Part Location Diagram of WR57X10023 GE Primary Water Inlet Valve
See part 795 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Primary Water Inlet Valve

$107.77
  Special Order
PartSelect Number PS304365
Manufacturer Part Number WR57X10023
Manufactured by GE
Product Description

Primary Water Inlet Valve Specifications

This part has one port and 2 solenoids and comes with a mounting bracket. The water valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | Not dispensing water | Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WR57X10023 replaces these:
AP2071735, 783336, WR57X10023
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.7 / 5.0, 20 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Leaking water valve
Removed black cardboard covering on back of refrig with nut driver (6 screws), turned off water supply to pump, removed cooper waterline to pump with adjustable wrench, removed 1 screw holding pump to refrigerator, removed plastic waterline from pump by turning hose counter clockwise. Inserter plastic water line in new pump by screwing line in clockwise, pushed orange plastic stop around waterline into pump, connected cooper water line to pump first wrapping threads on pump with teflon plumbers tape, reinstalled pump to refrig and cardboard back on refrig with 6 screws.

One side note:.

This is the second pump which has burst at the blue plastic seam in seven years.
Other Parts Used:
  • James from Centerville, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Socket set, Wrench (Adjustable)
8478 of 12455 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was leaking at valve, luckily it was only a mist, but still leaked through to basement before I noticed it.
Removed back panel using 1/4 inch nut driver. Shut off water and removed water supply line with a 1/2 inch open end wrench Then removed water supply line to ice maker & water @ door. This requires no tools, just push down on orange fitting & pull out tubing. Remove bracket and water valve assembly and install new one.
Other Parts Used:
  • Danny from Spring Lake, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
110 of 3848 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking from beneath the refrigerator
Emptyed refrigerator and pulled back from the wall. Turned off the water while moving then turned water back on. It was easy to see that the leak was coming from the water valve for the ice maker.
We ordered the part and it came on time and the problem is now fixed.
his is not the first time we have bought from partselect.com. We also were able to fix a problem with our Jenn-Air range which needed a replacement circuit board.
Other Parts Used:
  • Joseph from Dover, DE
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
103 of 4533 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Leak@Spout - Motherboard Lost it's Mind - Broken Ice Auger
Valve wasn't closing completely, replaced ALL valves I'm already in there). Got a pair of valves as spares too. Motherboard went AWOL...as a computer engineer it was a simple diagnosis....replace ..the broken Auger?....that was user error...Housekeeper put an ice pack in the ice drawer...you can just imagine the consequences. How easy was it?.....SO easy little hint....don't bother to wrestle the hoses off the valves...just cut them flush with the valve body....there's plenty of hose to spare. If you're a younger person you can do it in 15 mins
Other Parts Used:
BOARD ASM MAIN CONTROL Ice Bucket and Auger Assembly Water Valve and Bracket Assembly Secondary Water Inlet Valve
  • Marci A. from Neptune, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Wrench (Adjustable)
101 of 1366 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dispenser did not work (ice-maker did work)
This is a side-by-side frige with water and ice dispenser in the left freezer door. I first checked for possible water line freezing in the freezer door or in the water chiller area (behind the vegetable drawers) as described in e-articles I had read, but this did not appear to be the problem. I found two solenoid valve pairs; one that routes dispenser or ice-maker water to the filter and the other that routes the water to the end device. I ran a couple of tests on the solenoid valves and found that the first inlet valve that sends water to the filter did not work, but the second valve that relays the water to the dispenser was still working. By temorarily connecting the wiring for the dispenser solenoid to the functioning ice-maker solenoid, I confirmed that the wiring and switch were working properly and that the problem must be the solenoid itself (it also still hummed when the dispenser button was pressed). The entire quad solenoid valve assembly can be pulled out after removing the one hex-screw on the back of the frige (the assembly is all held together with a bracket). I disconnected the wiring connector to the solenoid valves. I disconnected the plastic water tubing by pushing it toward the fitting and then depressing the tubing inlet ring to release the tubing. I removed the two screws holding the solenoid valve and replaced it.
Other Parts Used:
  • Alan from Houston, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
90 of 105 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water leak on the water valve
I had noticed water on the front left of the fridge on the floor.I thought it was the drain in the freezer so i poured hot water with baking soda into the drain but it didn't help..I pulled the fridge out and saw water dripping from the water valve solenoid.I searched the web for parts and found Parts select.com.I found the part quickly and they had pictures from all angles to assure me that it was the exact part which was great.The transaction on line was simple and the part came the next day.I will definitly use this sight again
Other Parts Used:
  • JAMES from LEDGEWOOD, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
44 of 65 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water stopped running
Pulled the refrigirator out and removed the screws holding the cardboard cover in place. DISCONNECTED POWER. Then I removed the single screw holding in place the pumps assembly and pulled it out.
The incoming pump was not working in my case (this is the second time in 3 years it breaks down).
The incoming water hose can be easily disconnected as it screws in. However the hose leaving from the bottom of the pump needs a special technique and some force (squeeze and pull hard). It might be easier to use scissors to cut it altogether and be sure the hose is not damaged.
To reconnect it just push the hose deep into the pump, really easy. The just put the assembly back together, backover and all done.
Other Parts Used:
  • Anthony from New York, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
41 of 1604 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top of the valve ruptured
Isolated water line. Remove water valve from harness. Disconnect water connections. Disconnect electrical connections. Removed valve. Installed new part. Reconnected water connections and electrical connections. Opened water line.
Other Parts Used:
  • Jeremy from Anniston, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
39 of 67 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking Water
Unplugged frig. Turned off water supply to pump. Removed black cardboard covering on back of frig with nut driver (6 screws).

