This vent grille mounts on the top of the microwave above the door.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
Whirlpool.
Part# W10468664 replaces these:
AP5589920
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Grille was pulling away and cracked on one side
Pulled off the damaged piece and screwed in the new one - it was that simple! Looks great and matches perfectly
Other Parts Used:
Yvonne from LOMBARD, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic grille vent became brittle over time and broke when changing charcoal filter.
Replacing the grill is so ridiculously simple (two small screws) that it is hardly worth writing "instructions" for it.
However, ordering the right part is a problem. My microwave has a stainless steel exterior but on your parts list there is no part clearly identified as such. Only black and white. Then there's one for which an "image is not available" so I figured perhaps that might be it. However I received the white part in the mail.
I then enquired if the part with a stainless steel exterior was available, or just its broken plastic base so that I could transfer the stainless steel wrap from the broken piece. The white plastic part that I received does not have certain slots to attach the stainless steel wrap.
However, you merely confirmed that the part I received was white so that was not very helpful. I installed the white part and it looks absolutely horrible on top of a stainless steel oven but it is what it is. But not too happy with your service and website to be quite honest.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
November 11, 2021
Is this the grid that holds the cover on the top front of the microwave that has the whirlpool label
For model number Wmh31017as-3
Hello Mike, Thank you for your inquiry. Yes, this part mounts above the door, has the whirlpool logo and allows airflow out of the microwave. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Han
March 1, 2023
Just ordered this grill and curious to see if the metal part with the Whirlpool logo is included or if this should be taken from the old part (which would not be a problem either). The plastic grill had become very brittle over time and some pieces broke off when changing the charcoal filter.
For model number WMH32519CS1
Hi Han, thank you for reaching out. According to our research, the Whirlpool logo is included with the Vent Grille. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
