GE/GE_Thumb/00124321i02.gif
See part 702 in the diagram
Replacing your General Electric Dishwasher Lower Front Dishrack Wheel play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Lower Front Dishrack Wheel

★★★★★
★★★★★
5 Reviews
$12.92   Special Order

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 36314072792!
 Fits your 36314072792!
PartSelect Number PS259136
Manufacturer Part Number WD12X271
Manufactured by GE
Product Description

Lower Front Dishrack Wheel Specifications

This wheel is located on the front lower rack. It includes the axle. Sold individually.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Kenmore, Hotpoint, Amana.
Part# WD12X271 replaces these:
AP2039084, 2493, WD12X271, WD12X0271, WD12X0426, WD12X0440, WD12X426, WD12X440
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

6 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Edward
September 25, 2017
Is this a single unit wheel price?
For model number GSC3200G00WW
Hi Edward, Thank you for the question, This part is sold individually. Good luck with the repair !

9 people found this helpful.

Was this helpful?
Thank you for voting!
Deb
July 10, 2019
I purchased a new lower rack from you based on the model number. It is not wide enough, the wheels keep coming off the side. When i looked at the old wheel (that has melted) it is thicker. Do you sell thicker wheels?
For model number Gsd4000n10cc
Hello Deb, thank you for your question. The front wheels for the lower rack are PartSelect Number PS259136 and the rear wheels are Part #: PS11726733. These are almost an inch thick, but should have come with the rack. If the part number you ordered for the entire rack assembly was not Part #: PS3486947 then the wrong rack was ordered. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Wayne
November 27, 2019
Please advise the part number for the wheels on the bottom rack of the dishwasher. They are all worn and the clips are coming off resulting in the wheels falling off too. Thanks.
For model number GSD6610G01CC
Hello Wayne, thank you for your question. The lower rack wheel and axle kit for this unit is Part #: PS11726733. Please enter the part number into the site for current price and availability. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Pam
December 15, 2017
The rack wheel is not together-it is 2 parts that do not snap together. How do I fit these 2 parts together?
For model number WD12X271
Hello Pam, Thanks for your question. The wheels are intended to snap onto the axles, and then you can attached the combined part onto the rack. I hope this helps.

Was this helpful?
Thank you for voting!
Hans
August 1, 2019
Will this front bottom roller fit a Miele? Thanks!
For model number Miele Future Classic
Hi Hans, Thank you for your question. We do not carry parts for this brand and you will need to contact Miele for information. Their telephone number is 1-800-843-7231. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Victoria
September 21, 2017
Does this wheel come with the axle?
For model number HDA3220Z07BB
Hi Victoria, Thank you for the question. This wheel is located on the front lower rack and includes the axle. This part is sold individually. The wheel and the axle are made of white plastic. Good luck with the repair!

