This pump is used for washing machines that do not have a lint filter and do not automatically clean out the excess built up lint.
***NOTE: This part may appear different, but will function the same as the original.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not drain
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Kenmore, Caloric.
Part# 350365 replaces these:
AP3138954, 536388, 20052235, 20052809, 20103702, 20103932, 26000350365, 285986, 350160, 350365, 350366, 358036, 358037, 358038, 362174, 36217400, 362180, 367158, 370402, 503956
...
Show more
, 508058, 76505, 80350365, 8202, 83338, 84849, 87075, 87393, 87796, 88434, 89561, 89563, 89981
Show less
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
water pump
replaced
Other Parts Used:
David from Homosassa, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
25 of 43 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jon
October 1, 2019
Intermittently not all water is pumped out at end of cycle. If I put the drain hose into a bucket, it pumps out. If I raise it up to the level of the drain hole in the wall, it barely pumps water. It can't provide 3 feet of head. Then the next load works. I recently put in a new timer switch that had a new connection point that i think had to do with the water level.Thanks,
For model number 11082074800
Hello Jon, Thank you for the question. If the water fill levels are good this should not effect the draining cycle. This sounds like a weak drain pump, PartSelect Number PS347731. You may also have a blockage in the pump. You can remove and clear the pump and the drain hoses. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
November 9, 2019
Hi, i am looking for a replacement water pump similar to your part # ps347731 . But with additional outlets for lint filter . I realize my model # is not recognized as machine was built in canada . However i have obtained parts from you before that fitted ok . There is a part # 20055272 2b on pump . I realize part may be obsolete but would appreciate any help thanks jim
For model number TO -43580 Inglis Liberator Plus
Hi Jim, sadly we can only really find parts by model number. I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
