Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Chris J - October 27, 2021
Verified Purchase
Not As Advertised
Part fit was not correct - had to drill new mounting holes
★★★★★
★★★★★
Walter D - May 2, 2020
Verified Purchase
I had to do some modifications but the part works perfectly
The part was in good condition and came fast. It was not quite right for my oven as the centers which connect to the back of the oven were 2 and 3/4" centers and my old ones were 1 and 3/4". The backplate was of a smaller size. The larger centers went thru the old opening and connected to the wires, however I had to make a new backplate (larger) to cover the old opening as well as drill new 2 and 3/4" holes for the heating rods and new holes for attaching it with self tapping metal screws. All in all though everything worked perfectly. Fortunately I am fairly handy. ( My stove was an older model Kenmore and you were unable to locate the model # I gave you. ) I would use your company again. Thanks
★★★★★
★★★★★
Cheryl M - November 12, 2019
Verified Purchase
Great!
Received the part in one day. Watched a YouTube video and installed it myskefnin minutes. Saved over one hundred dollars. Recommend
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 153 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bake element cracked on its own
Flipped the breaker. Removed shelf, Find the right size nut socket, unscrew the two screws, pull the element out a little bit, disconnect the wires (on pretty tight), pull out element, clean out any mess in the oven, compare element with new one to make sure its the same size and such, connect wires to new element, replace screws, flip breaker back, turn on for a few minutes to make sure it works. Piece of cake.
Other Parts Used:
Timothy from Cordova, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
623 of 633 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven took 30 minutes to get to 380 degrees-no hotter
First I searched this site and read about the repairs - which made me feel like my husband could do it with ease. Then he removed two screws inside the oven, removed the broken element (didn't know it was broken til removed) and replaced the new one - just like that! The real key was being able to read how it was for other people who had already done it. That's the only reason I'm submitting my storey. Thanks
Other Parts Used:
Sandra from Hayward, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
387 of 391 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element burned out
I turned off the power to the oven at the breaker. Then I removed the two screws from the old element, pulled the old element out about 3 inches and disconnected the wires from the element and installed the new one.
Other Parts Used:
Laura from N. Little Rock, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
202 of 271 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lower bake element broken
Removed 2 screws that hold element and pulled old element out about 2 inches to disconnect the wires from the old element. Connected the new element and remounted to rear oven wall. Very simple and saved a visit from the appliance repairman.
Other Parts Used:
David from Nye, MT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
107 of 169 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element burnt in half
TURNED OFF CIRCUIT BREAKER. Removed nut, washer and screw, pulled out electric burner about three inches, disconnected electric terminals and removed damaged element. Inserted new element into oven, connected electric terminals, pushed electric prongs back in, screwed element to back wall of oven....DONE Easy as 123
Other Parts Used:
Betty from Athelstane, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
92 of 154 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Daughter dropped dish on element......broke it!
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires the repeated the process to complete the installation. Relly easy.
Other Parts Used:
Danny from Trinity, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
73 of 75 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element bad
Inside oven, remove two screws that hold element to back wall, pull element out three or so inches to get to wire clip connections, unclip wires, remove bad element, put new element in in reverse order of taking out bad element, just that simple. Also this site was so easy to use, plus the shipping time was unbelieveably short, even a company service man couldn't have been that quick, or as reasonable. Thanks a bunch!!
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...) discovering a burnt spot in the element sent me searching for a new one. I couldn't find any locally, so I continued my search to the internet. This is when I came in contact with PartsSelect.com . They made identifing the part and ordering so easy it was unbelievable. Super fast deliverey astounded me as well. The installation of the new element was reverse of the old. All of the dimensions and info for the part were right there on this site. Thanks
Other Parts Used:
Steve from Clarksville, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
12 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not preheat - took over 1 hr to get to 350 degrees
Turned the range/oven off at the breaker box. Pulled all the racks out. Unscrewed two screws holding lower heating element in. Pulled the heating element out to expose connections. Unhooked connections, plugged in new element. Replaced the screws. Turned breaker back one. Pretty simple!
Other Parts Used:
Tim from Mt Juliet, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken oven element.
