
For model number LDF7932ST
Hi Bill,
Thank you for your question. Actually you do not have to remove that gasket at all when pulling out your dishwasher. To remove the gasket, you actually have to remove your mounting brackets at the top of your dishwasher and then pull the machine out a little bit. You would then slide the left and right sides up from your dishwasher and then pull your gasket off. I hope that helps! Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
John
July 27, 2023
If you buy a replacement door spring do two springs come in the pack? It does have two springs on the door , one on each side : correct ?
For model number LDF7774BD door springs
Hello John, thank you for getting in touch. This spring is sold separately. You will need two springs for both sides of the door. We hope that helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
