Dual Element with Limiter -9 Inch /6 Inch - 1300W 1200W.
With this element, you can adjust the size of the burner you want to use to match your pots/pans.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Range Dual Element with Limiter
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bashir A - November 4, 2022
Verified Purchase
My element was not heating
Element was not heating. Replaced element, started working.
★★★★★
★★★★★
John M - March 9, 2022
Verified Purchase
Great replacement part
The part arrived in great condition. The wiring is a little different than the old burner, so you do have to make sure to take careful note of the old wiring and where those wires go on the new burner. Other than that, the installation was easy, and the new burner heats up quickly.
★★★★★
★★★★★
Randy F - October 13, 2020
Verified Purchase
Easy install.....
Received quickly. Install tip was great! Found one connector burned up, installed burner and new spade connector on wire and we're back in business!
★★★★★
★★★★★
Don C - August 22, 2020
Verified Purchase
kitchen range
I took a few pictures once the cook top was open and supported. That made selecting the right holes successful. removed and installed each wire connector from the old element to the new. The new element was an exact match. Removed the mounting bar to remove the old element, installed the new pre wired element and secured the mounting bar. works like new. Thanks
★★★★★
★★★★★
Chandris A - July 28, 2020
Verified Purchase
works great
we ordered an element for our stove and it works great
★★★★★
★★★★★
Carlos F - June 4, 2020
Verified Purchase
Easy repair. Part was perfect fit.
The part was easy to install especially with the clear instructions on the website. The video was helpful too. The part showed up promptly as promised.
★★★★★
★★★★★
Max L - April 14, 2020
Verified Purchase
Great Part
Part arrived fast. Fit well and works well so far.
★★★★★
★★★★★
Wilf R - March 31, 2020
Verified Purchase
Pretty smooth experience
Fast service, right part, ueseful tutorial and stove back in good working order.
★★★★★
★★★★★
Reijo K - December 3, 2019
Verified Purchase
easy to instal
Right part works perfect thank you fast delivery
★★★★★
★★★★★
Carol Ann W - January 29, 2019
Verified Purchase
part not identical to original.took a while with the original wiring schematic and an ohmmeter to determine what wire went where.It would be nice if in future you included aa memo to indicate how to re-wire parts that are not identical to orignal.,as this added 15-20 min to repairs.
The part worked fine ,once re-wiring was figured out ,and stove is now working fine.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.6 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burned element
Flip up top, remove wires and two screws. Replace in opposite way. Turn off power to stove first.
Other Parts Used:
Tom from Wallingford, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
64 of 118 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element Burn out
Self easy
PS Great service Super FAST. Thanks Jesse
Other Parts Used:
Jesse from Forest, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
25 of 59 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old element connections different from new element
Disconnected power at breaker. Removed cooktop mounting screws, lifted top and propped in up position. Removed two screws and lowered two front burners mounting frame. Wiggled dual element free at the clips and proceeded to swap wires one at a time and realized the difference with connectors 1a and 2b much later when only the center portion was heating up. Finally figured out the problem and everything works as advertised. Pay attention if you own a Kenmore product.
Other Parts Used:
Frederic from KILLEEN, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
9 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One section of heating element failed to heat.
Followed on-line instructions to remove the defective heating element. Some connection tabs on the replacement unit were different than the original. One tab was too wide to accept the stove's slip-on wire connector without fling down the tab width on the heating element. Thanks to some on-line instructions, wire connections to element 1a and 2a had to be reversed. If not for those instructions I would probably have ended up sending the unit back to the supplier, as an incorrect replacement !
Other Parts Used:
Fred from VESTAL, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switch and Burner went out.
Replaced switch by according to video with no issues, Terminals were nearly identical as the new switch.
The terminals on the new burner were not located in the same position as the terminals on the old burner. I had to reference the wiring diagram to locate the correct wire to terminal location. There was not enough slack in the wires to position the new burner in the same position as the old burner. I had to rotate the new burner so the wires would reach. This cause me to have to rotate the warming burner because rotating the new burner, the terminals interfered with the terminals on the warming burner. I also had to reposition some of the wires so they would not contact the burner and terminals.
With no install instructions (NOT good for diy-ers), looked through reviews and watched video for help. Replacement part - not same as original. Had to use magnifying glass to id the terminals / take a picture before disassembly. reassembled - found out terminals are different & black wire is too short. Took off element - rotated the clips one number counter clockwise, reassembled - removed black wire from harness for extra reach. Hooked up, lowered top for test. power on - everything OK. Power off - complete assembly. Power on - test. Seems to be good. When I called customer service for assistance because there was no instruction, they told me I should contact a local appliance repair person. (big joke).
Other Parts Used:
Douglas from VIRGINIA BCH, VA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The part I ordered has 5 connections and the part to be replaced has 7 connections. I had to ask a friend who is expert in electrical wiring to help.
My friend used a tester to determine where each wire was supposed to connect to. I'm not sure what he did with the extra connections. Bottom line is this part should work but you need an expert to do it for you because it's, like I said, not exactly like the one to be replaced.
Other Parts Used:
Phin from HARRISBURG, PA
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element burned out
The original instructions were to replace burner and plug wires back in the same plug they came from. The problem is that the plug order had changed between parts. Use a pencil to highligt the plug numbers on both new and old plugset, to fint the new plug positions. And need to reorient one of the burners to allow existing wires to reach.
Other Parts Used:
Jeff from BELLEVUE, WA
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
23 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
August 31, 2017
I need part#316418401, it has been replaced by part # 316555800. I am told it is nearly the same except the wiring on the plug end of the new replacement burner does not exactly match the plug on the previous one. How do I ensure the wiring is connected properly (safely and effectively). Thanks.
