Microwave Locker 4026W2A019A

Hi Birol, Thank you for your question. Before you begin any repair please unplug the appliance from the electrical outlet. You will need to remove the plastic lining around the inside of the door. There are retainer clips holding the liner in place and you will need to use a putty knife to remove it. Depending on the type of microwave you have, you may have to come in from the bottom or from the top to remove the lining. Gently slide the putty knife in between the lining and the frame and go around the frame and gently pry it loose. On the hinge side you will need to come in from the backside to pry the lining off. The door latch is held in place by tension. There is a spring that is usually attached to the latch and to one of the fins on the door to provide it. With the inner lining removed you can now remove the old latch. Install the new latch by slipping it into the slots in the door and attach the spring to the bottom fin to allow for tension in the latch. Reinstall the lining and close the door. Plug the microwave back in. I hope this helps. Thank you and have a great day!

Hi Charlie, Thank you for the question.To remove the old locker and install the new one you will need to dissemble the door. Hope this helps!

Hello Marcin, Thank you for the question. The locker, or door latch assembly fits to the inside of the microwave door, and keeps the door closed. These are the "hooks" that are on the door and insert into the lock in the cabinet. We hope this helps!