Took digital photo of assembly to confirm reassembly position.

Removed copper waterline to pump with adjustable wrench. Removed 1 screw holding pump assembly to refrigerator. Pulled assembly out of the frig. Unscrewed two small black screws on a second bracket. Pulled old pump further out of frig. Unplugged two connectors. Removed plastic waterline from pump by turning hose counter-clockwise and gently pulling.

Inserted plastic water line into new pump by turning line in clockwise and it pushing into orange plastic stop. Reconnected two electrical connectors. Reconnected bracket to pump with two small black screws. Gently pushed assembly back into the frig and reconnected pump assembly to the frig with 1 screw. Reconnected copper water line to pump first wrapping threads on pump with Teflon plumbers tape.

Turned on water to check for leaks. Installed cardboard back on frig with 6 screws. Plugged in frig.

NOTE. My new pump assembly had the electrical connectors reversed. Take care to pair up the correct colored connectors.
Other Parts Used:
  • Paul from Danvers, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
37 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water had leaked out behind the refrigerator and seeped into the basement walls. Noticed the paint peeling off the walls and traced the problem to the refrigerator's leaky valve
The leak was obvious and I took out the cardboard backing. I closed the valve (water supply) to the water dispenser and ice maker.

With the screw drivers and socket set, I was able to take out the old valve and disconnect the hoses.

Since the part was identical to the leaky valve it was just a matter of reversing the steps. I had previously researched on the web to find the identical part and found a match at Partselect.com. I wish all my repair attempts turn out to be this easy. I wish GE had used better parts since this incident has set me back by several thousand dollars due to the water damage to the wooden floors, basement ceiling and walls.
Other Parts Used:
  • Ram from Atlanta, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
33 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

22 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
September 12, 2017
Have water to ice maker but not dispenser already changed part 799 on diagram will this correct problem
For model number TPX24BPBEBB
PartSelect logo
Hello Craig, thank you for your email. It sounds like it may be an issue with the dispenser control board. If this becomes faulty it can cause issues such as no water, no ice, or both. Hope this helps!

28 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
DAN
August 30, 2017
Part # ps304374, is the correct part I need for water is not going to the ice maker nor to the water dispenser?
For model number GSS23WG
PartSelect logo
Hi Dan, Thank you for the question. Yes we recommend replacing the water valve if it is not releasing water to the ice maker and dispenser. We will be happy to verify the correct part number but we will require the full model number of the appliance. Refrigerators have a second sticker on the inside wall of the appliance with the complete model number. Please feel free to submit a new question or contact our customer service with the model number to verify the correct valve part number. Look forward to hearing from you!

25 people found this helpful.

Was this helpful?
Thank you for voting!
Licinio
September 17, 2017
La lavadora permanece lavando, no responde los programas de los ciclos programados, al tocar la perilla del selector del reloj programador hace la parada, y comienza el siguiente ciclo, eso ocurre entre ciclos. Ejemplo: El ciclo de lavado y se para al final del exprimido si no se toca la perilla del programador,
For model number FLSE72GCS8
PartSelect logo
Hola Licinio, Gracias por su pregunta. Parece que es posible que necesite reemplazar su Timer electrónico. Puede probar esa parte con un multímetro para comprobar si está funcionando correctamente. Espero que esto ayude. Buena suerte con su reparación.

23 people found this helpful.

Was this helpful?
Thank you for voting!
Mitchell
December 29, 2017
Water dispenser works, but leaks a little water after usage or after filter is attached, will the water inlet valve fix that problem?
For model number TFX26KPDAAA
PartSelect logo
Hello Mitchell, Thank you for your inquiry. You should check the water inlet valve, the water tube union and the plastic tubing. Hope this helps!

23 people found this helpful.

Was this helpful?
Thank you for voting!
DAN
August 30, 2017
I was asked to get back with you with the total model #.. no water is going to iced maker or dispenser. i believe i need a dual inlet water valve.. please confirm with the part # i need.. thanks for your help..
For model number GSS25WGTABB
PartSelect logo
Hello Dan. This does sound like it will be the water valve. The correct part number for the water valve on your model would be PS304374. Good luck with the repair!

