Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Doreen G - February 12, 2022
Verified Purchase
Easy repair , .Followed the video, lots of great info. Best info was what direction to turn off fan nut...
Part was in good condition. Range works fine.
★★★★★
★★★★★
Isabel B - February 14, 2019
Verified Purchase
Worked as I expected
The problem was to remove the front nut was rusted, after w40 it came off. It was very quick to put the blade.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
replacing the fan on a convection oven (fan was making a vibration noise)
This was the first time replacing the fan. It is a lot easier to work in the oven compartment with the oven door removed, only two screws on the door and the hinges were released. I found that a couple of the screws were either rusted or stripped so I used a pair of pliers to remove the screws that were holding the diffuser in place. Once there was access to the fan I found that the fan was warped and that the blades were scraping against the back wall of the oven. The next challenge was to remove the retaining nut. I used a sheet metal screw to secure the warped fan to keep it from spinning. once I figured out that you have to turn the retaining nut to the right to loosen, it came off easily. 1/2" socket with extension. When I replace the fan I used two washers for spacers to make sure that the fan would not scrape the wall of the oven. Its been tested many times and the oven does not make that horrible sound anymore.
Other Parts Used:
John from Stevensville, MD
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
16 of 23 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gilberte
February 10, 2022
Noise in oven when I started until it reach the temperature. What it could be?
For model number FPEW2785PF
Hi Gilberte,
Thank you for your question. If your oven makes noise when it heats up, the noise may be coming from the elements. If the elements make a popping or crackling sound when they heat up, there may be a build up of food particles on them. If they do have a buildup on them, you will need to clean them. Inspect them also for any signs of damage, wear or blistering. If they appear fine, you will need to test them for continuity with a multimeter. If you have any questions, please let us know. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
