Part Location Diagram of WD01X10107 GE Lower Spray Arm Bearing
See part 453 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Lower Spray Arm Bearing

★★★★★
★★★★★
1 Review
$12.12
  Special Order
PartSelect Number PS258123
Manufacturer Part Number WD01X10107
Manufactured by GE
Product Description

Lower Spray Arm Bearing Specifications

This part is a replacement lower spray arm bearing for your dishwasher. It is made of gray plastic and is approximately ½ inch in diameter. The spray arm bearing reduces friction and allows the spray arm to rotate during the operating cycle. If the spray arm is not rotating or cleaning dishes properly, or the dishwasher is noisy during operation, you may need to replace the spray arm bearing. This is a bearing for the middle spray arm, which is mounted to the bottom of the upper dish rack. The bearing is made of metal and is approximately one inch in diameter. This part is sold individually and is an OEM part.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Noisy
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD01X10107 replaces these:
AP3669207, 943296, WD1X10107
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 2.9 / 5.0, 3 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Leak from the bottom center
The connector pump had a pinhole leak at the seam (new part did not have seams). Also replaced the sump inlet which looked worn and the impeller.

Lay dishwasher on it's back to access the bottom. Loosen all clamps. Remove both U shaped holders on the sump inlet. Remove screws holding the drain motor. Pull out the pump motor and sump inlet. Connector pump can be unscrewed from the bottom.

Replace parts and reassemble. It isn't that bad once you start disassembly, especially for anyone somewhat handy.
Other Parts Used:
Pump Connector Inlet Sump
  • Ashraf from Merrick, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
31 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control module went out - causing the heating element to super heat, melting several of the plastic interior parts
I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.
Other Parts Used:
Sump Filter and Cover Dishrack Rollers and Axles - Kit of 8 BASKET ASM SILVERWARE Dishwasher Detergent Dispenser Pump Upper Spray Arm MODULE CONTROL Assembly DOME FLOAT Tine Retainer/Clip Tine Retainer Fine Filter Screw 8-32 B HXW 1.13 Stainless Steel Upper Spray Arm Bearing Fine Filter Hub Nut
  • Mark from Omaha, NE
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
31 of 191 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front gasket leak, jets clogged, keypad shorted out
Based on parts select diagrams, I removed the sprayer arms and replaced them along with new washers/bushings.
I simply pulled the front gasket out
Other Parts Used:
Lower Spray Arm - Gray Upper Spray Arm Keypad - Black Middle Spray Arm Tub Gasket Upper Spray Arm Bearing
  • Robert from Sacramento, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
8 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Yuyuan
August 10, 2017
Hi, could some expert please tell me why i need this bearing: Wd01x10107 GE dishwasher bearing for spray arm low? What will happen if it is not there? Appreciate it!
For model number GLD4560V00SS
PartSelect logo
Hi Yuyuan, Thank you for your inquiry. The bearing is necessary because without it the lower spray arm would not rotate correctly and there be noise coming from the bearing. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
;
Model Cross Reference
This part works with the following models:
PartSelect Number: PS258123
Manufacturer Part Number: WD01X10107
Brand
Model Number
Description
General Electric
40201-0
Dishwasher
General Electric
402011
Dishwasher
General Electric
40205-0
Dishwasher
General Electric
402051
Dishwasher
General Electric
40206-0
Dishwasher
General Electric
402061
Dishwasher
General Electric
402070
Dishwasher
General Electric
403110
Dishwasher
General Electric
403111
Dishwasher
General Electric
405010
Dishwasher
General Electric
405011
Dishwasher
General Electric
405012
Dishwasher
General Electric
405050
Dishwasher
General Electric
405051
Dishwasher
General Electric
405052
Dishwasher
General Electric
405060
Dishwasher
General Electric
405061
Dishwasher
General Electric
405062
Dishwasher
General Electric
4070100
Dishwasher
General Electric
4070110
Dishwasher
General Electric
4070500
Dishwasher
General Electric
4070510
General Electric
4070600
Dishwasher
General Electric
4070610
Dishwasher
General Electric
4070800
Dishwasher
General Electric
4070810
General Electric
4071100
Dishwasher
General Electric
4071110
General Electric
4071120
Dishwasher
General Electric
4071500
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service