Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Paul K - November 23, 2023
Verified Purchase
It was the OEM part. It came with both O-rings inplace.
I hope this motor / pump assembly lasts longer than the original which lasted only 2 years.
★★★★★
★★★★★
Maxime L - November 9, 2023
Verified Purchase
Pieces Brisé a la réception
J'ai reçu la pieces brisé, aucun service après vente!! Amazon est la meilleur avenue.
November 15, 2023
Merci pour votre avis. Nous sommes désolés d'apprendre que cela s'est produit, nous vous contacterons bientôt pour vous aider à résoudre ce problème.
★★★★★
★★★★★
Alex F - October 31, 2022
Verified Purchase
ECM circulator motor replacement
Not a cheap part, but it solved the problem. Old motor worked but did not go to a high speed to properly rinse. Thought it might be the main board but the new motor works better on all spray cycles.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
February 5, 2019
My dishwasher started making a loud whiring sound when washing. It’s quiet when draining. It does wash, it’s very noisy. I cleaned the screens, removed the plastic housing over the circulation pump and notice the plastic fly wheel is stiff and does not rotate freely by hand. I suspect the bearings on the circulation pump. Can you confirm? Is that a full pump replacement or is there some other fix?
For model number FGHD2465NF2A
Hello Richard, Thank you for the question. If the fly wheel is not turning freely it does sounds like it is defective. Unfortunately the wheel and bearings are not repairable on their own and the pump PartSelect Number PS3501028 will need to be replaced. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
November 23, 2019
Does this part come with both o rings?
For model number ps3501028
Hello James and thanks for writing.
No, the o rings are being sold separately. O rings Part Numbers: PS420467 & PS420466 are in the list of compatible items for your model. We hope this helps. Please contact us anytime.
I have this fgid2466qf4a Frigidaire dishwasher and none of the spray arms spin. I suspect that its maybe and issue with the circulation motor and there is not enough pressure. How else can i troubleshoot that this motor is not working? What is your return policy if i purchase this motor?
For model number FGID2466QF4A
Hello Martin and thanks for writing.
Not enough pressure could be from your water inlet valve # PS9865067 if that is faulty or debris stuck in it could cause your spray arms to malfunction. In some cases, if the water pressure coming into your house is low that can be a problem. So we would suggest checking the water valve first before moving on to the motor. You can check that part with an ohmmeter.
Apparently there is a difference between the “Drain Pump” and the “Drain Motor”. Drain Motor Resistance should be between 20 - 40 Ohms. (Drain Motor, attached to the sump pump, is larger.)
. We hope this helps. Please contact us anytime.
Is there a way to test to see if the motor is bad using a multi-meter? I am especially curious about part #: Ps3501028. Thanks.
For model number FGID2466QF5A
Hello Sean, thank you for your question. You would want to test the 2 wire connection for 120 vac when the drain is on. If there is 120 vac then the motor is faulty and would need replaced. I hoep this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sean
March 12, 2020
Is there a multimeter test i can use to determine if my circulation pump is working correctly? Thanks!
For model number FGID2466QF5A
Hello Sean, thank you for your question. You would want to test the 2 wire connection for 120 vac when the drain is on. If there is 120 vac then the motor is faulty and would need replaced. I hoep this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sean
March 12, 2020
Is the circulation pump responsible for draining the water from the dishwasher or does draining use a separate motor? Thanks!
For model number FGID2466QF5A
Hi Sean,
Thank you for your question. There is a drain pump that is responsible for draining the water from the dishwasher. The part number listed under your model number for the drain pump is PS8689824.
To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.
HI I have water leaking from the recirculation pump just where the clamp is I replaced both O rings on the pump do I need to replace the pump ? Thanks
For model number FGID2468UD2A
Hi Mike, thank you for reaching out. As you have already replaced the o rings, the issue could be with the circulation pump, part number PS3501028. You may need to replace it to fix the issue. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