20 people found this helpful.

Was this helpful?
Thank you for voting!
Nancy
January 15, 2018
I ordered part #ps10059162, temperature sensore, on 1/8 and got it and was put on stove on 1/13, when son could do it. The stove works, but not like it should. The stove starts heating but stops about halfway thru the cycle. Ex: Set it for 400* and it will stop heating at approx. 275*. You can turn oven off, restart the heat cycle and it will work. I really need this bottom oven to be more reliable so hoping you can tell me if there is another part i might possibly need. Thank you, nancy
For model number JB870DT1BB
PartSelect logo
Hi Nancy, Thank you for your question. It sort of sounds like you may also have an issue with your temperature sensor inside of your appliance. I would suggest testing that part with a multi meter to make sure that it is working correctly. It sounds like it is just not reading the temperatures correctly. Good luck with your repair.

19 people found this helpful.

Was this helpful?
Thank you for voting!
Dennis
January 16, 2018
My washer would not go into a spin after draining the water the pump would remain running without spinning. I wanted to test the lid switch, so i put a jumper on it , the washer will now spin but for only one cycle, if i remove the jumper and install it again the washer will start spinning. I must keep doing this to complete the wash cycle. Please help.
For model number 11082405140
PartSelect logo
Hi Dennis, Thank you for your question. Based on what you described, it sounds like the lid switch is the issue and it needs to be replaced. You should also check the direct drive motor coupling, the clutch assembly and the direct drive water pump. I hope this helps. Thank you and have a great day!

18 people found this helpful.

Was this helpful?
Thank you for voting!
Wayne
January 21, 2018
Water dispenser turns on and dispenses water randomly without pressing button. Over nite it fills a 16 ounce cup. Changed control board in front and valve in rear bottom. There is another valve farther in i have not changed. Had technician service ice maker too so this is not it.
For model number Tfs28ppbebs
PartSelect logo
Hi Wayne, Thank you for your question. There are 2 other valves listed under your model number. The primary water valve, part number PS304365 and the secondary water inlet valve, part number PS304366. I hope this helps. Thank you and have a great day!

15 people found this helpful.

Was this helpful?
Thank you for voting!
Wayne
January 26, 2018
Whenever our ice maker fills, the water dispenser runs, overfilling the tray on the door and running to the floor. This occurs at any time of day or night.Our ice maker is also not filling completely, only the first half on the refrigerator side filling and making ice. These 2 may be related. I am most concerned about the water dispenser just running by itself but i should address the ice issue too. Thanks.
For model number TFS28PPBEBS
PartSelect logo
Hello Wayne, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: water inlet valve, ice maker switch, dispenser switch, dispenser control board, door switches and water tubes. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

13 people found this helpful.

Was this helpful?
Thank you for voting!
Rajendra Nayak
February 14, 2018
Thanks for that quick answer. Is there any way of pin pointing which part is causing this problem rather than suspecting parts ,replacing it and then not solving the problem go after other parts those have direct link with each other, to the problem? Or is it that leave this problem to the pros who are equipped with the gadgets that spell out who is the culprit that causes the problem?
For model number LSR8233EZ0
PartSelect logo
Hi Rajendra, Thank you for your question. the only way to see which part is causing the issue is to inspect each one. For any electronic parts you will need to use a multimeter to check the continuity of them. I hope this helps. Thank you and have a great day!

13 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
;
Model Cross Reference
This part works with the following models:
PartSelect Number: PS304365
Manufacturer Part Number: WR57X10023
Brand
Model Number
Description
Kenmore
36350232000
Refrigerator
Kenmore
36350237000
Refrigerator
Kenmore
36350242000
Refrigerator
Kenmore
36350247000
Refrigerator
Kenmore
36350622000
Refrigerator
Kenmore
36350627000
Refrigerator
Kenmore
36358892894
Refrigerator
Kenmore
36358892896
Refrigerator
Kenmore
36358892897
Refrigerator
Kenmore
36358892898
Refrigerator
Kenmore
36358895894
Refrigerator
Kenmore
36358895896
Refrigerator
Kenmore
36358895897
Refrigerator
Kenmore
36358895898
Refrigerator
Kenmore
36358897894
Refrigerator
Kenmore
36358897896
Refrigerator
Kenmore
36358897897
Refrigerator
Kenmore
36358897898
Refrigerator
Kenmore
36359472990
Refrigerator
Kenmore
36359472991
Refrigerator
Kenmore
36359477990
Refrigerator
Kenmore
36359477991
Refrigerator
Kenmore
36359479990
Refrigerator
Kenmore
36359479991
Refrigerator
Kenmore
36359492990
Refrigerator
Kenmore
36359492991
Refrigerator
Kenmore
36359499990
Refrigerator
Kenmore
36359499991
Refrigerator
Kenmore
36359522996
Refrigerator
Kenmore
36359522997
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service