Washer was giving an error and not removing water/spinning
Followed instructions on YouTube link. Replaced the shock absorber and washer is working really well.
Other Parts Used:
Magalys from WYOMING, MI
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ted
August 22, 2017
Does this kit include all 3 shocks or is price for just one?
For model number WM3470HVA
Hello Ted, thank you for contacting us. This is just for 1 shock absorber. Good luck with the repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Levi
April 17, 2019
Is this kit a single shock absorber replacement or all 3?
For model number WM2650HWA
Hello Levi, thank you for contacting us. It is one Shock Absorber and two Mounting Pins.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
May 28, 2019
This washing machine will squeak while starting to spin at low speeds, then quiets down as rpm's build. And it also seems to vibrate a bit more than i think it should accompanied by some thumping, which also evens out at higher speeds. I'm thinking possibly some loose counterbalance weights, worn/defective springs or shock absorbers?
For model number M2650HWA
Hello Robert, thank you for inquiring. For this symptom you will want to replace either the Spider part PS3635517, this Shock Absorber part PS3522317, or the Ball Bearing part PS11711139. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lot
December 13, 2021
Do you have a "kit" with all three shock absorbers and pins, or is it $150 to get all 3?
For model number LG/Kenmore Shock Absorber Kit 383EER3001J
Hello,
Thank you for your question. Before we can verify if we have a shock absorber kit, we will need the model number from your washer. We have included a link that you may use to find the location of the model number on your washer. If you could resubmit your question with this information, we would be happy to help you. If you have any questions, please let us know.
The water would not finish the spin cycle, it keep trying to balance the load but never went into the fast spin and gave UE CODE. It was a load of towel 5 or 6. We have do small loads since and it worked. Do you think a shock absorber is bad??
For model number LG Frontload washer about 5 years old
Hello Michael, thank you for your question. The UE code indicates that the washer is attempting to balance the load, which may be the result of the unit not being leveled correctly or the load itself being unbalanced. We recommend making sure the washer is level. If it is the floor that's not level, you can fix this by placing the washer on a sheet of plywood. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.