For model number FEFL63FSB
Hi Mike,
Thank you for the question. If you look closely at the ceramic block and look for the connection labels 1a, 2b etc.The location of the 1b and 2a connection locations have been reversed. The labeling of the connection is on the ceramic block next to the male connector spades but are hard to see and can be easily missed.
Hope this helps!
26 people found this helpful.
Was this helpful?
Thank you for voting!
Laurie
December 2, 2017
The small (inner) element of my dual element does not heat/light. Does that indicate that the entire element needs to be replaced? Thank you so much.
For model number FFEF3018LQF
Hi Laurie, Thank you for the question. Yes the Dual Element is made all as one piece and the full element will need to be replaced. Hope this helps!
17 people found this helpful.
Was this helpful?
Thank you for voting!
Bernice
October 28, 2019
Expandable element heats, but heat cannot be controlled. It gets red hot, but can't be turned down. Does the entire element have to be replaced?
For model number ples389aca
Hello Bernice, thank you for inquiring. This is most likely due to a faulty Switch for the Dual Element. The replacement Dual Infinite Switch for your model range is part number PS444541. Here is a link to some information on our website for testing the Dual Infinite Switch. https://www.partselect.com/Range-Stove-Oven+Infinite-Switch-Testing+repair.htm. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Francine Aubry
February 6, 2020
My front right burner when turned on stays on high. Will not go down when turning dial to lower heat. What part would i need.
For model number CFEF372ES4
Hello Francine, thank you for your question. That is probably an issue with the dual element switch. The switch for this unit is PartSelect Number PS1528745. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Bruce
March 9, 2018
Can I get a diagram of the wiring harness and the connection to the spade terminals on the burner assembly?
For model number GLEFZ384GCA
Hello Bruce,
Thanks for your question. We have a wiring diagram on the main model page for model GLEFZ384GCA. The link is below:
https://partselectcom.azureedge.net/assets/manuals/9CCFC448A78BFB856F2A6646DE975FC58D3FEC91.pdf
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Carlos
July 22, 2021
Right front dual burner does not power off when knob turned to off. What part do i need please?
For model number CPLEF398CCB
Hi Carlos,
Thank you for your question. If the burner does not turn off when you turn it off, the the burner may have shorted. If the electrical connections have fused together, you will need to replace the element. If the burner is not turning off the burner switch may also be the issue. Before inspecting these parts, unplug the oven from the electrical outlet. For the element, check for signs of bubbling, burning, wear, holes, or damage. If none of these signs are present, use a multimeter to test it for continuity. Touch each of the terminals one at a time with one probe while holding the other probe to the outside surface of the element. If either terminal shows continuity, it is defective. To test the entire element for continuity, place each of the probes on the terminals, one on each. The exact reading you should receive varies between models, refer to your owner’s manual to determine what yours should be, but if any element has a reading outside of 19 to 115 ohms, it is defective. If you do not receive the correct readings from the tests above or find damage on your element, you will need a replacement surface burner element. Inspect the switch also for signs of of burning, or overheated wires and terminals. If no issues are found, remove the switch in order to test it for continuity. Using a multimeter on Rx1 mode, test for continuity by touching the L1 and H1 terminals with the probes. Once you have completed that test, touch the probes to the L2 & H2 terminals. If your test results indicate that there is no continuity between one or both sets of terminals, you need a replacement infinite switch. We hope this helps! If you have any questions, please let us know.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Hon
April 17, 2018
The inner burner of the dual burner does not heat, is it the switch or the heating element failure. How do i trouble shoot, thanks
For model number FEFL79DS frigidaire
Hello Hon, thank you for your question. The most likely issue is the switch itself. This link will take you to information on testing the switch itself. You would need an ohm meter to test this switch. I hope this helps!
https://www.partselect.com/Range-Stove-Oven+Infinite-Switch-Testing+repair.htm
2 people found this helpful.
Was this helpful?
Thank you for voting!
Melvin
January 8, 2019
Can i buy the white piece on the element separately?
For model number Ffef3043lsn
Hello Melvin, Thank you for the question. Very sorry but the Limiter is only sold as part of the element. Hope this helps, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dick
November 20, 2019
I may not have been too clear on the element that is not working. Only the large right front element is not working, either the small or large "burner". The switch and potentiometer does not operate the element. Hopefully this will clarify the problem. Only the front right is not operable
Hi Dick,
Thank you for your question. If the large front right burner is not working, the parts that you will need to check are the burner switch that you use to turn the burner on with and the element itself. You will need to use a multimeter to test the parts. For the burner switch, set the multimeter on Rx1 mode, test for continuity by touching the L1 and H1 terminals with the probes. Once you have completed that test, touch the probes to the L2 & H2 terminals. If your test results indicate that there is no continuity between one or both sets of terminals, you need a replacement infinite switch. To test for a shorted element, touch each of the terminals one at a time with one probe while holding the other probe to the outside surface of the element. If either terminal show continuity, it is defective. To test the entire element for continuity, place each of the probes on the terminals, one on each. The exact reading you should receive varies between models, refer to your owner’s manual to determine what yours should be, but if any element has a reading outside of 19 to 115 ohms, it is defective.
If you do not receive the correct readings from the tests above or find damage on your element, you will need a replacement surface burner element. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Abe
November 6, 2018
I need the large element on the left side. Is this part interchangeable with left or right side?
For model number 316555800
Hello Abe, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
