Part Location Diagram of WB16K10070 GE Small Burner - 5K
See part 155 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Small Burner - 5K

$52.56
  Special Order
PartSelect Number PS3486550
Manufacturer Part Number WB16K10070
Manufactured by GE
Product Description

Small Burner - 5K Specifications

Sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB16K10070 replaces these:
AP4980305, 1810516, WB16K10024
Back to Top
Customer Repair Stories
 Average Repair Rating: 5.0 / 5.0, 4 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The Burners and Burner Caps were missing
Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple.
Other Parts Used:
Burner Head - Large - 12K Vision Burner - Extra Large Burner Head - Medium - 9500 Burner Cap Burner Cap - Black - Medium - 9500 BTU Burner Cap - 5000 BTU - Black Burner Cap - 15K VENTURI 15K LP
  • Alejandro from Newark, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
31 of 54 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Well used burners..
Replaced the old with the new parts...stove like new...very pleased with the improved function and appearance of stove.
Other Parts Used:
Burner Head - Medium - 9500 Burner Head - Large - 12K Double Burner Pan - Left Side Double Burner Pan - Right Side
  • Melissa from Mastic Beach, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
7 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed To Replace Burner
Took longer to open the box.
Other Parts Used:
  • Robert K from York, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
gas burners not heating evenly
remove old burner, put new in place
Other Parts Used:
Burner Head - Large - 12K Burner Head - Medium - 9500
  • Juanita from GAINESVILLE, GA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeanina
October 18, 2017
Cannot use back small burner because the knob wont turn? Help
For model number JGB605SET1SS
PartSelect logo
Hi Jeanina, Thank you for the question.The knob slips onto a post or shaft that sticks out from the panel, it is connected to a burner control valve.If the shaft is not turning you will need to replace the burner valve. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Ricardo
November 17, 2017
Do this 3 different size burners are for natural gas or liquefied petroleum gas.
PartSelect logo
Hi Ricardo, Thank you for the question.The Burners work for both LP and Natural Gas. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Brenda
May 24, 2019
Can i use small burners for all four eyes
For model number RGB745EEH588
PartSelect logo
Hello Brenda, Thank you for the question. You would need to use the proper size burner for each. The small can not be used on all burners. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Luy
January 15, 2024
How to remove the burner heads (part nos. 155, 156, 157) ? All my 4 burners do not move. There appeared to be 2 screws holding each but they look fragile so I was afraid to damage them. Or the burners are just stuck thru years of neglect ? Thanks for help. Luy
For model number RGB533CEH8CC
PartSelect logo
Hi Luy, Thank you for your question. We have included a link to one of our YouTube videos that you may reference for information on how to remove and install the burner heads. The range in the video may not be the same as yours, but it will give you a general idea on how to remove and install the part. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3486550
Manufacturer Part Number: WB16K10070
Brand
Model Number
Description
General Electric
147210
Range
General Electric
147211
Range
General Electric
147212
Range
General Electric
147213
Range
General Electric
147260
Range
General Electric
147261
Range
General Electric
147262
Range
General Electric
147263
Range
Kenmore
36272201892
Range
Kenmore
36272201893
Range
Kenmore
36272205892
Range
Kenmore
36272205893
Range
Kenmore
36272206892
Range
Kenmore
36272206893
Range
Kenmore
36272208892
Range
Kenmore
36272208893
Range
Kenmore
36272210101
Range
Kenmore
36272210102
Range
Kenmore
36272211101
Range
Kenmore
36272211102
Range
Kenmore
36272212101
Range
Kenmore
36272212102
Range
Kenmore
36272214101
Range
Kenmore
36272214102
Range
Kenmore
36272220200
Range
Kenmore
36272220201
Range
Kenmore
36272220202
Range
Kenmore
36272220203
Range
Kenmore
36272220204
Range
Kenmore
36272221200
Range
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service