Jack
May 21, 2019
Hi, i am having trouble diagnosing my oven. Neither bake or broil elements are working, the stove top does though. We have power everywhere power should be, i have checked the elements and thermostat and they both have continuity, but the thermal cut-out doesn't. I replaced the cutout and the new one still shows to have no continuity. Is it suppose to show continuity? I don't know what my next steps are. Can you please help shed some light on my issue. Thank you, jack
For model number 790.46763908
Hi Jack, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.
Thank you for voting!