Average Repair Rating: 3.6 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Frost building up in ice shoot air leaking around door recess assembly
First disconnect power and turn off water supply.Removes the cover that indicates water and ice settings,removed 4 screws that held the switch assembly on,unplugged wiring harness (left solenoid wires connected.removed screw holding arm that closes door and removed assembly.Covered hole with duct tape ordered parts (which came very quickly turned water and power back on.When new parts came actuator arm was different on door put old one on door and reassembled in reverse order
Followed previous description, when the face plate came off, parts appeared straight forward. I turned off the refringerator at the circuit breaker, so didn't have to move it.
went to the repair site, saw the video and used it to replace the parts. didnt have the hinge assembly which made the flapper stay open and thus caused the icing. recently ordered a replacement and i hope that this will cause the flapper to seat properly.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeff
September 11, 2017
Do you carry the hinge for the flapper on the ice-maker? Or, is there a hinge-flapper combination? Thanks.
For model number TBX25PRBSLCC
Hi Jeff,
Thank you for your inquiry. There are 2 parts you will need to hold the flapper. You will need the dispenser assembly crank, part number PS293032, and ice dispenser door spring, part number PS299222. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Sophia
October 14, 2019
This old side by side has water/ice dispenser on freezer side. The old spring gets stuck and won't shut off. Need new spring and local appliance store said they no longer make it. Do you have one? Thank you
For model number TFX25ZPBBAA
Hello Sophia, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS299222. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This part mounts in the ice dispenser. The crank no longer comes with this part but you can use original crank. The crank is sold separately depending on the model number of your appliance.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS299222
Manufacturer Part Number: WR2X8663
