Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Greg R - October 16, 2023
Verified Purchase
Tricky installation (not as easy as on You Tube) - working as expected.
The part was in good condition, but the corners should be reinforced (too easy to tear which is why I had to replace the original). Not as good a part as original. The gasket is keeping the fridge cold and the gasket seems to be staying in place and not shifting. So far it's working and I am satisfied.
★★★★★
★★★★★
Owen H - November 15, 2018
Verified Purchase
Very easy to replace
Part arrived in good condition and had old one removed and new one installed in less than 30 minutes.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The door gasket had worn out and the door wouldn't shut properly
We took the edge out of the slot and pulled the old one off then put the new one on. Once we got the plastic edge started into the slot it was a breeze. Only took about 5 minutes. We were very pleased with the results.
Other Parts Used:
Jo from Hudson, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
30 of 35 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The rubber piece around it was worn out
We just had to find the trick to put it in where it would catch on and the rest was a piece a cake.
You had to put it in the groove where it would catch and snap it in place and the rest went in pretty easy.
Other Parts Used:
Carmen from Albany, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
28 of 35 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gasket wouldn’t hold door shut.
NO DIRECTIONS CAME WITH GASKET! Project failure as gasket tore on a corner. For the price of this gasket, I was DISAPPOINTED. Door is being held shut with a childproof strap.
Other Parts Used:
Patti from GARNEILL, MT
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gasket had several tears in it at the corners and was leaking air into the fresh food compartment
Removed the old gasket and ran the hard edged lip into the opening behind the door liner. Concerned that the gasket does not seem to be attaching itself to the door well. First put it on the side of the refigerator and it would not adhere enough to support itself. While it closes it just doesn't seem to attach with the magnets in the gasket. These magnetic strips have a weak magnet side and a strong magnet side. I wonder if they put the wrong side facing the door when they assembled it. Counter this with a new gasket for an upright freezer which was twice the length and attached itself firmly to the side wall of the freezer and did not slide down.
Other Parts Used:
James from BATON ROUGE, LA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original door gasket split from age, no longer sealing snugly to refrig.
Inserted scraper behind gasket breaking it free from door, permitting a hand hold. While putting tension on gasket, slid scraper around door gently removing old gasket. Replaced gasket starting at top gradually working around door. No need to remove door.
Other Parts Used:
William from LYNBROOK, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
September 26, 2019
Is the fresh food door gasket still available in black? If not can the white gasket be painted black? Thank you
For model number KTRC19MKBL03
Hi Scott, you can get the black gasket as part PS326947. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sheila
January 13, 2020
I am looking for a gasket for fridge door this is a 1995 fridge
For model number ET18NKXDN04
Hello Sheila,
Thank you for your question. The gasket for the refrigerator door is under part PS323891 for your model. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Josanne
September 13, 2022
Hi, how is this item packaged to be shipped?
Hello Josanne, Thank you for the question. The gaskets are pre packaged by the manufacture in a box. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Andy
November 28, 2022
I need a new gasket for an older apartment fridge, I've listed the model number. Will this work for me? What are all 3 dimensions, height, width and thickness.
For model number ET8FTKXKQ0 0
Hi Andy, thank you for contacting us. Yes, this part will fit your model. The length of this gasket is 44.50 inches and its width/thickness is 2.00 inches. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Was this helpful?
Thank you for voting!
Ray
October 5, 2023
For some reason the door will not stay secure w/o external pressure applied to lower corner on opening side. Seal looks in good shape , but it feels like something is pushing back as you push to close. Door has inside clearance to close. No sag looks apparent.
For model number RT18AKXKQ00
Hello Ray, thank you for the question. Based on our understanding of the issue, if the seal is in good condition, we would suggest checking the door stop, part number PS11739061, to fix the issue. We hope this solves your problem!
I need to replace the fridge door gasket. Does item number ps323891 have a magnetic seal, does it come in black, and what is the size of the gasket?
For model number wrt134tfdb
Hi Craig,
Thank you for your inquiry. Yes the gasket does have a magnetic seal. The gasket does come in black and the part number for it is PS11740393. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Craig
August 30, 2017
I need the gasket for the lower fridge door, the bigger door.
Hello Craig, thank you for contacting us. This is the gasket for the fridge door. Good luck with the repair!
Was this helpful?
Thank you for voting!
Jennifer
April 10, 2018
I need this gasket for the fridge but i need grey. Do you have it in grey?
For model number WRT359SFYM00
Hi Jennifer,
Thank you for your question. I have listed the part information for the grey gasket in a link down below for you. It is the third #6 gasket in the list of parts underneath your diagram there. I hope that helps. Good luck with your repair.
