This knob accepts a D-shaped shaft. Sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Timer Not Working
This part works with the following products:
Dryer.
This part works with the following products:
General Electric.
Part# WE1M964 replaces these:
AP4980845, 1811122, WE1M964
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Timer mechanism on Dryer was dead
I followed a YouTube video demonstration, which explained how to open the Dryer console, disconnect eight different wire from the old, malfunctioning timer mechanism, remove the old timer, and install the new timer, reconnecting all of the wires to terminals on the new timer.
I followed your instructions. Removed the old knob. Used pliers to get inner pice off as the new knob has that little metal washer thingy in my new replacement knob. Thanks I am happy you save me money.
Other Parts Used:
Patty from PHILA, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob cracked at control circle, would not turn the metal shaft.
1. Pulled off the broken plastic turn knob. 2. Had to pry off the metal ring from inside the broken knob that stayed on the metal shaft. 3. Pushed on the new knob, with new metal ring inside, making sure to line up the flats- from knob and metal shaft.
Other Parts Used:
Jeanna from BELLAIRE, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knob broke
Replaced knob
Other Parts Used:
Jimmy from MINERAL WELLS, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The timer would not time down anymore and was so hard to turn then it broke the timer dial
Removed the back of the splash panel labeled all the wires disconnected the wires removed the old timer snapped in the new timer installed the wires and timer knob put the splashpan back on the dryer plug it back in
Other Parts Used:
WILLIAM from MARCELLUS, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ed
January 8, 2018
Hi - does p/n ps3487132, gray timer knob, also come with the metal clip that sits inside the d shaped connector? Knob is broken and won't turn timer, although i can turn it with plyers. Figured i would try replacing the knob before timer. Thanks - ed
For model number GTDP301EL1WS
Hi Ed,
Thank you for your question. The timer knob does come with the metal clip inside the shaft. I hope this helps. Thank you and have a great day!
33 people found this helpful.
Was this helpful?
Thank you for voting!
Jeanne Dumont
January 2, 2018
My knobs are not turning and i ordered some from GE not sure it was this site, but they do not fit. The part numbers i used did not come up. 234d1131 g006 or 234d1132 p016. I need a know for the on/off and a larger one for the temp. Knob. Can you find replacements for these knobs? Thank you, jeanne
For model number GTDP301EL0WS
Hello Jeanne, Thank you for your inquiry. Part# WE1M964 is the timer knob, and part# WH01X10462 is the start knob. Based on your description, you may also be having an issue with the switches. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
L. Schwartz
February 26, 2020
Need to replace timer knob which has #212d1726 printed on it.What is the correct knob?
For model number GTDP300EM1Ws
Hello, thank you for writing. Yes, that is the correct part number for your model.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
February 18, 2020
What is the correct part for the timer knob for this model dryer?
For model number GTDP300GM1WS
Hello Robert, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3487132. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Betsy
July 8, 2019
Dryer knob cracked, need to replace dryer timer knob. What would be the replacement knob?
For model number GTDX180ED3WW
Hello Betsy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8769912. Hope this helps!
Hello Keith, thank you for inquiring. The D-Shaped Knob Insert Clip part number PS267091 is sold separate from this replacement Timer Knob for your model. Good luck with your repair!
Was this helpful?
Thank you for voting!
Efren
May 14, 2019
Need a control knob
For model number Gtdp300gmows
Hello Efren, thank you for inquiring. For your model it is Knob part PS2370714.
Was this helpful?
Thank you for voting!
Barbara
March 15, 2023
I put the know on Cotton but the dryer didn’t heat. When I put it on permanent press it worked. I don’t think that the knob is working correctly.
For model number GTDP490EDOWS
Hi Barbara, thank you for your inquiry. Your dryer may be facing this issue due to a faulty cycle control switch, part number PS2337901, which may need to be replaced. We hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3487132
Manufacturer Part Number: WE1M964