Was this helpful?
Thank you for voting!
Part Videos

Replacing your General Electric Dishwasher Lower Front Dishrack Wheel

Replacing your General Electric Dishwasher Lower Front Dishrack Wheel play video
Customer Repair Stories
 Average Repair Rating: 4.8 / 5.0, 46 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Wheel broken off bottom rack
Open the tiny plastic package in inserted the wheel onto the "axle". Opened the dishwasher, pulled out the bottom rack and snapped the wheel onto the rack. Done!
Other Parts Used:
  • Julie from Maumee, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
490 of 496 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The stud assembly in the middle of each wheel no longer stayed inside the wheel.
Just pulled off the old wheel. I just had to push in the stud to the wheel and pushed it on to the rack of the dishwasher. Very easy repair! Only disappointing part was that it bothered me to have to purchase the stud with the wheel. I was told they only came as the set. I only needed to purchase that inside stud. My wheels were fine.
Other Parts Used:
Lower Rack Wheel Kit - 8 Pack
  • Wendy Baldwin from Stowe, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
372 of 388 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rollers fell off lower rack of dishwasher.
First removed four old wheels. then attached four new wheels to lower rack by pressing into slots.
Other Parts Used:
  • Lloyd from The Villages, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
365 of 366 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel replacement
Pulled the end cap off and replaced the wheel.
most of the parts were for future repairs
Other Parts Used:
Lower Rack Wheel Kit - 8 Pack Upper Roller and Axle - Kit of 4 RACK SLIDE END CAP
  • michael from perry hall, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
231 of 432 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking at rubber connector - pump wash arm
First removed dishwaser from under counter so I could get to rubber connecter. It is located in center under dishwasher. I first needed to unscrew with wrench rubber connection at pump and and then the complete piece unscewed by hand from pump wash arm. I then just had to screw new rubber connector back on to bottom of dishwasher and re-attached at the pump. It was very easy to replace the rubber connector. I also replaced the dishwasher sump housing because it was made of same rubbber material and feared it was deteriorating also. I had to unscrew with wrench at pump as well and it just popped out from inside dishwasher after unscrewing screen inside dishwaser. Popped new piece in and screwed screen back on and reconnected underneath dishwasher back to pump. The rack roller wheel just popped right on. FYI: The wheel is actually 1.75 inches in diameter not 2 inches. I was worried it might be too big if it where 2 inches but it was the same size as the other wheels which was 1.75 inches. The hardest part of this job was getting the dishwasher in and out from under the counter. The good news is that most of these parts are standard and the replacement parts fit perfect.
Other Parts Used:
Pump To Wash Arm Rubber Connector Sump Housing
  • Skott from Mason, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Wrench set
83 of 145 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
front twoo rack rollers broken ,bottom rack roller broken
for the top rollers you must remove thethe end cap. this was easy ,i placed a block of wood on the outside .placed the punch on the inside where the channel is pushed in to hold cap on. smacked it till it was pushed out far enough to remove end cap. new rollers simply snap on. very easy,
Other Parts Used:
Upper Roller and Axle - Kit of 4
  • Russell from Pueblo, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
77 of 141 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheels were worn out and kept falling off
popped old wheel off popped new one on
for the rack roller i took the ends off and slid old rollers off then slid new ones on.
Other Parts Used:
Upper Roller and Axle - Kit of 4
  • JOHN from PURCELLVILLE, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
76 of 80 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rollers broke off from bottom rack of dishwasher
Went to www.PartSelect.com. Part was easy to locate online with GE model number and illustraion online. They shipped the parts in two days and I put the new parts on by hand. Saved a $135 service call from GE. One part came in broken from the factory. Upon calling customer servce, PartSelect sent out a replacement part the next day - no problem. Great service, would be happy to use again - Thank you!
Other Parts Used:
  • Reginald from Hamilton, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
66 of 128 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light socket was bad on refrig and roller was missing on diswasher
pulled the lightsocket back and down and took out bulb an unplugged. replaced with new socket nd put back in refrigerator and was missing roller in dishwasher. On that part all i had to do was push the clip onto the little bar and push the roller in
Other Parts Used:
Light Socket
  • Michael from Lakeland, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
missing wheels on lower dish rack
Very simple repair: assemble the wheel/clip assembly. Attach to lower dish rack.

I was very happy with the fast delivery by PartSelect.
Other Parts Used:
  • Shoji from Arlington, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.8
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS259136
Manufacturer Part Number: WD12X271
Brand
Model Number
Description
General Electric
1200L02
Dishwasher - DISHWASHER
Kenmore
18385
Dishwasher - DISHWASHER
General Electric
3000B10
Dishwasher - DISHWASHER
General Electric
3000W10
Dishwasher - DISHWASHER
Kenmore
361402891
Dishwasher - Kenmore Dishwasher Model 36.1402891 (361402891, 36 1402891) Parts
Kenmore
3631401190
Dishwasher
Kenmore
3631401191
Dishwasher
Kenmore
3631401590
Dishwasher
Kenmore
3631401591
Dishwasher
Kenmore
3631401592
Dishwasher
Kenmore
3631401890
Dishwasher
Kenmore
3631401891
Dishwasher
Kenmore
3631401892
Dishwasher
Kenmore
3631402190
Dishwasher
Kenmore
3631402191
Dishwasher
Kenmore
3631402192
Dishwasher
Kenmore
3631402590
Dishwasher
Kenmore
3631402591
Dishwasher
Kenmore
3631402592
Dishwasher
Kenmore
3631402890
Dishwasher
Kenmore
3631402891
Dishwasher
Kenmore
3631402892
Dishwasher
Kenmore
36314031000
Dishwasher
Kenmore
36314031001
Dishwasher
Kenmore
36314032000
Dishwasher
Kenmore
36314032001
Dishwasher
Kenmore
36314038000
Dishwasher
Kenmore
36314038001
Dishwasher
Kenmore
36314039000
Dishwasher
Kenmore
36314039001
Dishwasher

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service