GE WD14X10009 - Hinge Arm Link | PartSelect.ca
Hinge Arm Link – Part Number: WD14X10009
( Grid squares measure 1x1 inch )
Hinge Arm Link – Part Number: WD14X10009 Hinge Arm Link – Part Number: WD14X10009 https://partselectca.azureedge.net/Schematics/GE/00125643i02.gif

Hinge Arm Link

Your Price

CAD$7.16

PartSelect Number PS259336
Manufacturer Part Number WD14X10009
Manufactured by GE

The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In this case, you will need to replace the hinge link. Pull out your dishwasher to inspect the hinge and spring, if the link is broken, it may be disconnected and on the ground already. If not, you can remove the hinge arm link by simply disconnecting it from the hinge and spring, then replacing it with the new part. The hinge arm link is a small piece of white plastic about an inch and a half long. It is sold individually, and is an OEM part from the manufacturer.

This part works with the following brands: General Electric, Hotpoint, Kenmore.

This part works with the following products: Dishwasher.

This part fixes the following symptoms: Door latch failure | Door won’t close

Videos For installing this part.

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer Repair Stories

Average Repair Rating: 4.0 / 5.0, 4 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Margaret from Meridian, MS
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WD14X10009
plastic hinge arm link broke causing door to flop open
First I had to unscrew screws under the counter then pulled built in dishwasher out from under the counter, attached hing arm link to right side bracket on door, and the other end I attatched to a spring at the back of the unit. Thats it! and pushed the dishwasher back into place. All back to normal....by the way Im a 67 yr old great grandmother...
28 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Ron from SOUTHPORT, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
WD14X10009
Broken spring on door.
See GE web site for repair instructions. Take out screws at top of door. Slide unit out there is a spring on each side of the door just look at the good one for details. Easy fix. About 30 minutes.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Samuel from LAS VEGAS, NV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WD14X10009
Hinge arm link wore out
Used Phillips screwdriver to undo brackets that keep dishwasher in place. Pulled out dishwasher from underneath the counter. Placed hinge arm in spring, hooked spring onto clip, placed hinge arm in clip. Put back dishwasher under the counter and screwed in place. Took all of 15 minutes. Saved 185.00 for service call.
1 person found this instruction helpful.
Was this instruction helpful to you?
Dennis from GETTYSBURG, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
WD01X10393, WD01X10217, WD14X10009
The door dropped all the way down
The repair itself was simple. I replaced the broken plastic pulley and the cable attached to the door and spring because one end was bent. I also had to remove the fitting that held the pulley in place. In order to access the spring, I had to pull the dishwasher way out and that required disconnecting the water supply, the drain tube, and the electrical wiring! Then I had to reconnect everything. So although the repair took less than 30 minutes, the rest of the work took a couple hours.
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
7 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Kenmore
36314031000
Dishwasher
Kenmore
36314031001
Dishwasher
Kenmore
36314032000
Dishwasher
Kenmore
36314032001
Dishwasher
Kenmore
36314038000
Dishwasher
Kenmore
36314038001
Dishwasher
Kenmore
36314039000
Dishwasher
Kenmore
36314039001
Dishwasher
Kenmore
36314061791
Dishwasher
Kenmore
36314071791
Dishwasher
Kenmore
36314071792
Dishwasher
Kenmore
36314071793
Dishwasher
Kenmore
36314071794
Dishwasher
Kenmore
36314072791
Dishwasher
Kenmore
36314072792
Dishwasher
Kenmore
36314072793
Dishwasher
Kenmore
36314072794
Dishwasher
Kenmore
36314072795
Dishwasher
Kenmore
36314074791
Dishwasher
Kenmore
36314074792
Dishwasher
Kenmore
36314074793
Dishwasher
Kenmore
36314074794
Dishwasher
Kenmore
36314075791
Dishwasher
Kenmore
36314075792
Dishwasher
Kenmore
36314075793
Dishwasher
Kenmore
36314075794
Dishwasher
Kenmore
36314081990
Dishwasher
General Electric
36314081991
Dishwasher - DISHWASHER
Kenmore
36314081992
Dishwasher
Kenmore
36314081993
Dishwasher