DO NOT ATTEMPT THIS REPAIR UNTIL THE RANGE IS UNPLUGGED AND THE CIRCUIT BREAKER IS OFF!!!!!!
Very easy repair, but, either there is a minor amount of current flowing through the element at all times, or the off switch wasn't working when I started. didn't turn the breaker off, after I removed the nuts, as I was pulling the element to reveal the terminals, the terminals arc'd on the oven wall. BIG SPARKS!
After I turned the breaker off and started again. No problems.
Other Parts Used:
NICHOLAS from BALTIMORE, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
43 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dorothy Moore
October 7, 2017
What is the width between the prongs that fit into the oven. My old one is three inches
For model number JSC26GP
Hi Dorothy,
Thank you for your inquiry. The bake element on our website sits on a one inch grid square. The width between the 2 prongs is approximately 2 1/2 inches. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
John
December 2, 2019
GE spacemaker cooking center jhp56g lower oven bottom element no longer working. Part ps249247 shows screws above the element but my current element has screws horizontal left and right. Can you let me know the part# i need ?Thanks
For model number JHP56G OD2AD
Hello John and thanks for writing.
The manufacturer tells us that bake element Part Number: PS249466 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
Hello, i am having trouble figuring out what replacement bake element to buy for my (apparently pretty old) GE oven. I would be grateful for any assistance you could offer. Thank you very much!
For model number J BP23G S1WH
Hello Rebecca thank you for your question. The bake element for your unit is PartSelect Number: PS249466. Please enter the part number into the site for current price and availability. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Stephanie
November 13, 2018
Bake element had some odd "episode" when a bit of roasted pumpkin water splashed on it. It went foom and a white light glowed intensely for a few seconds until i switched the oven off. It then threatened on and off to catch fire, eventually my boyfriend turned the breaker off and the red glow went away. Flipping the switch back on and turning the oven on caused it to glow red again so we're assuming we need to replace. Given the age we're assuming it was more of an eventuality because i've made much bigger messes in ovens and not had that happen!We're farmers so calling someone out to "take a look" is not in the budget, seems an easy enough fix with the right tool, can you confirm the suspicion that it needs to be changed out please? and if so, confirm my google result part number of wb44k5012?
thanks very much!!!
For model number 9119388610
Hello Stephanie, Thank you for the question. We do suggest having before it causes a short and burns the control board out and makes it a more expensive repair. I have researched the model you have provided and have found the part you’re looking for is Manufacturer Part Number WB44K5012. Thank you for your inquiry, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
July 23, 2019
My bake element has a GE part number wb44m00001. Do you have a replacement?
For model number WB44M00001
Hello Mike, thank you for your question. The replacement for that unit is WB44K5012. Please enter the part number into the site for current price and availability. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Debbie Robbins
July 23, 2019
Which baking element do i need for my 30” GE profile slide in glass top stove. We bought it in 1998. Thanks!
For model number JSP4080W1BB
Hello Debbie, thank you for your question. The bake element for this unit is PartSelect Number: PS249247. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
July 10, 2019
Do you have a part number for the bottom bake element for this stovetop?
For model number JDS26B0W2WH
Hello,
The element needed is PS249247.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bruce
November 19, 2018
I need the part number for a bake element. Thank you.
For model number JDP36BW2WH
Hi Bruce, thank you for your question. This is your bake element. The part information is above. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rick
May 27, 2019
I need the bake element but can't find this model number on any website. The unit is a drop-in model, probably about 15 years old.Thanks
For model number JDP36BOW3AD
Hello Rick, thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for isPartSelect Number: PS249247. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cindy
September 9, 2019
I have a GE oven from the 70`s . I cannot read the model number. I need to get a new baking element. Am I out of luck?
Hi Cindy,
Thank you for your question. It is always best to have the model number to make sure the correct part is ordered. If the model number on your oven is too hard to make out, you can do a general search for the part on our website. Here is a link from our website where you may do a general search for the part, https://www.partselect.com/PartSearchWizard.aspx?Appliance=Range. If you order the part and it is not the correct one, we have a 30 day return policy. Here is a link to our policy, https://www.partselect.com/Thirty-Day-Returns.htm. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
