Part Location Diagram of WD14X10009 GE Hinge Arm Link
See part 716 in the diagram
Replacing your General Electric Dishwasher Hinge Arm Link
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Hinge Arm Link

 Fits your 36314071791!
★★★★★
★★★★★
13 Reviews
$10.28
  Special Order
 Fits your 36314071791!
PartSelect Number PS259336
Manufacturer Part Number WD14X10009
Manufactured by GE
Product Description

Hinge Arm Link Specifications

The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In this case, you will need to replace the hinge link. Pull out your dishwasher to inspect the hinge and spring, if the link is broken, it may be disconnected and on the ground already. If not, you can remove the hinge arm link by simply disconnecting it from the hinge and spring, then replacing it with the new part. The hinge arm link is a small piece of white plastic about an inch and a half long. It is sold individually, and is an OEM part from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Dishwasher Hinge Arm Link

Replacing your General Electric Dishwasher Hinge Arm Link
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WD14X10009 replaces these:
AP2039321, 270839
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
13 Reviews
5.0
Filter By Rating:
  • 5 Stars
    13
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
plastic hinge arm link broke causing door to flop open
First I had to unscrew screws under the counter then pulled built in dishwasher out from under the counter, attached hing arm link to right side bracket on door, and the other end I attatched to a spring at the back of the unit. Thats it! and pushed the dishwasher back into place. All back to normal....by the way Im a 67 yr old great grandmother...
Other Parts Used:
  • Margaret from Meridian, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
28 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door dropped all the way down
The repair itself was simple. I replaced the broken plastic pulley and the cable attached to the door and spring because one end was bent. I also had to remove the fitting that held the pulley in place. In order to access the spring, I had to pull the dishwasher way out and that required disconnecting the water supply, the drain tube, and the electrical wiring! Then I had to reconnect everything. So although the repair took less than 30 minutes, the rest of the work took a couple hours.
Other Parts Used:
Door Hinge Cable Hinge Cable Pulley
  • Dennis from GETTYSBURG, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic hinge arm link broke
Squeeze the new link to the cable hook with pliers while locking the vise grip to the cable for easier handling. Then, using the vise grip on the cable, hook the other end of the link to the dishwasher door hook
Other Parts Used:
  • Eric from EAST MEADOW, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken spring on door.
See GE web site for repair instructions. Take out screws at top of door. Slide unit out there is a spring on each side of the door just look at the good one for details. Easy fix. About 30 minutes.
Other Parts Used:
  • Ron from SOUTHPORT, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic coupling broke on door cable counter balance
Removed dishwasher from under counter. Removed both cable pulleys and bushings. Threaded new cables and remounted pulleys and bushings. Finally stretched springs onto cables. Checked counter balance and reinstalled dishwasher.
Other Parts Used:
Door Hinge Cable
  • Todd from DALLAS, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge arm link wore out
Used Phillips screwdriver to undo brackets that keep dishwasher in place. Pulled out dishwasher from underneath the counter. Placed hinge arm in spring, hooked spring onto clip, placed hinge arm in clip. Put back dishwasher under the counter and screwed in place. Took all of 15 minutes. Saved 185.00 for service call.
Other Parts Used:
  • Samuel from LAS VEGAS, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Judy
July 12, 2021
The door is not shutting all the way.Also it doesn't lay flat when door is opened i was told the spring was bad and needed to be replaced i have had this dishwasher a long time with no problems ever . Does that sound like the correct diagnosis? Thank you
For model number gsd3800gcc
PartSelect logo
Hi Judy, Thank you for your question. If your dishwasher door is not shutting correctly, there are some parts that you will need to check to see which one is causing the issue. You will need to check hinges, the springs and the hinge arm links. We hope this helps! Good luck with the repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS259336
Manufacturer Part Number: WD14X10009
Brand
Model Number
Description
Kenmore
36314031000
Dishwasher
Kenmore
36314031001
Dishwasher
Kenmore
36314032000
Dishwasher
Kenmore
36314032001
Dishwasher
Kenmore
36314038000
Dishwasher
Kenmore
36314038001
Dishwasher
Kenmore
36314039000
Dishwasher
Kenmore
36314039001
Dishwasher
Kenmore
36314061791
Dishwasher
Kenmore
36314071791
Dishwasher
Kenmore
36314071792
Dishwasher
Kenmore
36314071793
Dishwasher
Kenmore
36314071794
Dishwasher
Kenmore
36314072791
Dishwasher
Kenmore
36314072792
Dishwasher
Kenmore
36314072793
Dishwasher
Kenmore
36314072794
Dishwasher
Kenmore
36314072795
Dishwasher
Kenmore
36314074791
Dishwasher
Kenmore
36314074792
Dishwasher
Kenmore
36314074793
Dishwasher
Kenmore
36314074794
Dishwasher
Kenmore
36314075791
Dishwasher
Kenmore
36314075792
Dishwasher
Kenmore
36314075793
Dishwasher
Kenmore
36314075794
Dishwasher
Kenmore
36314081990
Dishwasher
General Electric
36314081991
Dishwasher - DISHWASHER
Kenmore
36314081992
Dishwasher
Kenmore
36314081993
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service